Hi all, Investigation reveals that the UCB1400 is only used on ARM OMAP machines: linux $ git grep '"ucb1400_core"' arch/arm/mach-pxa/balloon3.c: .name = "ucb1400_core", arch/arm/mach-pxa/cm-x2xx.c: .name = "ucb1400_core", arch/arm/mach-pxa/colibri-pxa270.c: .name = "ucb1400_core", arch/arm/mach-pxa/palmtc.c: .name = "ucb1400_core", arch/arm/mach-pxa/vpac270.c: .name = "ucb1400_core", drivers/mfd/ucb1400_core.c: .name = "ucb1400_core", This means that CONFIG_TOUCHSCREEN_UCB1400=m, CONFIG_GPIO_UCB1400=y and CONFIG_UCB1400_CORE=m are useless in non-ARM configuration files, and as I understand it, they could also be removed from armv5tel/versatile and armv7hl/exynos. I'm going to do that if there are no objections in the next few days. Also, investigation revealed that the gpio-ucb1400 driver is dead code at the moment, and given that it can't be built as a module, I would like to remove it not only in the Factory kernel but also in the 12.2, 12.3 and stable kernels (non-arm, at least.) If you disagree, speak up now. -- Jean Delvare Suse L3 -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-kernel+owner@opensuse.org