October 2017 - openSUSE KDE - openSUSE Mailing Lists

[opensuse-kde] KF5 Frameworks Update (5.39/5.11.2) breaks QtQuickControls2.Slider
by Noee 28 Oct '17

28 Oct '17

Just updated TW with the KF5 factory repos. All of my QML apps/plasmoids that use Slider controls are now failing to load, citing a component version conflict. > > I have the Qt5 repo enable too, but there were not updates from that one. > > In QtCreator, code completion works fine and if I comment out at the > properties for the Slider, the apps/plasmoids load. The failure is at > runtime. > > [code] > . > . > QtQuick.Controls 2.2 > . > . > > Slider { > live: false > onMoved: mcws.setVolume(value/100, lv.currentIndex) > > } > > [/code] > > I should also note that on another machine with just the standard TW repos, the apps/plasmoids continue to work fine (Qt5.9.2/KF5.38) PS. Sorry for the double-send, I just realized I am subscribed with a different email. -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 10

[opensuse-kde] Plasma 5.8.8 for Leap 42.3?
by stakanov 28 Oct '17

28 Oct '17

Is the update for KDE to 5.8.8 planned for 42.3 (understood: via the standard update repos)? -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 1

[opensuse-kde] KDE KF5 5.39
by Martin Koller 27 Oct '17

27 Oct '17

Hi, according to https://build.opensuse.org/project/monitor/KDE:Frameworks5 the build for openSuse Leap 42.2 is all green, but it seems the 5.39 packages are still not released. Is there any other problem ? -- Best regards/Schöne Grüße Martin A: Because it breaks the logical sequence of discussion Q: Why is top posting bad? () ascii ribbon campaign - against html e-mail /\ - against proprietary attachments Geschenkideen, Accessoires, Seifen, Kulinarisches: www.lillehus.at -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 1

[opensuse-kde] A question about package kit
by stakanov 21 Oct '17

21 Oct '17

In one of my systems I have a "mystery". I need a few tips to solve it, because I am a bit puzzled. In the system (a gygabyte 970A chipset with integrated NIC I have this NIC and a secondary PCI-E NIC. Now I attributed fixed IP addresses and for each card a different default address under network manager. eth0 is the integrated NIC in the 192 range and the PCI-E is a internal network within the 178 range. All is good, both work, where the PCI- E is only internal without internet access. Now, when I call for a browser, the internet works problem free. Also updating with zypper or yast no hassle. But when it comes to package kit it shows persistently: Network is offline. I do not really understand this, unless(!) , package kit does erroneously take eth0 for the PCI-E card that should be eth1. Where can I look up what package kit considers as default card for calls on the internet? As everything else works, that must be something that has to do with a separate configuration file. Can somebody help me to solve the mystery? Thanks in advance. -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

1 1

[opensuse-kde] Empty ToolTip dialog boxes in GTK applications
by Mark Hounschell 20 Oct '17

20 Oct '17

People over on the regular opensuse-en list suggested I come here for an issue I seem to be having. I am running Leap 42.3 and using KDE. In several, but not all GTK applications, when I hover the mouse over an icon, all I get is an empty box. When I use Gnome I don't have the problem. On my SuSE 13.2 system I don't have the problem. It all started when I started using the eclipse IDE. I reported the problem on their forum. They asked for a desktop recording so they could see what I was doing. So I attempted to use xvidcap to provide it. But then I noticed that xvidcap did the same thing. So I went over to the opensuse list for assistance. I tried several of these in addition to eclipse and xvidcap: geeqie - emtpy tooltip dialog boxes gparted - empty tooltip dialog boxes inkscape - empty tooltip dialog boxes midori - empty tooltip dialog boxes gnumeric - tooltip dialog boxes work evince - tooltip dialog boxes work gedit - tooltip dialog boxes work abiword - tooltip dialog boxes work meld - tooltip dialog boxes work geany - tooltip dialog boxes work gthumb - tooltip dialog boxes work shotwell - tooltip dialog boxes work gnote - tooltip dialog boxes work gimp - tooltip dialog boxes work On all the above pgms that work, the box has a black bg with white text. All the ones that are blank appear to be a white bg with no or white text. I thought I found where to configure that so I changed the setting to a white bg with black colors expecting the applications that work to "change". But no my change had no affect. The original thread over on opensuse-en is at: https://lists.opensuse.org/opensuse/2017-10/msg00242.html I have more than 1 Leap 42.3 system and the same thing happens on all of them. My 13.2 system does not have the issue. Any help with this problem would be appreciated. Regards Mark -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 2

[opensuse-kde] Wayland Testing on Tumbleweed
by Mike Noe 15 Oct '17

15 Oct '17

I've been reading the plasma-devel list, specifically the comments on 5.12 and Wayland. I'd like help test Wayland/Plasma5 using Tumbleweed, especially the multi-monitor support, as this is the one biggee that is holding me back. Is there a formal testing "area'? It seems the KDE "unstable" repos are somewhat active. Would these be the repos to use for latest Wayland/Plasma5 git? I see that Neon is an option as well, but it would be nice to stick with TW. For example, right now, I'm using Frameworks5/Extras/Applications repos as "daily drivers". If I try the Wayland session, there two major stoppers: 1. Logout crashes/hangs (seems to be a known issue) 2. Multi-mon is simply not supported. Turning on/plugging in a second monitor immediately crashes the desktop and some apps. It appears this is known as well, to some degree. KScreen gui, kscreen-console and kscreen-doctor do not allow the setting up the monitors. So, where to report this stuff on bugzilla? Opensuse or upstream directly. Thx, Mike -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

3 2

[opensuse-kde] Kdenlive on TW no multicore support ?
by Daniele 06 Oct '17

06 Oct '17

Hi guys, I've Leap 42,2 installed on an old dual core (Intel e8400) and TW installed on a quad core (Athlon 860k). On leap, while rendering, 2 core at full load. On tw only one core is used ! Oh yes, 4 core is set in rendering options and 4 threads in kdenlive config. I've found some old forum post about this issue but at this point, I still don't uderstand if and how multicore rendering is working or not :( Now the rendering time is almost the same in both systems :( Any hints ? Thanks, Daniele. -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

1 0

[opensuse-kde] What do I need to install to play video , all I see is static.# https://www.youtube.com/watch?v=-tV0Ajoq4iw [Muppet Show: Act Naturally]
by doiggl＠velocitynet.com.au 04 Oct '17

04 Oct '17

Hello, What do I need to install to play video , all I see is static. see attached.Links below. using kde rpms. Thanks --Glenn :error static https://www.youtube.com/watch?v=-tV0Ajoq4iw Muppet Show: Act Naturally # This one plays ok: Muppets "Act Naturally" # Installed rpms: # rpm -qa |grep -i play |sort media-player-info-21-2.2.1.noarch Installed rpms: --------------- # rpm -qa |grep -i play |sort media-player-info-21-2.2.1.noarch # rpm -qa |grep -i kde |sort NetworkManager-kde4-libs-0.9.0.9-1.2.x86_64 NetworkManager-openvpn-kde4-0.9.0.9-1.2.x86_64 NetworkManager-pptp-kde4-0.9.0.9-1.2.x86_64 NetworkManager-vpnc-kde4-0.9.0.9-1.2.x86_64 bundle-lang-kde-en-12.3-9.6.noarch kde4-filesystem-4.11-3.3.1.x86_64 kde4-kgreeter-plugins-4.10.97-1.2.x86_64 kde4-print-manager-4.10.97-1.2.x86_64 kdeartwork4-screensaver-4.10.97-1.2.x86_64 kdebase4-libkonq-4.10.97-1.2.x86_64 kdebase4-nsplugin-4.10.97-1.2.x86_64 kdebase4-openSUSE-13.1-3.15.x86_64 kdebase4-runtime-4.11.2-1.1.x86_64 kdebase4-runtime-branding-openSUSE-13.1-3.15.x86_64 kdebase4-session-4.11-1.1.noarch kdebase4-workspace-4.10.97-1.2.x86_64 kdebase4-workspace-branding-openSUSE-13.1-3.15.x86_64 kdebase4-workspace-ksysguardd-4.10.97-1.2.x86_64 kdebase4-workspace-liboxygenstyle-4.10.97-1.2.x86_64 kdebase4-workspace-plasma-calendar-4.10.97-1.2.x86_64 kdegames4-carddecks-default-4.10.97-1.2.noarch kdelibs4-4.11.2-3.1.x86_64 kdelibs4-branding-openSUSE-13.1-4.5.noarch kdelibs4-core-4.11.2-3.1.x86_64 kdenetwork4-filesharing-4.10.97-1.2.x86_64 kdepasswd-4.10.97-1.2.x86_64 kdepim4-4.10.97-1.2.x86_64 kdepim4-runtime-4.10.97-1.2.x86_64 kdepimlibs4-4.10.97-1.2.x86_64 libkde4-4.11.2-3.1.x86_64 libkdecore4-4.11.2-3.1.x86_64 libkdegames-4.10.97-1.2.x86_64 libkdegames6-4.10.97-1.2.x86_64 libkdepim4-4.10.97-1.2.x86_64 libkdepimlibs4-4.10.97-1.2.x86_64 liblockdev1-1.0.3_git201003141408-24.4.x86_64 libproxy1-config-kde4-0.4.11-5.2.x86_64 libreoffice-kde4-4.1.0.4-2.2.x86_64 lockdev-1.0.3_git201003141408-24.4.x86_64 mozilla-kde4-integration-0.6.4-3.5.x86_64 openSUSE-release-livecd-kde-13.1-1.17.x86_64 patterns-openSUSE-kde4-13.1-10.1.x86_64 patterns-openSUSE-kde4_basis-13.1-10.1.x86_64 patterns-openSUSE-kde4_games-13.1-10.1.x86_64 patterns-openSUSE-kde4_imaging-13.1-10.1.x86_64 patterns-openSUSE-kde4_internet-13.1-10.1.x86_64 patterns-openSUSE-kde4_multimedia-13.1-10.1.x86_64 patterns-openSUSE-kde4_office-13.1-10.1.x86_64 patterns-openSUSE-kde4_pure-13.1-10.1.x86_64 patterns-openSUSE-kde4_utilities-13.1-10.1.x86_64 patterns-openSUSE-kde4_yast-13.1-13.6.1.x86_64 patterns-openSUSE-sw_management_kde4-13.1-10.1.x86_64 polkit-kde-agent-1-0.99.0-18.2.x86_64

4 5

[opensuse-kde] How can I tell a plasma 5 application like Kaffeine to shutdown my system after a certain event?
by stakanov 03 Oct '17

03 Oct '17

Is it possible to tell e.g. Kaffeine to shut down my system when a task is done? My problem is that I do sometimes register movies late night (3am) and I would like to shut down the system once the last planned programming is done. However; I do not really find a menu point to do this. Maybe it is possible via a script? In terminal that would be probably done via a "pipe" if I am not wrong. How would I do it in Plasma5? -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 1

[opensuse-kde] Latest stable KDE applications on Leap
by Cornelius Schumacher 03 Oct '17

03 Oct '17

What is the recommended way of getting the latest stable KDE applications release on Leap 42.3? The Wiki page at https://en.opensuse.org/SDB:KDE_repositories is a bit confusing there as it only lists the extra repo in the section about getting updated applications. -- Cornelius Schumacher <cschum(a)suse.de> -- To unsubscribe, e-mail: opensuse-kde+unsubscribe(a)opensuse.org To contact the owner, e-mail: opensuse-kde+owner(a)opensuse.org

2 1