Mailinglist Archive: opensuse-mobile-de (91 mails)
| < Previous | Next > |
Re: [suse-laptop] Soundprobleme auf einem Gericom Phantom mit Crystal4581 Soundkarte
- From: Andreas Kretzer <andi@xxxxxxxxxxxxxxxxx>
- Date: Wed, 12 Sep 2001 10:49:15 +0200
- Message-id: <3B9F218B.9A611D7B@xxxxxxxxxxxxxxxxx>
Andreas Kretzer schrieb:
> Ich überprüfe morgen früh nochmal genau meine Konfiguration und
> schicke Dir (via Mailing-Liste) die genauen Einstellungen mit denen es
> bei mir läuft.
Also gestern war ja der Hammer in Amiland los. Aber jetzt und hier meine
Einstellungen (das auskommentieren einiger Einträge ist tatsächlich nötig - siehe
Kommentar in der Datei):
- /etc/modules.conf:
# alias char-major-14 off
# alias sound off
# alias midi off
alias char-major-14 soundcore
alias snd-card-0 cs4281
alias snd-slot-0 snd-card-0
(anschließend ein depmod aufrufen)!
Ich bin mir nicht ganz sicher, was ich sonst noch verändert habe, daher hier
nochmal meine komplette /etc/modules.conf als Referenz:
---------------------------------------------------------------------------------------
#
# YaST2: Network card
#
alias eth0 eepro100
alias eth1 off
alias tr0 off
alias scsi_hostadapter off
alias fb0 off
# only used for Mylex or Compaq Raid as module
alias block-major-48 off
alias block-major-49 off
alias block-major-72 off
alias block-major-73 off
# only needed for fifth and sixth IDE adaptor
alias block-major-56 off
alias block-major-57 off
# mouse (for older busmice)
alias char-major-10 off
# If you want to use the new autofs4
# alias autofs autofs4
# For parallel port devices, uncomment the following two lines and change
# "frpw" to the protocol type you use
# post-install paride insmod frpw
# pre-remove paride rmmod frpw
#*****************************************************************************
# If you want to use the kernel sound drivers instead of ALSA (SuSE's default
# sound solution) please put comment signs in front of the following
# entries and remove any previous ALSA configuration from YaST2 or alsaconf
# from the end of this file. Then choose one of the sample configurations
# below. Uncomment all lines starting with 'alias', 'options', pre- or post-
# install' within one configuration and modify the parameters according to
# your needs (e.g. the resources chosen for this device in /etc/isapnp.conf).
#*****************************************************************************
# alias char-major-14 off
# alias sound off
# alias midi off
#*****************************************************************************
# module : ad1816.o AD1816 chip
#
# Supported cards :
#
# Terratec Base 1/64
# HP Kayak
# Acer FX-3D
# SY-1816
# Highscreen Sound-Boostar 32 Wave 3D
# Highscreen Sound-Boostar 16
#
# Documentation available in /usr/src/linux/Documentation/sound/AD1816
# and in /usr/src/linux/drivers/sound/ad1816.c .
#
# Possible configuration :
#
# alias char-major-14 ad1816
# post-install ad1816 modprobe "-k" opl3
# post-install ad1816 modprobe "-k" mpu401
# options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# options opl3 io=0x0388
# options mpu401 io=0x0330 irq=9
#
#*****************************************************************************
# module : ad1848.o AD1848/CS4231/CS4248 Chip
# --> Windows Sound System (MSS/WSS)
#
# A variety of common ISA soundcards are
# compatible with this family of chips.
#
# Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS .
# Usually this module is used in conjunction with other higher level sound
# modules.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 ad1848
# options ad1848 io=0x530 irq=7 dma=0 dma2=3
#
#*****************************************************************************
# module : cs4232.o Crystal 423x chipsets
#
# Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This
# chip is often used together with other sound hardware.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 cs4232
# post-install cs4232 modprobe "-k" opl3
# options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
# options opl3 io=0x388
#
#*****************************************************************************
# module : es1370.o Ensoniq 1370 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1370 and
# /usr/src/linux/drivers/sound/es1370.c .
#
# alias char-major-14 es1370
# options es1370 joystick=1
#
#*****************************************************************************
# module : es1371.o Creative Ensoniq 1371 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1371 and
# /usr/src/linux/drivers/sound/es1371.c .
#
# alias char-major-14 es1371
# options es1371 joystick=0x200
#
#*****************************************************************************
# module : mad16.o MAD16
#
# Possible configuration :
#
# alias char-major-14 mad16
# options sb mad16=1
# options mad16 io=0x530 irq=7 dma=0 dma16=1
#
#*****************************************************************************
# module : sb.o Soundblaster 16, SB Pro + Clones
# Also needed for AWE32/64
#
# Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster
# and in /usr/src/linux/drivers/sound/sb.c .
#
# Possible configuration :
#
# alias char-major-14 sb
# post-install sb /sbin/modprobe "-k" "adlib_card"
# options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
# options adlib_card io=0x388
#
#*****************************************************************************
# module : trix.o MediaTrix AudioTrix Pro
#
# alias char-major-14 trix
# pre-install trix modprobe "-k"
#
#*****************************************************************************
# module : wavefront.o Turtle Beach Maui, Tropez, Tropez Plus
#
# Comment from /usr/src/linux/Documentation/sound/Wavefront :
# (please read that file !)
# "the wavefront options "io" and "irq" ***MUST*** match the "synthio"
# and "synthirq" cs4232 options."
#
# Possible configuration :
#
# alias char-major-14 wavefront
# alias synth0 wavefront
# alias mixer0 cs4232
# alias audio0 cs4232
# pre-install wavefront modprobe "-k" "cs4232"
# post-install wavefront modprobe "-k" "opl3"
# options wavefront io=0x200 irq=9
# options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0
# options opl3 io=0x388
#
#*****************************************************************************
#*****************************************************************************
# Example configs for ALSA
# You don't need to run isapnp with ALSA, it has full PnP support.
# See /usr/share/doc/packages/alsa/README.SuSE
#*****************************************************************************
#
# ALSA native device support and OSS emulation support. Uncomment these
# lines to enable ALSA:
#
alias char-major-14 soundcore
#
# YaST2: sound cards support
#
alias char-major-116 snd
alias snd-card-0 cs4281
alias snd-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
#
#Set mixer to stored defaults (with alsactl store)
post-install snd alsactl restore
# Uncomment this line too, you can setup your ALSA device permissions here:
#
options snd snd_cards_limit=1 snd_device_gid=17 snd_device_mode=0666 snd_device_uid=0 snd_major=116
#
# ALSA Card examples:
#
# Creative SB16 PnP (ALSA will do isapnp itself per default):
#
# alias snd-card-0 snd-card-sb16
# options snd-card-sb16 snd_index=0
#
# Creative SB Live! (ALSA will find it with the kernel's PCI support):
#
# alias snd-card-0 snd-card-emu10k1
# options snd-card-emu10k1 snd_index=0
#
# An other Example: IBM ThinkPad 600E with an CS423x emulated by an CS4610/11
# In this case, the native PCI Sound is expected to not work, but some chips
# like the CS4610/11 have a very good emulation for older ISA non-PNP cards
# like the CS423x family. The CS4610/11 e.g. has an good emulation of the
# CS4231/2 cards and the CS4239 card, the snd-card-cs4236 e.g. supports the
# CS4239 emulation of the CS4610/11 in the IBM ThinkPad 600E:
#
# alias snd-card-0 snd-card-cs4236
# options snd-card-cs4236 snd_index=0 snd_port=0x530 snd_cport=0x538 snd_irq=5 snd_dma1=1 snd_dma2=0 snd_isapnp=0
#
# You MUST suppy all required snd_port, snd_irq and snd_dma parameter AND
# the snd_isapnp=0 option to the snd-card if the card is not shown by pnpdump,
# otherwise the ALSA driver will try to do PnP and will not find your card.
#
# This is an example of an post-install you may want use:
#
# post-install snd amixer set Master 100% unmute;amixer set PCM 100% unmute; amixer set Aux,1 100% unmute
# (Aux,1 is the CDROM line-in in this ThinkPad 600E)
#
# For more info about the powerful amixer look into "man amixer".
#
# This will open your mixer channels in case you did not store a mixer setup
# for your card in /etc/asound.conf and you will have a default configuration.
# To test your new setup, do:
#
# depmod -a
# rcalsasound restart
#
# If the modules were loaded, you can check them with lsmod.
#
# Open and unmute the mixer channels, e.g. with alsamixer, gamix or your
# OSS mixer (alsamixer: unmute the Master and PCM channels with ",." and
# raise them with the up/down-arrow keys, man alsamixer explains all the keys)
#
# To play a sound sample run:
#
# aplay /usr/share/sounds/alsa/whistle.au
#
# For a list of supported soundcards look into
# /usr/share/doc/packages/alsa/cards.txt
# and browse the other files there and www.alsa-project.org
# for more information.
#*****************************************************************************
########################################################################
# Options; these are examples; uncommented and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1
# post-install bttv /sbin/modprobe "-k" tuner; # /sbin/modprobe "-k" msp3400
options dummy0 -o dummy0
options dummy1 -o dummy1
# cipe section
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0 cipe_maxdev=2
# block dev aliases
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 off
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 off
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 off
alias block-major-34 off
# network block device
alias block-major-43 off
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
alias char-major-10-135 off
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-240 agpgarti810
alias char-major-15 off
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
# fb
alias char-major-29 off
alias char-major-30 iBCS
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
alias char-major-43 off
alias char-major-44 off
alias char-major-45 off
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 bttv
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89 i2c-dev
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
if `kernelversion` == "2.2"
alias char-major-144 pppox
post-install pppox insmod mssclampfw
pre-remove pppox rmmod mssclampfw
else
alias char-major-108 ppp_async
alias char-major-144 pppoe
alias net-pf-24 pppoe
endif
# IrDA
alias char-major-161 ircomm-tty
# USB
alias char-major-166 acm
# Moxa Multiport Serial Boards
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias char-major-195 NVdriver
alias char-major-206 osst
alias char-major-240 usb-serial
alias binfmt-332 iBCS
alias binfmt-518 iBCS
alias binfmt-002c iBCS
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
alias tty-ldisc-7 off
# IrDA
alias tty-ldisc-11 irtty
# alias ax0 mkiss
alias ax0 off
# alias sp0 6pack
alias sp0 off
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
if `kernelversion` == "2.2"
alias ppp0 ppp
alias ppp1 ppp
alias tty-ldisc-3 ppp
else
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
endif
alias plip0 plip
alias plip1 plip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# alias net-pf-3 off
alias net-pf-4 ipx
# alias net-pf-4 off
alias net-pf-5 appletalk
# alias net-pf-5 off
alias net-pf-6 netrom
# alias net-pf-6 off
alias net-pf-10 ipv6
# alias net-pf-10 off
alias net-pf-11 rose
# alias net-pf-11 off
alias net-pf-17 af_packet
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
pre-install mga modprobe "-k" "agpgart"
pre-install r128 modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# end of common part for modules.conf
# begin of i386 part for modules.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwavedd
# options mwavedd dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# end of i386 part for modules.conf
# Added by YaST2, do not change
alias usb-hostadapter usb-uhci
# lt_drivers: autoloading and insertion parameter usage
# options lt_modem vendor_id=0x115d device_id=0x0420 Forced=3,0x130,0x2f8
# section for lt_drivers ends
alias char-major-62 lt_serial
below ltmodem isa-pnp
---------------------------------------------------------------------------------------
Wie Du übrigens ganz am Ende siehst, habe ich ein Device lt_modem. Das ist
das eingebaute Modem (Lucent WinModem). Die Treiber dazu bekommst Du
bei www.heby.de/ltmodem. Allen anderen WinModem-Geschädigten sei die
Site 'www.linmodems.org' empfohlen, wo offensichtlich auch Treiber für andere
Hersteller bereitstehen (oder zumindestens Links dahin).
Gruß
Andreas
> Ich überprüfe morgen früh nochmal genau meine Konfiguration und
> schicke Dir (via Mailing-Liste) die genauen Einstellungen mit denen es
> bei mir läuft.
Also gestern war ja der Hammer in Amiland los. Aber jetzt und hier meine
Einstellungen (das auskommentieren einiger Einträge ist tatsächlich nötig - siehe
Kommentar in der Datei):
- /etc/modules.conf:
# alias char-major-14 off
# alias sound off
# alias midi off
alias char-major-14 soundcore
alias snd-card-0 cs4281
alias snd-slot-0 snd-card-0
(anschließend ein depmod aufrufen)!
Ich bin mir nicht ganz sicher, was ich sonst noch verändert habe, daher hier
nochmal meine komplette /etc/modules.conf als Referenz:
---------------------------------------------------------------------------------------
#
# YaST2: Network card
#
alias eth0 eepro100
alias eth1 off
alias tr0 off
alias scsi_hostadapter off
alias fb0 off
# only used for Mylex or Compaq Raid as module
alias block-major-48 off
alias block-major-49 off
alias block-major-72 off
alias block-major-73 off
# only needed for fifth and sixth IDE adaptor
alias block-major-56 off
alias block-major-57 off
# mouse (for older busmice)
alias char-major-10 off
# If you want to use the new autofs4
# alias autofs autofs4
# For parallel port devices, uncomment the following two lines and change
# "frpw" to the protocol type you use
# post-install paride insmod frpw
# pre-remove paride rmmod frpw
#*****************************************************************************
# If you want to use the kernel sound drivers instead of ALSA (SuSE's default
# sound solution) please put comment signs in front of the following
# entries and remove any previous ALSA configuration from YaST2 or alsaconf
# from the end of this file. Then choose one of the sample configurations
# below. Uncomment all lines starting with 'alias', 'options', pre- or post-
# install' within one configuration and modify the parameters according to
# your needs (e.g. the resources chosen for this device in /etc/isapnp.conf).
#*****************************************************************************
# alias char-major-14 off
# alias sound off
# alias midi off
#*****************************************************************************
# module : ad1816.o AD1816 chip
#
# Supported cards :
#
# Terratec Base 1/64
# HP Kayak
# Acer FX-3D
# SY-1816
# Highscreen Sound-Boostar 32 Wave 3D
# Highscreen Sound-Boostar 16
#
# Documentation available in /usr/src/linux/Documentation/sound/AD1816
# and in /usr/src/linux/drivers/sound/ad1816.c .
#
# Possible configuration :
#
# alias char-major-14 ad1816
# post-install ad1816 modprobe "-k" opl3
# post-install ad1816 modprobe "-k" mpu401
# options ad1816 io=0x530 irq=5 dma=1 dma2=3 ad1816_clockfreq=33000
# options opl3 io=0x0388
# options mpu401 io=0x0330 irq=9
#
#*****************************************************************************
# module : ad1848.o AD1848/CS4231/CS4248 Chip
# --> Windows Sound System (MSS/WSS)
#
# A variety of common ISA soundcards are
# compatible with this family of chips.
#
# Documentation available in /usr/src/linux/drivers/sound/ad1848.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/README.OSS .
# Usually this module is used in conjunction with other higher level sound
# modules.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 ad1848
# options ad1848 io=0x530 irq=7 dma=0 dma2=3
#
#*****************************************************************************
# module : cs4232.o Crystal 423x chipsets
#
# Documentation available in /usr/src/linux/drivers/sound/cs4232.c (search
# for MODULE_PARM) and in /usr/src/linux/Documentation/sound/CS4232 . This
# chip is often used together with other sound hardware.
#
# Possible configuration for stand-alone usage :
#
# alias char-major-14 cs4232
# post-install cs4232 modprobe "-k" opl3
# options cs4232 io=0x534 irq=5 dma=1 dma2=0 mpuio=0x330 mpuirq=9
# options opl3 io=0x388
#
#*****************************************************************************
# module : es1370.o Ensoniq 1370 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1370 and
# /usr/src/linux/drivers/sound/es1370.c .
#
# alias char-major-14 es1370
# options es1370 joystick=1
#
#*****************************************************************************
# module : es1371.o Creative Ensoniq 1371 Chipsatz (--> PCI64/128)
#
# Supported cards :
#
# Creative Labs PCI64/128
#
# Documentation available at /usr/src/linux/Documentation/sound/es1371 and
# /usr/src/linux/drivers/sound/es1371.c .
#
# alias char-major-14 es1371
# options es1371 joystick=0x200
#
#*****************************************************************************
# module : mad16.o MAD16
#
# Possible configuration :
#
# alias char-major-14 mad16
# options sb mad16=1
# options mad16 io=0x530 irq=7 dma=0 dma16=1
#
#*****************************************************************************
# module : sb.o Soundblaster 16, SB Pro + Clones
# Also needed for AWE32/64
#
# Dcoumentation available in /usr/src/linux/Documentation/sound/Soundblaster
# and in /usr/src/linux/drivers/sound/sb.c .
#
# Possible configuration :
#
# alias char-major-14 sb
# post-install sb /sbin/modprobe "-k" "adlib_card"
# options sb io=0x220 irq=7 dma=1 dma16=5 mpu_io=0x330
# options adlib_card io=0x388
#
#*****************************************************************************
# module : trix.o MediaTrix AudioTrix Pro
#
# alias char-major-14 trix
# pre-install trix modprobe "-k"
#
#*****************************************************************************
# module : wavefront.o Turtle Beach Maui, Tropez, Tropez Plus
#
# Comment from /usr/src/linux/Documentation/sound/Wavefront :
# (please read that file !)
# "the wavefront options "io" and "irq" ***MUST*** match the "synthio"
# and "synthirq" cs4232 options."
#
# Possible configuration :
#
# alias char-major-14 wavefront
# alias synth0 wavefront
# alias mixer0 cs4232
# alias audio0 cs4232
# pre-install wavefront modprobe "-k" "cs4232"
# post-install wavefront modprobe "-k" "opl3"
# options wavefront io=0x200 irq=9
# options cs4232 synthirq=9 synthio=0x200 io=0x530 irq=5 dma=1 dma2=0
# options opl3 io=0x388
#
#*****************************************************************************
#*****************************************************************************
# Example configs for ALSA
# You don't need to run isapnp with ALSA, it has full PnP support.
# See /usr/share/doc/packages/alsa/README.SuSE
#*****************************************************************************
#
# ALSA native device support and OSS emulation support. Uncomment these
# lines to enable ALSA:
#
alias char-major-14 soundcore
#
# YaST2: sound cards support
#
alias char-major-116 snd
alias snd-card-0 cs4281
alias snd-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
#
#Set mixer to stored defaults (with alsactl store)
post-install snd alsactl restore
# Uncomment this line too, you can setup your ALSA device permissions here:
#
options snd snd_cards_limit=1 snd_device_gid=17 snd_device_mode=0666 snd_device_uid=0 snd_major=116
#
# ALSA Card examples:
#
# Creative SB16 PnP (ALSA will do isapnp itself per default):
#
# alias snd-card-0 snd-card-sb16
# options snd-card-sb16 snd_index=0
#
# Creative SB Live! (ALSA will find it with the kernel's PCI support):
#
# alias snd-card-0 snd-card-emu10k1
# options snd-card-emu10k1 snd_index=0
#
# An other Example: IBM ThinkPad 600E with an CS423x emulated by an CS4610/11
# In this case, the native PCI Sound is expected to not work, but some chips
# like the CS4610/11 have a very good emulation for older ISA non-PNP cards
# like the CS423x family. The CS4610/11 e.g. has an good emulation of the
# CS4231/2 cards and the CS4239 card, the snd-card-cs4236 e.g. supports the
# CS4239 emulation of the CS4610/11 in the IBM ThinkPad 600E:
#
# alias snd-card-0 snd-card-cs4236
# options snd-card-cs4236 snd_index=0 snd_port=0x530 snd_cport=0x538 snd_irq=5 snd_dma1=1 snd_dma2=0 snd_isapnp=0
#
# You MUST suppy all required snd_port, snd_irq and snd_dma parameter AND
# the snd_isapnp=0 option to the snd-card if the card is not shown by pnpdump,
# otherwise the ALSA driver will try to do PnP and will not find your card.
#
# This is an example of an post-install you may want use:
#
# post-install snd amixer set Master 100% unmute;amixer set PCM 100% unmute; amixer set Aux,1 100% unmute
# (Aux,1 is the CDROM line-in in this ThinkPad 600E)
#
# For more info about the powerful amixer look into "man amixer".
#
# This will open your mixer channels in case you did not store a mixer setup
# for your card in /etc/asound.conf and you will have a default configuration.
# To test your new setup, do:
#
# depmod -a
# rcalsasound restart
#
# If the modules were loaded, you can check them with lsmod.
#
# Open and unmute the mixer channels, e.g. with alsamixer, gamix or your
# OSS mixer (alsamixer: unmute the Master and PCM channels with ",." and
# raise them with the up/down-arrow keys, man alsamixer explains all the keys)
#
# To play a sound sample run:
#
# aplay /usr/share/sounds/alsa/whistle.au
#
# For a list of supported soundcards look into
# /usr/share/doc/packages/alsa/cards.txt
# and browse the other files there and www.alsa-project.org
# for more information.
#*****************************************************************************
########################################################################
# Options; these are examples; uncommented and modify the lines you need
########################################################################
# options cdu31a cdu31a_port=0x340 cdu31a_irq=0
# options sbpcd sbpcd=0x230,1
# options aztcd aztcd=0x320
# options cm206 cm206=0x340,11
# options gscd gscd=0x340
# options mcd mcd=0x300,11
# options mcdx mcdx=0x300,11
# options optcd optcd=0x340
# options sjcd sjcd_base=0x340
# options sonycd535 sonycd535=0x340
# options isp16 isp16_cdrom_base=0x340 isp16_cdrom_irq=0 isp16_cdrom_dma=0 isp16_cdrom_type=Sanyo
# options ne io=0x300 irq=5
# Use this if you have two cards:
# options ne io=0x300,0x320 irq=5,7
# options tulip options=0
# options 3c59x options=0
# options 3c501 io=0x280 irq=5
# options 3c503 io=0x280 irq=5 xcvr=0
# options 3c505 io=0x300 irq=10
# options 3c507 io=0x300 irq=10
# options 3c509 irq=10
# options at1700 io=0x260 irq=10
# options smc-ultra io=0x200 irq=10
# options wd io=0x300 irq=10
# options smc9194 io=0x200 irq=10 ifport=0
# options e2100 io=0x300 irq=10 mem=0xd0000 xcvr=0
# options depca io=0x200 irq=7
# options ewrk3 io=0x300 irq=10
# options eexpress io=0x300 irq=10
# options hp-plus io=0x300 irq=10
# options hp io=0x300 irq=10
# options hp100 hp100_port=0x380
# options apricot io=0x300 irq=10
# options ac3200 io=0x300 irq=10 mem=0xd0000
# options de620 io=0x378 irq=7 bnc=1
# options ibmtr io=0xa20
# options arcnet io=0x300 irq=10 shmem=0xd0000
# options plip io=0x378 irq=7
# options eepro io=0x260 irq=10 mem=0x6000
# options eth16i io=0x2a0 irq=10
# options fmv18x io=0x220 irq=10
# options ni52 io=0x360 irq=9 memstart=0xd0000 memend=0xd4000
# options bttv pll=1 radio=0 card=0
# options tuner type=0
# options msp3400 once=1 simple=1
# post-install bttv /sbin/modprobe "-k" tuner; # /sbin/modprobe "-k" msp3400
options dummy0 -o dummy0
options dummy1 -o dummy1
# cipe section
alias cipcb0 cipcb
alias cipcb1 cipcb
options cipcb cipe_debug=0 cipe_maxdev=2
# block dev aliases
alias block-major-1 rd
alias block-major-2 floppy
alias block-major-3 off
alias block-major-7 loop
alias block-major-8 sd_mod
alias block-major-11 sr_mod
alias block-major-13 xd
alias block-major-15 cdu31a
alias block-major-16 gscd
alias block-major-17 optcd
alias block-major-18 sjcd
alias block-major-20 mcdx
alias block-major-22 off
alias block-major-23 mcd
alias block-major-24 sonycd535
alias block-major-25 sbpcd
alias block-major-26 sbpcd
alias block-major-27 sbpcd
alias block-major-28 sbpcd
alias block-major-29 aztcd
alias block-major-32 cm206
alias block-major-33 off
alias block-major-34 off
# network block device
alias block-major-43 off
alias block-major-45 pd
alias block-major-46 pcd
alias block-major-47 pf
alias char-major-6 lp
alias char-major-9 st
alias char-major-10-130 softdog
alias char-major-10-135 off
alias char-major-10-175 agpgart
alias char-major-10-181 toshiba
alias char-major-10-240 agpgarti810
alias char-major-15 off
alias char-major-19 cyclades
alias char-major-20 cyclades
alias char-major-21 sg
alias char-major-27 ftape
# fb
alias char-major-29 off
alias char-major-30 iBCS
alias char-major-36 netlink_dev
# alias char-major-43 hisax
# alias char-major-44 hisax
# alias char-major-45 hisax
alias char-major-43 off
alias char-major-44 off
alias char-major-45 off
alias char-major-48 riscom8
alias char-major-49 riscom8
alias char-major-67 coda
alias char-major-75 specialix
alias char-major-76 specialix
alias char-major-81 bttv
alias char-major-83 vtx
options vtx quiet=1
alias char-major-89 i2c-dev
alias char-major-96 pt
alias char-major-97 pg
alias char-major-107 3dfx
alias char-major-109 lvm-mod
# ppp over ethernet
# the kernel 2.2 uses pppox
# the kernel 2.4 uses pppoe
if `kernelversion` == "2.2"
alias char-major-144 pppox
post-install pppox insmod mssclampfw
pre-remove pppox rmmod mssclampfw
else
alias char-major-108 ppp_async
alias char-major-144 pppoe
alias net-pf-24 pppoe
endif
# IrDA
alias char-major-161 ircomm-tty
# USB
alias char-major-166 acm
# Moxa Multiport Serial Boards
alias char-major-172 moxa
alias char-major-173 moxa
# options moxa type=2,,, baseaddr=0xdc000,,, numports=8,,,
alias char-major-174 mxser
alias char-major-175 mxser
# options mxser ioaddr=0x180
#alias char-major-180 usbcore
alias char-major-195 NVdriver
alias char-major-206 osst
alias char-major-240 usb-serial
alias binfmt-332 iBCS
alias binfmt-518 iBCS
alias binfmt-002c iBCS
alias binfmt-204 binfmt_aout
alias binfmt-263 binfmt_aout
alias binfmt-264 binfmt_aout
alias binfmt-267 binfmt_aout
alias binfmt-0064 binfmt_aout
alias binfmt-0008 binfmt_aout
alias iso9660 isofs
alias tty-ldisc-1 slip
alias tty-ldisc-5 mkiss
# alias tty-ldisc-7 6pack
alias tty-ldisc-7 off
# IrDA
alias tty-ldisc-11 irtty
# alias ax0 mkiss
alias ax0 off
# alias sp0 6pack
alias sp0 off
alias slip0 slip
alias sl0 slip
alias slip1 slip
alias sl1 slip
# the kernel 2.2 uses ppp.o as ppp driver,
# the kernel 2.4 uses ppp_generic.o
if `kernelversion` == "2.2"
alias ppp0 ppp
alias ppp1 ppp
alias tty-ldisc-3 ppp
else
alias ppp0 ppp_generic
alias ppp1 ppp_generic
alias tty-ldisc-3 ppp_async
endif
alias plip0 plip
alias plip1 plip
alias ppp-compress-18 ppp_mppe
alias ppp-compress-21 bsd_comp
alias ppp-compress-24 ppp_deflate
alias ppp-compress-26 ppp_deflate
alias net-pf-1 unix
alias net-pf-3 ax25
# alias net-pf-3 off
alias net-pf-4 ipx
# alias net-pf-4 off
alias net-pf-5 appletalk
# alias net-pf-5 off
alias net-pf-6 netrom
# alias net-pf-6 off
alias net-pf-10 ipv6
# alias net-pf-10 off
alias net-pf-11 rose
# alias net-pf-11 off
alias net-pf-17 af_packet
alias tap0 ethertap
alias tap1 ethertap
alias tap2 ethertap
alias tap3 ethertap
alias tap4 ethertap
alias tap5 ethertap
alias tap6 ethertap
alias tap7 ethertap
alias tap8 ethertap
alias tap9 ethertap
alias tap10 ethertap
alias tap11 ethertap
alias tap12 ethertap
alias tap13 ethertap
alias tap14 ethertap
alias tap15 ethertap
pre-install mga modprobe "-k" "agpgart"
pre-install r128 modprobe "-k" "agpgart"
options agpgart agp_try_unsupported=1
# don't try to reset isa-pnp cards on startup
options isa-pnp isapnp_reset=0
# end of common part for modules.conf
# begin of i386 part for modules.conf
alias char-major-4 serial
alias char-major-5 serial
alias parport_lowlevel parport_pc
# options parport_pc io=0x378 irq=none,none
# If you have multiple parallel ports, specify them this way:
# options parport_pc io=0x378,0x278 irq=none,none
# Linux ACP modem (Mwave)
alias char-major-10-219 mwavedd
# options mwavedd dspirq=10 dspio=0x130 uartirq=3 uartio=0x2f8
# IBM thinkpad tpctl
# see /usr/share/doc/packages/tpctl/
alias char-major-10-170 thinkpad
# options thinkpad enable_smapi=0
# end of i386 part for modules.conf
# Added by YaST2, do not change
alias usb-hostadapter usb-uhci
# lt_drivers: autoloading and insertion parameter usage
# options lt_modem vendor_id=0x115d device_id=0x0420 Forced=3,0x130,0x2f8
# section for lt_drivers ends
alias char-major-62 lt_serial
below ltmodem isa-pnp
---------------------------------------------------------------------------------------
Wie Du übrigens ganz am Ende siehst, habe ich ein Device lt_modem. Das ist
das eingebaute Modem (Lucent WinModem). Die Treiber dazu bekommst Du
bei www.heby.de/ltmodem. Allen anderen WinModem-Geschädigten sei die
Site 'www.linmodems.org' empfohlen, wo offensichtlich auch Treiber für andere
Hersteller bereitstehen (oder zumindestens Links dahin).
Gruß
Andreas
| < Previous | Next > |