Mailinglist Archive: opensuse-kernel (36 mails)
| < Previous | Next > |
Re: [opensuse-kernel] kernel-source-2.6.27-rc9.HEAD_20081009181916.x86_64.rpm
- From: Markus Koßmann <mkossmann_ml1@xxxxxx>
- Date: Sun, 12 Oct 2008 21:51:27 +0200
- Message-id: <200810122151.27886.mkossmann_ml1@xxxxxx>
Am Sonntag, 12. Oktober 2008 schrieb Greg KH:
No, no binary rpms installed at all , only
kernel-source-2.6.27-HEAD_20081010035644.x86_64.rpm, then copied
linux-2.6.27-HEAD_20081010035644-obj/x86_64/default/.config to .config and
build the kernel with "make oldconfig && make -j4 && make modules_install &&
make install" using gcc-Version 4.3.1 20080507 (prerelease) [gcc-4_3-branch
revision 135036] (SUSE Linux). This is the same procedure, I'am using for all
KOTDs. and which was sucessful for 2.6.27-rc9.HEAD_20081009181916.
It fails allready in very early stage ( not more then about ten lines of
messages without any messages concerning block devices) with "cannot
execute /init".
So I think, the kernel cannot setup the initrd, but the file
initrd-2.6.27-HEAD_20081010035644-default and the right entries
in /boot/grub/menu.lst exist and I would expect another error message , if
grub wasn't able to load that file into memory.
The first thing, I did after the failure,was to rebuild the initrd. The
messages of mkinitrd look fine, but that didn't change anything, it still
fails with the same problem :
Kernel image: /boot/vmlinuz-2.6.25.16-0.1-default
Initrd image: /boot/initrd-2.6.25.16-0.1-default
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd sd_mod usbcore ohci-hcd uhci-h
cd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
22777 blocks
Kernel image: /boot/vmlinuz-2.6.27-HEAD_20081010035644-default
Initrd image: /boot/initrd-2.6.27-HEAD_20081010035644-default
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: hwmon thermal_sys processor thermal dock scsi_mod
libata sata_sil24 sata_nv pata_amd fan reiserfs edd crc-t10dif s
d_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23350 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc8-HEAD_20081003182016-defa
ult
Initrd image: /boot/initrd-2.6.27-rc8-HEAD_20081003182016-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd crc-t10dif sd_mod usbcore ohci
-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23210 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc8-HEAD_20081005114808-defa
ult
Initrd image: /boot/initrd-2.6.27-rc8-HEAD_20081005114808-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd crc-t10dif sd_mod usbcore ohci
-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23210 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc9-HEAD_20081009181916-defa
ult
Initrd image: /boot/initrd-2.6.27-rc9-HEAD_20081009181916-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: hwmon thermal_sys processor thermal dock scsi_mod
libata sata_sil24 sata_nv pata_amd fan reiserfs edd crc-t10dif s
d_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23351 blocks
Looking into the contents of the initrd shows that there are the same files
except the kernel modules for 2.6.27-HEAD_20081010035644 and
2.6.27-rc9-HEAD_20081009181916. So I don't think that it is a broken
initrd.
--
To unsubscribe, e-mail: opensuse-kernel+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-kernel+help@xxxxxxxxxxxx
On Sun, Oct 12, 2008 at 06:21:16PM +0200, Markus Koßmann wrote:
Am Samstag, 11. Oktober 2008 schrieb Greg KH:
On Sat, Oct 11, 2008 at 07:45:04PM +0200, Markus Koßmann wrote:
What happened to
http://ftp.suse.com/pub/projects/kernel/kotd/HEAD/x86_64/kernel-sourc
e-2. 6.27-rc9.HEAD_20081009181916.x86_64.rpm ? There is only
kernel-source-2.6.27-rc9.HEAD_20081009181916.src.rpm.
kernel-source-2.6.27-rc9.HEAD_20081009181916.i586.rpm is now found in
.../HEAD/i386 , in .../HEAD/i586 is only the .src.rpm, all other
arches have both the .src.rpm and the <arch>.rpm like before.
The build service is currently having "issues" (i.e. no power) combined
with a problem of getting working kernels the past few days due to a
lot of changes we made to the packages, contributed to a loss of the
KOTD packages.
Give us a few days to get it all working again.
2.6.27-rc9.HEAD_20081009181916 with kernel-source-....x86_64.rpm
generated from .src.rpm works fine for me.
With 2.6.27-HEAD_20081010035644 the issue with the missing x86_64.rpm
seems to be fixed.
But 2.6.27-HEAD_20081010035644-default fails now in early boot stage with
a kernel-panic: "cannot execute /init". Is this what you meant with " a
problem of getting working kernels" ?
No, we were having problems getting kernels built :)
That's not a good error to have, is the initrd found properly? Your
block devices? We're going to need more information. Do you have both
the -base and -default packages installed?
No, no binary rpms installed at all , only
kernel-source-2.6.27-HEAD_20081010035644.x86_64.rpm, then copied
linux-2.6.27-HEAD_20081010035644-obj/x86_64/default/.config to .config and
build the kernel with "make oldconfig && make -j4 && make modules_install &&
make install" using gcc-Version 4.3.1 20080507 (prerelease) [gcc-4_3-branch
revision 135036] (SUSE Linux). This is the same procedure, I'am using for all
KOTDs. and which was sucessful for 2.6.27-rc9.HEAD_20081009181916.
It fails allready in very early stage ( not more then about ten lines of
messages without any messages concerning block devices) with "cannot
execute /init".
So I think, the kernel cannot setup the initrd, but the file
initrd-2.6.27-HEAD_20081010035644-default and the right entries
in /boot/grub/menu.lst exist and I would expect another error message , if
grub wasn't able to load that file into memory.
The first thing, I did after the failure,was to rebuild the initrd. The
messages of mkinitrd look fine, but that didn't change anything, it still
fails with the same problem :
Kernel image: /boot/vmlinuz-2.6.25.16-0.1-default
Initrd image: /boot/initrd-2.6.25.16-0.1-default
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd sd_mod usbcore ohci-hcd uhci-h
cd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
22777 blocks
Kernel image: /boot/vmlinuz-2.6.27-HEAD_20081010035644-default
Initrd image: /boot/initrd-2.6.27-HEAD_20081010035644-default
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: hwmon thermal_sys processor thermal dock scsi_mod
libata sata_sil24 sata_nv pata_amd fan reiserfs edd crc-t10dif s
d_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23350 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc8-HEAD_20081003182016-defa
ult
Initrd image: /boot/initrd-2.6.27-rc8-HEAD_20081003182016-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd crc-t10dif sd_mod usbcore ohci
-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23210 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc8-HEAD_20081005114808-defa
ult
Initrd image: /boot/initrd-2.6.27-rc8-HEAD_20081005114808-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: processor thermal dock scsi_mod libata sata_sil24
sata_nv pata_amd fan reiserfs edd crc-t10dif sd_mod usbcore ohci
-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23210 blocks
Kernel image: /boot/vmlinuz-2.6.27-rc9-HEAD_20081009181916-defa
ult
Initrd image: /boot/initrd-2.6.27-rc9-HEAD_20081009181916-defau
lt
cp: Aufruf von stat für „/usr/lib64/libdirect-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libdirectfb-1.1.so.0“ nicht m
öglich: Datei oder Verzeichnis nicht gefunden
cp: Aufruf von stat für „/usr/lib64/libfusion-1.1.so.0“ nicht mög
lich: Datei oder Verzeichnis nicht gefunden
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_SP2504CS09QJ10Y
B21574-part5 (/dev/sdc5) (mounted on / as reiserfs)
Resume device: /dev/sdb1
Kernel Modules: hwmon thermal_sys processor thermal dock scsi_mod
libata sata_sil24 sata_nv pata_amd fan reiserfs edd crc-t10dif s
d_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: No bootsplash for kernel flavor default
23351 blocks
Looking into the contents of the initrd shows that there are the same files
except the kernel modules for 2.6.27-HEAD_20081010035644 and
2.6.27-rc9-HEAD_20081009181916. So I don't think that it is a broken
initrd.
--
To unsubscribe, e-mail: opensuse-kernel+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-kernel+help@xxxxxxxxxxxx
| < Previous | Next > |