Mailinglist Archive: opensuse-kde (106 mails)
| < Previous | Next > |
Re: [opensuse-kde] KDE4 does not boot anymore :-(
- From: "M9." <monkey9@xxxxxx>
- Date: Wed, 24 Oct 2007 20:12:23 +0200
- Message-id: <471F8B07.1030005@xxxxxx>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Ben Kevan schreef:
This doesn't do any good i think, its about the FW, which i shutted down
because there is no normal way to enter my network:
monkey9@tribal-sfn2:~> sudo cat /var/log/YaST/y2log | tail -20
Wachtwoord:
cat: /var/log/YaST/y2log: Bestand of map bestaat niet
monkey9@tribal-sfn2:~> sudo cat /var/log/YaST2/y2log | tail -20
Wachtwoord:
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2476
Firewall configuration has been changed. Writing:
$["FW_ALLOW_FW_BROADCAST_DMZ":"no", "FW_ALLOW_FW_BROADCAST_EXT":"no",
"FW_ALLOW_FW_BROADCAST_INT":"no", "FW_CONFIGURATIONS_DMZ":"",
"FW_CONFIGURATIONS_EXT":"", "FW_CONFIGURATIONS_INT":"", "FW_DEV_DMZ":"",
"FW_DEV_EXT":"any", "FW_DEV_INT":"eth0",
"FW_FORWARD_ALWAYS_INOUT_DEV":"", "FW_FORWARD_MASQ":"",
"FW_IGNORE_FW_BROADCAST_DMZ":"no", "FW_IGNORE_FW_BROADCAST_EXT":"yes",
"FW_IGNORE_FW_BROADCAST_INT":"no", "FW_IPSEC_TRUST":"no",
"FW_LOAD_MODULES":"", "FW_LOG_ACCEPT_ALL":"no",
"FW_LOG_ACCEPT_CRIT":"yes", "FW_LOG_DROP_ALL":"no",
"FW_LOG_DROP_CRIT":"yes", "FW_MASQUERADE":"no",
"FW_PROTECT_FROM_INT":"no", "FW_ROUTE":"no",
"FW_SERVICES_ACCEPT_DMZ":"", "FW_SERVICES_ACCEPT_EXT":"",
"FW_SERVICES_ACCEPT_INT":"", "FW_SERVICES_DMZ_IP":"",
"FW_SERVICES_DMZ_RPC":"", "FW_SERVICES_DMZ_TCP":"",
"FW_SERVICES_DMZ_UDP":"", "FW_SERVICES_EXT_IP":"",
"FW_SERVICES_EXT_RPC":"", "FW_SERVICES_EXT_TCP":"",
"FW_SERVICES_EXT_UDP":"", "FW_SERVICES_INT_IP":"",
"FW_SERVICES_INT_RPC":"", "FW_SERVICES_INT_TCP":"",
"FW_SERVICES_INT_UDP":"", "enable_firewall":false, "start_firewall":false].
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2499
Disabling firewall services
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] Service.ycp:399
Disabling service SuSEfirewall2_setup
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] Service.ycp:399
Disabling service SuSEfirewall2_init
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:1338
Firewall services are stopped
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2428
Firewall has been stopped already
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] clients/firewall.ycp:42
Firewall module finished
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] clients/firewall.ycp:43
- ----------------------------------------
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [wfm]
WFMSubAgent.cc(~WFMSubAgent):41 Deleting SubAgent: 0 scr
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [liby2]
Y2ProgramComponent.cc(result):159 Sending result: `result (nil)
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [liby2]
genericfrontend.cc(main):571 Finished YaST2 component 'y2base'
monkey9@tribal-sfn2:~>
I am scared of updating x-server, i had to re-install several times
after a broken x-org update....
I had an update for 10.3: 4595-0, and did not reboot yet so, i dunno
what is gonna happen after rebooting.. ;-/
tribal-sfn2:/home/monkey9 # zypper update -t package -r "openSUSE_10.3.KDE4"
* Cache van bron 'openSUSE_10.3.KDE4' lezen
* Geïnstalleerde pakketten worden gelezen [100%]
De volgende pakketten zullen worden opgewaardeerd:
kdegames4-carddecks-default oxygen-icon-theme-scalable oxygen-icon-theme
kdegames4-carddecks-other clucene-core extragear-libs libkdegames4 libexiv2
extragear-plasma extragear-utils extragear-sdk libkdecore4 strigi
extragear-base
kdegames4 kdelibs4-core extragear-pim
Totale downloadgrootte: 60,3 M Na de operatie zal 2,7 M worden vrijgemaakt.
Doorgaan? [ja/nee]: j
pakket kdegames4-carddecks-default-3.94.1-4.1.noarch wordt gedownload,
1,6 M (1,7 M uitgepakt)
Downloadt: kdegames4-carddecks-default-3.94.1-4.1.noarch.rpm
* Downloading [100%]
* Installeert kdegames4-carddecks-default-3.94.1-4.1 [100%]
pakket oxygen-icon-theme-3.94.1-7.2.noarch wordt gedownload, 9,8 M (44,7
M uitgepakt)
Downloadt: oxygen-icon-theme-3.94.1-7.2.noarch.rpm
* Downloading [100%]
* Installeert oxygen-icon-theme-3.94.1-7.2 [100%]
pakket clucene-core-0.9.20-1.1.x86_64 wordt gedownload, 363,3 K (1,2 M
uitgepakt)
Downloadt: clucene-core-0.9.20-1.1.x86_64.rpm
* Downloading [100%]
* Installeert clucene-core-0.9.20-1.1 [100%]
pakket libexiv2-0.15-10.1.x86_64 wordt gedownload, 531,6 K (1,7 M uitgepakt)
Downloadt: libexiv2-0.15-10.1.x86_64.rpm
* Downloading [100%]
* Installeert libexiv2-0.15-10.1 [100%]
pakket libkdecore4-3.94.1-4.2.x86_64 wordt gedownload, 716,5 K (2,0 M
uitgepakt)
Downloadt: libkdecore4-3.94.1-4.2.x86_64.rpm
* Downloading [100%]
* Installeert libkdecore4-3.94.1-4.2 [100%]
pakket oxygen-icon-theme-scalable-3.94.1-7.2.noarch wordt gedownload,
32,2 M (36,1 M uitgepakt)
Downloadt: oxygen-icon-theme-scalable-3.94.1-7.2.noarch.rpm
* Downloading [100%]
* Installeert oxygen-icon-theme-scalable-3.94.1-7.2 [100%]
pakket kdegames4-carddecks-other-3.94.1-4.1.noarch wordt gedownload, 8,2
M (13,8 M uitgepakt)
Downloadt: kdegames4-carddecks-other-3.94.1-4.1.noarch.rpm
* Downloading [100%]
* Installeert kdegames4-carddecks-other-3.94.1-4.1 [100%]
pakket strigi-0.5.6-3.1.x86_64 wordt gedownload, 1,0 M (4,8 M uitgepakt)
Downloadt: strigi-0.5.6-3.1.x86_64.rpm
* Downloading [100%]
* Installeert strigi-0.5.6-3.1 [100%]
pakket kdelibs4-core-3.94.1-4.2.x86_64 wordt gedownload, 119,4 K (437,5
K uitgepakt)
Downloadt: kdelibs4-core-3.94.1-4.2.x86_64.rpm
* Downloading [100%]
* Installeert kdelibs4-core-3.94.1-4.2 [100%]
pakket extragear-libs-3.94.0.svn725487-1.9.x86_64 wordt gedownload,
572,2 K (14,9 M uitgepakt)
Downloadt: extragear-libs-3.94.0.svn725487-1.9.x86_64.rpm
* Downloading [100%]
* Installeert extragear-libs-3.94.0.svn725487-1.9 [100%]
pakket libkdegames4-3.94.1-3.1.x86_64 wordt gedownload, 393,8 K (1,2 M
uitgepakt)
Downloadt: libkdegames4-3.94.1-3.1.x86_64.rpm
* Downloading [100%]
* Installeert libkdegames4-3.94.1-3.1 [100%]
pakket extragear-plasma-3.94.0-2.9.x86_64 wordt gedownload, 3,6 M (14,1
M uitgepakt)
Downloadt: extragear-plasma-3.94.0-2.9.x86_64.rpm
* Downloading [100%]
* Installeert extragear-plasma-3.94.0-2.9 [100%]
pakket extragear-utils-3.94.0.svn724088-4.2.x86_64 wordt gedownload,
295,4 K (7,0 M uitgepakt)
Downloadt: extragear-utils-3.94.0.svn724088-4.2.x86_64.rpm
* Downloading [100%]
* Installeert extragear-utils-3.94.0.svn724088-4.2 [100%]
pakket extragear-sdk-3.94.0.svn725631-2.5.x86_64 wordt gedownload, 283,3
K (12,8 M uitgepakt)
Downloadt: extragear-sdk-3.94.0.svn725631-2.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-sdk-3.94.0.svn725631-2.5 [100%]
pakket extragear-base-3.94.0.svn725482-2.5.x86_64 wordt gedownload,
546,8 K (17,7 M uitgepakt)
Downloadt: extragear-base-3.94.0.svn725482-2.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-base-3.94.0.svn725482-2.5 [100%]
pakket extragear-pim-3.94.0.svn726610-1.5.x86_64 wordt gedownload, 61,9
K (1,8 M uitgepakt)
Downloadt: extragear-pim-3.94.0.svn726610-1.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-pim-3.94.0.svn726610-1.5 [100%]
pakket kdegames4-3.94.1-3.1.x86_64 wordt gedownload, 23,6 K (66,6 K
uitgepakt)
Downloadt: kdegames4-3.94.1-3.1.x86_64.rpm
* Downloading [100%]
* Installeert kdegames4-3.94.1-3.1 [100%]
tribal-sfn2:/home/monkey9 #
Lets hope the last x-server update did not break the install again.. ;-)
- --
Have a nice day,
M9. Now, is the only time that exists.
OS: Linux 2.6.22.5-31-default x86_64
Huidige gebruiker: monkey9@tribal-sfn2
Systeem: openSUSE 10.3 (x86_64)
KDE: 3.5.8 "release 21.2"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.4-svn0 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFHH4sHX5/X5X6LpDgRAnUzAKC2TL5JDw4HSo8f+Kt8vKfcR0nOlwCgu4BL
092FE8gW79a+IG9JEiVDyk8=
=L+I4
-----END PGP SIGNATURE-----
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-kde+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-kde+help@xxxxxxxxxxxx
Hash: SHA1
Ben Kevan schreef:
On Wednesday 24 October 2007 12:31:06 am you wrote:
Ben Kevan schreef:
On Monday 22 October 2007 11:33:30 am M9. wrote:Well, i followed the KDE4 since 10.3 beta2, and sent also some
Hi,Any type of symptoms? Can you get into run level 3? What happens when you
After a new install 10.3GM, kde4 does not boot anymore..
Is this known?
Is there a workaround?
tia M9.
try to get to run level 5? What video card? Are you sure it isn't that
you had Nvidia / Ati driver loaded before the Kernel was updated?
If your using a Beta version of KDE, you should def be able to give us
more precise issues you are having with booting..
Ben
screenshots to this list...
But since a x-server update, i had to reinstall to the original GM.
But now i just get to the green bootscreen, and in the upper left corner
is a little message with an okay button, which brings me back to the
loginscreen.
(i choose KDE4 previeuw from the loginscreen..)
I installed all the newest pkgs, but nothing changed, that's why i asked.
I did or do not use proprietary ati drivers, because the drivers coming
with suse work allright, except for compiz and beryl, which turn off the
3D support when trying to use them....
i will post the message from x here.. (there was no way of copying, so i
have to write it down..)
(The desktop did and does not load, that is all i can say at the moment..)
Was the updates the last thing to do? If so, please give output of:
sudo cat /var/log/YaST/y2log | tail -20
This doesn't do any good i think, its about the FW, which i shutted down
because there is no normal way to enter my network:
monkey9@tribal-sfn2:~> sudo cat /var/log/YaST/y2log | tail -20
Wachtwoord:
cat: /var/log/YaST/y2log: Bestand of map bestaat niet
monkey9@tribal-sfn2:~> sudo cat /var/log/YaST2/y2log | tail -20
Wachtwoord:
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( dialup ) = []
2007-10-24 17:25:25 <1> tribal-sfn2(9241) [YCP] NetworkDevices.ycp:1292
List( ) = ["eth0", "lo"]
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2476
Firewall configuration has been changed. Writing:
$["FW_ALLOW_FW_BROADCAST_DMZ":"no", "FW_ALLOW_FW_BROADCAST_EXT":"no",
"FW_ALLOW_FW_BROADCAST_INT":"no", "FW_CONFIGURATIONS_DMZ":"",
"FW_CONFIGURATIONS_EXT":"", "FW_CONFIGURATIONS_INT":"", "FW_DEV_DMZ":"",
"FW_DEV_EXT":"any", "FW_DEV_INT":"eth0",
"FW_FORWARD_ALWAYS_INOUT_DEV":"", "FW_FORWARD_MASQ":"",
"FW_IGNORE_FW_BROADCAST_DMZ":"no", "FW_IGNORE_FW_BROADCAST_EXT":"yes",
"FW_IGNORE_FW_BROADCAST_INT":"no", "FW_IPSEC_TRUST":"no",
"FW_LOAD_MODULES":"", "FW_LOG_ACCEPT_ALL":"no",
"FW_LOG_ACCEPT_CRIT":"yes", "FW_LOG_DROP_ALL":"no",
"FW_LOG_DROP_CRIT":"yes", "FW_MASQUERADE":"no",
"FW_PROTECT_FROM_INT":"no", "FW_ROUTE":"no",
"FW_SERVICES_ACCEPT_DMZ":"", "FW_SERVICES_ACCEPT_EXT":"",
"FW_SERVICES_ACCEPT_INT":"", "FW_SERVICES_DMZ_IP":"",
"FW_SERVICES_DMZ_RPC":"", "FW_SERVICES_DMZ_TCP":"",
"FW_SERVICES_DMZ_UDP":"", "FW_SERVICES_EXT_IP":"",
"FW_SERVICES_EXT_RPC":"", "FW_SERVICES_EXT_TCP":"",
"FW_SERVICES_EXT_UDP":"", "FW_SERVICES_INT_IP":"",
"FW_SERVICES_INT_RPC":"", "FW_SERVICES_INT_TCP":"",
"FW_SERVICES_INT_UDP":"", "enable_firewall":false, "start_firewall":false].
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2499
Disabling firewall services
2007-10-24 17:25:30 <1> tribal-sfn2(9241) [YCP] Service.ycp:399
Disabling service SuSEfirewall2_setup
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] Service.ycp:399
Disabling service SuSEfirewall2_init
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:1338
Firewall services are stopped
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] SuSEFirewall.ycp:2428
Firewall has been stopped already
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] clients/firewall.ycp:42
Firewall module finished
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [YCP] clients/firewall.ycp:43
- ----------------------------------------
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [wfm]
WFMSubAgent.cc(~WFMSubAgent):41 Deleting SubAgent: 0 scr
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [liby2]
Y2ProgramComponent.cc(result):159 Sending result: `result (nil)
2007-10-24 17:25:31 <1> tribal-sfn2(9241) [liby2]
genericfrontend.cc(main):571 Finished YaST2 component 'y2base'
monkey9@tribal-sfn2:~>
Also, what version of X are you running? Have you installed Beta 3 at all?
If you can get to runlevel 3 try the following:
sudo zypper ar
http://download.opensuse.org/repositories/xorg73/openSUSE_10.3/ "Xorg 73"
I am scared of updating x-server, i had to re-install several times
after a broken x-org update....
I had an update for 10.3: 4595-0, and did not reboot yet so, i dunno
what is gonna happen after rebooting.. ;-/
^ Above is a single command
sudo zypper update -t "Xorg 73"
That will update xorg to 7.3 which is should be and not 7.2 (which actually
shipped with 10.3)
sudo zypper ar
http://download.opensuse.org/repositories/KDE:/KDE4/openSUSE_10.3/ "KDE 4"
^ Above is a single command
sudo zypper update -t "KDE 4"
tribal-sfn2:/home/monkey9 # zypper update -t package -r "openSUSE_10.3.KDE4"
* Cache van bron 'openSUSE_10.3.KDE4' lezen
* Geïnstalleerde pakketten worden gelezen [100%]
De volgende pakketten zullen worden opgewaardeerd:
kdegames4-carddecks-default oxygen-icon-theme-scalable oxygen-icon-theme
kdegames4-carddecks-other clucene-core extragear-libs libkdegames4 libexiv2
extragear-plasma extragear-utils extragear-sdk libkdecore4 strigi
extragear-base
kdegames4 kdelibs4-core extragear-pim
Totale downloadgrootte: 60,3 M Na de operatie zal 2,7 M worden vrijgemaakt.
Doorgaan? [ja/nee]: j
pakket kdegames4-carddecks-default-3.94.1-4.1.noarch wordt gedownload,
1,6 M (1,7 M uitgepakt)
Downloadt: kdegames4-carddecks-default-3.94.1-4.1.noarch.rpm
* Downloading [100%]
* Installeert kdegames4-carddecks-default-3.94.1-4.1 [100%]
pakket oxygen-icon-theme-3.94.1-7.2.noarch wordt gedownload, 9,8 M (44,7
M uitgepakt)
Downloadt: oxygen-icon-theme-3.94.1-7.2.noarch.rpm
* Downloading [100%]
* Installeert oxygen-icon-theme-3.94.1-7.2 [100%]
pakket clucene-core-0.9.20-1.1.x86_64 wordt gedownload, 363,3 K (1,2 M
uitgepakt)
Downloadt: clucene-core-0.9.20-1.1.x86_64.rpm
* Downloading [100%]
* Installeert clucene-core-0.9.20-1.1 [100%]
pakket libexiv2-0.15-10.1.x86_64 wordt gedownload, 531,6 K (1,7 M uitgepakt)
Downloadt: libexiv2-0.15-10.1.x86_64.rpm
* Downloading [100%]
* Installeert libexiv2-0.15-10.1 [100%]
pakket libkdecore4-3.94.1-4.2.x86_64 wordt gedownload, 716,5 K (2,0 M
uitgepakt)
Downloadt: libkdecore4-3.94.1-4.2.x86_64.rpm
* Downloading [100%]
* Installeert libkdecore4-3.94.1-4.2 [100%]
pakket oxygen-icon-theme-scalable-3.94.1-7.2.noarch wordt gedownload,
32,2 M (36,1 M uitgepakt)
Downloadt: oxygen-icon-theme-scalable-3.94.1-7.2.noarch.rpm
* Downloading [100%]
* Installeert oxygen-icon-theme-scalable-3.94.1-7.2 [100%]
pakket kdegames4-carddecks-other-3.94.1-4.1.noarch wordt gedownload, 8,2
M (13,8 M uitgepakt)
Downloadt: kdegames4-carddecks-other-3.94.1-4.1.noarch.rpm
* Downloading [100%]
* Installeert kdegames4-carddecks-other-3.94.1-4.1 [100%]
pakket strigi-0.5.6-3.1.x86_64 wordt gedownload, 1,0 M (4,8 M uitgepakt)
Downloadt: strigi-0.5.6-3.1.x86_64.rpm
* Downloading [100%]
* Installeert strigi-0.5.6-3.1 [100%]
pakket kdelibs4-core-3.94.1-4.2.x86_64 wordt gedownload, 119,4 K (437,5
K uitgepakt)
Downloadt: kdelibs4-core-3.94.1-4.2.x86_64.rpm
* Downloading [100%]
* Installeert kdelibs4-core-3.94.1-4.2 [100%]
pakket extragear-libs-3.94.0.svn725487-1.9.x86_64 wordt gedownload,
572,2 K (14,9 M uitgepakt)
Downloadt: extragear-libs-3.94.0.svn725487-1.9.x86_64.rpm
* Downloading [100%]
* Installeert extragear-libs-3.94.0.svn725487-1.9 [100%]
pakket libkdegames4-3.94.1-3.1.x86_64 wordt gedownload, 393,8 K (1,2 M
uitgepakt)
Downloadt: libkdegames4-3.94.1-3.1.x86_64.rpm
* Downloading [100%]
* Installeert libkdegames4-3.94.1-3.1 [100%]
pakket extragear-plasma-3.94.0-2.9.x86_64 wordt gedownload, 3,6 M (14,1
M uitgepakt)
Downloadt: extragear-plasma-3.94.0-2.9.x86_64.rpm
* Downloading [100%]
* Installeert extragear-plasma-3.94.0-2.9 [100%]
pakket extragear-utils-3.94.0.svn724088-4.2.x86_64 wordt gedownload,
295,4 K (7,0 M uitgepakt)
Downloadt: extragear-utils-3.94.0.svn724088-4.2.x86_64.rpm
* Downloading [100%]
* Installeert extragear-utils-3.94.0.svn724088-4.2 [100%]
pakket extragear-sdk-3.94.0.svn725631-2.5.x86_64 wordt gedownload, 283,3
K (12,8 M uitgepakt)
Downloadt: extragear-sdk-3.94.0.svn725631-2.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-sdk-3.94.0.svn725631-2.5 [100%]
pakket extragear-base-3.94.0.svn725482-2.5.x86_64 wordt gedownload,
546,8 K (17,7 M uitgepakt)
Downloadt: extragear-base-3.94.0.svn725482-2.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-base-3.94.0.svn725482-2.5 [100%]
pakket extragear-pim-3.94.0.svn726610-1.5.x86_64 wordt gedownload, 61,9
K (1,8 M uitgepakt)
Downloadt: extragear-pim-3.94.0.svn726610-1.5.x86_64.rpm
* Downloading [100%]
* Installeert extragear-pim-3.94.0.svn726610-1.5 [100%]
pakket kdegames4-3.94.1-3.1.x86_64 wordt gedownload, 23,6 K (66,6 K
uitgepakt)
Downloadt: kdegames4-3.94.1-3.1.x86_64.rpm
* Downloading [100%]
* Installeert kdegames4-3.94.1-3.1 [100%]
tribal-sfn2:/home/monkey9 #
This will update your KDE 4 to KDE 4 Beta 3 :o)..
Let me know how it goes.
Lets hope the last x-server update did not break the install again.. ;-)
- --
Have a nice day,
M9. Now, is the only time that exists.
OS: Linux 2.6.22.5-31-default x86_64
Huidige gebruiker: monkey9@tribal-sfn2
Systeem: openSUSE 10.3 (x86_64)
KDE: 3.5.8 "release 21.2"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.4-svn0 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org
iD8DBQFHH4sHX5/X5X6LpDgRAnUzAKC2TL5JDw4HSo8f+Kt8vKfcR0nOlwCgu4BL
092FE8gW79a+IG9JEiVDyk8=
=L+I4
-----END PGP SIGNATURE-----
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-kde+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-kde+help@xxxxxxxxxxxx
| < Previous | Next > |