May 2009 - openSUSE Kernel - openSUSE Mailing Lists

[opensuse-kernel] FATAL missing module dependencies @ kernel- upgrade
by PGNet Dev 29 May '09

29 May '09

hi, i'm not sure if these errors/warnings are 'real', or what they're cause by -- zypper, md &/or the actual kernel ... i've, lsb_release -r Release: 11.1 uname -ri 2.6.27.23-5-xen x86_64 rpm -qa | grep zypp libzypp-6.5.2-20.1 zypper-1.1.2-53.1 upgrading kernel from repo, http://download.opensuse.org/repositories/Kernel:/SL111_BRANCH/openSUSE_11.1 @ zypper dup i get a series of FATAL errors & WARNINGS that i've not seen before, ... Retrieving package kernel-xen-base-2.6.27.23-6.1.x86_64 (4/33), 7.2 MiB (14.5 MiB unpacked) Retrieving: kernel-xen-base-2.6.27.23-6.1.x86_64.rpm [done (262.4 KiB/s)] Installing: kernel-xen-base-2.6.27.23-6.1 [done] Additional rpm output: Setting up /lib/modules/2.6.27.23-6-xen Kernel image: /boot/vmlinuz-2.6.27.23-6-xen Initrd image: /boot/initrd-2.6.27.23-6-xen Root device: /dev/VG_Dom0/LV_ROOT (mounted on / as ext3) Resume device: /dev/VG_Swap/LV_SWAP FATAL: Module raid0 not found. WARNING: no dependencies for kernel module 'raid0' found. FATAL: Module raid1 not found. WARNING: no dependencies for kernel module 'raid1' found. FATAL: Module raid456 not found. WARNING: no dependencies for kernel module 'raid456' found. FATAL: Module sata_nv not found. WARNING: no dependencies for kernel module 'sata_nv' found. FATAL: Module pata_amd not found. WARNING: no dependencies for kernel module 'pata_amd' found. FATAL: Module ata_generic not found. WARNING: no dependencies for kernel module 'ata_generic' found. FATAL: Module amd74xx not found. WARNING: no dependencies for kernel module 'amd74xx' found. FATAL: Module ide_pci_generic not found. WARNING: no dependencies for kernel module 'ide_pci_generic' found. FATAL: Module dm_crypt not found. WARNING: no dependencies for kernel module 'dm-crypt' found. FATAL: Module dm_snapshot not found. WARNING: no dependencies for kernel module 'dm-snapshot' found. FATAL: Module xfs not found. WARNING: no dependencies for kernel module 'xfs' found. FATAL: Module aes not found. WARNING: no dependencies for kernel module 'aes' found. FATAL: Module sha1 not found. WARNING: no dependencies for kernel module 'sha1' found. FATAL: Module sha256 not found. WARNING: no dependencies for kernel module 'sha256' found. FATAL: Module sha512 not found. WARNING: no dependencies for kernel module 'sha512' found. FATAL: Module pegasus not found. WARNING: no dependencies for kernel module 'pegasus' found. FATAL: Module usbnet not found. WARNING: no dependencies for kernel module 'usbnet' found. FATAL: Module processor not found. WARNING: no dependencies for kernel module 'processor' found. FATAL: Module thermal not found. WARNING: no dependencies for kernel module 'thermal' found. FATAL: Module fan not found. WARNING: no dependencies for kernel module 'fan' found. FATAL: Module cpuid not found. WARNING: no dependencies for kernel module 'cpuid' found. FATAL: Module usbhid not found. WARNING: no dependencies for kernel module 'usbhid' found. FATAL: Module linear not found. WARNING: no dependencies for kernel module 'linear' found. Kernel Modules: jbd dm-mod mbcache ext3 edd xennet cdrom xenblk crc-t10dif scsi_mod sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd Features: dm block usb md lvm2 resume.userspace resume.kernel Bootsplash: No bootsplash for kernel flavor xen 25663 blocks 2009-05-14 09:30:07 WARNING: Tools::GetMultipath: multipath command failed with 256 2009-05-14 09:30:07 WARNING: Core::GetExtendedPartition: Specified device /dev/md0 is not valid and cannot be used as base for detecting an extended partition on the same disk. ... the upgrade completes and, afaict, the kernel's installed ok. checking mkinitrd i still see warnings, but only in the -xen case, Kernel image: /boot/vmlinuz-2.6.27.23-6-default Initrd image: /boot/initrd-2.6.27.23-6-default Root device: /dev/VG_Dom0/LV_ROOT (mounted on / as ext3) Resume device: /dev/VG_Swap/LV_SWAP Kernel Modules: raid0 raid1 xor async_tx async_memcpy async_xor raid456 jbd dock scsi_mod libata sata_nv pata_amd ata_generic ide-core amd74xx ide-pci-generic dm-mod crypto_blkcipher dm-crypt dm-snapshot mbcache ext3 xfs aes_generic aes-x86_64 sha1_generic sha256_generic sha512_generic mii usbcore pegasus usbnet hwmon thermal_sys processor thermal fan edd cpuid crc-t10dif sd_mod ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid linear Features: dm block usb md lvm2 resume.userspace resume.kernel Bootsplash: openSUSE (1280x1024) 30184 blocks Kernel image: /boot/vmlinuz-2.6.27.23-6-xen Initrd image: /boot/initrd-2.6.27.23-6-xen Root device: /dev/VG_Dom0/LV_ROOT (mounted on / as ext3) Resume device: /dev/VG_Swap/LV_SWAP Kernel Modules: raid0 raid1 xor async_tx async_memcpy async_xor raid456 jbd dock scsi_mod libata sata_nv pata_amd ata_generic ide-core amd74xx ide-pci-generic dm-mod crypto_blkcipher dm-crypt dm-snapshot mbcache ext3 xfs aes_generic aes-x86_64 sha1_generic sha256_generic sha512_generic mii usbcore pegasus usbnet hwmon thermal_sys processor thermal fan edd cpuid xennet cdrom xenblk crc-t10dif sd_mod ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid linear Features: dm block usb md lvm2 resume.userspace resume.kernel Bootsplash: No bootsplash for kernel flavor xen 30299 blocks 2009-05-14 09:41:39 WARNING: Tools::GetMultipath: multipath command failed with 256 2009-05-14 09:41:39 WARNING: Core::GetExtendedPartition: Specified device /dev/md0 is not valid and cannot be used as base for detecting an extended partition on the same disk. once the auto-generated menu.list reboot is fixed (perl-Bootloader issues ...), subsequent reboot is ok. what's causing these errors/warnings? are they 'real'? thanks. -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

4 4

[opensuse-kernel] KOTD and console with vga=0x31a
by Markus Koßmann 10 May '09

10 May '09

Since KOTD 20090406183001_398542cc booting with vga=0x31a results in black and usable textconsoles. on my system. KOTD 20090331140119_768f098d still works fine. Looking in boot.msg shows that vesafb doesn't load anymore. Any ideas what change may have broken vga=0x31a ? -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 1

[opensuse-kernel] Quickcam-kmp obsolete, but maybe still needed
by Bjørn Lie 10 May '09

10 May '09

The drivers that are provided from the quickcam-kmp-* package is now ported to v4l2 Quote mail from debian list http://groups.google.com/group/linux.debian.bugs.dist/browse_thread/thread/… linux-2.6.29 provides the gspca_stv06xx driver, a port to v4l2 of qc-usb which should support all the cameras supported by qc-usb. ---------- I've tested the driver with my cam, and it seems quite functional, however I see that some desktop apps does not yet function with the new in kernel driver. I.e ekiga + gstreamer. This is however bugs in those aps I guess, and should probably not be taken into account. + from what I read in the above link, qc-usb is not developed anymore, so I guess removing that package will ease the burden on you kernelmaintainers. Extra info: Vlc streams the cam fine + the gspca "webcam-test" program works fine. Should I put in a bug to have the package removed/obsoleted, or does anyone object to have the package removed? Bjørn Lie -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] aufs being dropped - union mount coming?
by teelynn19＠aim.com 08 May '09

08 May '09

Folks Now that opensuse is dropping aufs from factory (http://lists.opensuse.org/opensuse-commit/2009-05/msg00188.html), are opensuse developers going to assist in getting the 'union mount' patches working with new kernels? Thanks, Toni -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] some kernel issues
by Werner LEMBERG 05 May '09

05 May '09

[kernel 2.6.30-rc3-13-vanilla from factory on top of 11.1] As Greg has mentioned on another list, combining a recent factoryk ernel with 11.1 works just fine. However, there are some issues: . With my 945GM intel graphics card, I don't get TTYs which I could switch to with Ctrl-Alt-Shift-F1, for example. Only F7 to switch back to graphics mode works fine. In particular, I don't see any boot messages at start-up. This has worked fine with a previous kernel like 2.6.27.21. Are there new boot parameters to add or is this a bug? It seems that `vga=0x31a' fails (which yast provides) since without it I can see boot messages. BTW, for `vga=0x31a' I get Console: colour dummy device 80x25 in the log file, while without this parameter I get Console: colour VGA+ 80x25 . There's a typo in a boot message: could not finy any ACPI SRAT memory areas. ^ . What do these messages mean? Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods Something I should take care of? . Ditto for this message: Warning! ehci_hcd should always be loaded before \ uhci_hcd and ohci_hcd, not after . I see that the above RPM comes with a lot of firmware files. Interestingly, the file iwlwifi-3945-2.ucode is missing. Is this intentional? I assume that there are copyright and/or license issues... . After updating the microcode, iwl3945 works, but only a few minutes. Then I get wlan0: no probe response from AP 00:0f:b5:7b:1c:c6 - disassociating What's that? Why does iwl3945 now behaves differently compared to 2.6.27.21? Werner -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

7 18

[opensuse-kernel] Re: some kernel issues
by Werner LEMBERG 05 May '09

05 May '09

>> With my 945GM intel graphics card, I don't get TTYs which I could >> switch to with Ctrl-Alt-Shift-F1, for example, after X has started. >> Only F7 to switch back to graphics mode works fine. In particular, >> I don't see any boot messages at start-up. This has worked fine >> with a previous kernel like 2.6.27.21. > > Make sure you haven't enabled kernel mode setting. > > CONFIG_DRM_I915_KMS It's not set. BTW, CONFIG_DRM_I915 is set to `m'. Werner -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] Re: some kernel issues
by Werner LEMBERG 05 May '09

05 May '09

> [kernel 2.6.30-rc4-14-vanilla from openSuSE factory on top of > openSuSE 11.1] > > > With my 945GM intel graphics card, I don't get TTYs which I could > switch to with Ctrl-Alt-Shift-F1, for example, after X has started. > Only F7 to switch back to graphics mode works fine. In particular, > I don't see any boot messages at start-up. This has worked fine > with a previous kernel like 2.6.27.21. I've filed a bug report. http://bugzilla.kernel.org/show_bug.cgi?id=13249 Werner -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

1 0

[opensuse-kernel] ALSA problems with 2.6.30-rc3-13-vanilla
by Werner LEMBERG 04 May '09

04 May '09

There is a big difference w.r.t. to volume whether I use mplayer to play, say, a flash audio file or a Adobe's flash player within Firefox. The latter's volume is far too small. Additionally, the flash player, even if not active (but open in a Firefox tab), blocks ALSA somehow: wl@linux-nvf0:~> mplayer xxx.flash MPlayer dev-SVN-r29116-4.3-openSUSE Linux 11.1 (i686)-Packman [...] Playing xxx.flash. libavformat file format detected. [lavf] Video stream found, -vid 0 [lavf] Audio stream found, -aid 1 VIDEO: [H264] 320x240 0bpp 36.917 fps 28.3 kbps ( 3.5 kbyte/s) ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [faad] AAC (MPEG2/4 Advanced Audio Coding) FAAD: compressed input bitrate missing, assuming 128kbit/s! AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400) Selected audio codec: [faad] afm: faad (FAAD AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: Device or resource busy [AO_ALSA] alsa-lib: pcm_hw.c:1321:(snd_pcm_hw_open) \ open /dev/snd/pcmC0D0p failed: Device or resource busy [AO_ALSA] alsa-lib: pcm_dmix.c:1008:(snd_pcm_dmix_open) unable to open slave [AO_ALSA] Playback open error: Device or resource busy [AO ESD] latency: [server: 0.37s, net: 0.00s] (adjust 0.37s) AO: [esd] 44100Hz 2ch s16le (2 bytes per sample) Is this a known problem? BTW, the same problem exists in kernel 2.6.27.21 too. My exact audio configuration can be found here: http://www.alsa-project.org/db/?f=83af62fe275ef0f5fa1663c78f10663d4e80c078 Werner -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 5

[opensuse-kernel] novfs kernel module
by Dominique Leuenberger 04 May '09

04 May '09

Hi, I'm kind off relying in the company to access our Novell infrastructure (NW6.5, some very few OES2, more to come). Since the 2.6.29 kernels (might have been .28.. not to sure.) the novfs kernel module is no longer shipped and the one shipped with the novell client (yaiks) does not compile properly anymore. Is there any chance to get this piece working again? (For the time being I 'work around' using ncpmount, but it has it's limitations and the client is just some more 'comfort' on top of it all (ncpmount/ncpfs does not allow for accessing files > 4GB for example). Thanks for your valuable support! just for reference, the build of novfs.ko fails with: kernel-source-2.6.29-6.4 Building novfs.ko for 2.6.29-6-debug make: Entering directory `/usr/src/linux-2.6.29-6-obj/x86_64/debug' make -C ../../../linux-2.6.29-6 O=/usr/src/linux-2.6.29-6-obj/x86_64/debug/. modules WARNING: Symbol version dump /usr/src/linux-2.6.29-6-obj/x86_64/debug/Module.symvers is missing; modules will have no dependencies and modversions. CC [M] /opt/novell/ncl/src/novfs/proc.o CC [M] /opt/novell/ncl/src/novfs/daemon.o /opt/novell/ncl/src/novfs/daemon.c: In function ‘Daemon_Dumpque’: /opt/novell/ncl/src/novfs/daemon.c:2392: error: request for member ‘counter’ in something not a structure or union /opt/novell/ncl/src/novfs/daemon.c: In function ‘local_unlink’: /opt/novell/ncl/src/novfs/daemon.c:2784: error: too many arguments to function ‘vfs_unlink’ make[3]: *** [/opt/novell/ncl/src/novfs/daemon.o] Error 1 make[2]: *** [_module_/opt/novell/ncl/src/novfs] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 make: Leaving directory `/usr/src/linux-2.6.29-6-obj/x86_64/debug' Error: Build Failed. Best regards, Dominique (in the endless hope that maybe, one day, the NCL might be available in a repository :) ) -- To unsubscribe, e-mail: opensuse-kernel+unsubscribe(a)opensuse.org For additional commands, e-mail: opensuse-kernel+help(a)opensuse.org

2 4