Hi all, with 3.11rc4, an USB 3.0 expresscard is not working anymore in my ThinkPad X200s unless it is plugged at boot. I'm not 100% sure when it last worked, but in the logs I see that I used it with 3.10rc4. One difference between 3.11-suse and 3.10-suse is, that pciehp is now built in. In 3.10 I had to load it manually to get the card to work. So I'm wondering if there is just some parameter I need to set or if there is a way to trigger the "rescanning" of the port. I don't get any interrupts when inserting or ejecting the card: susi:~ # grep PCIe /proc/interrupts 40: 0 0 PCI-MSI-edge PCIe PME, pciehp 41: 0 0 PCI-MSI-edge PCIe PME, pciehp 42: 0 0 PCI-MSI-edge PCIe PME Any hints? Best regards, Stefan -- Stefan Seyfried "If your lighter runs out of fluid or flint and stops making fire, and you can't be bothered to figure out about lighter fluid or flint, that is not Zippo's fault." -- bkw -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org