June 2003 - openSUSE KDE - openSUSE Mailing Lists

KMail filter on IMAP folder
by NeoFax 30 Jun '03

30 Jun '03

I am having a problem with filtering a email in my IMAP Inbox folder to another folder on the IMAP server. Kmail will let me move it to a folder on the local machine, but not to a different folder on the server. Any help would be appreciated. Thanks! NeoFax

2 1

Re: Uninstalling grub
by Daniel Eckl 29 Jun '03

29 Jun '03

Am Sonntag, 29. Juni 2003 21:37 schrieb Hal Keene: > Anyone know how to remove the master boot record (MBR)? I have dumped Linux > from my hard drive to load Win 2000 and the Grub loader will not allow the > win2000 cd to continue the setup. Somehow after I fdisked this hard drive, > BIOS still see's the grub loader. > Hal Hi Hal! http://sdb.suse.de/en/sdb/html/fhassel_deinstall_grub.html Greets, Daniel

2 1

Artsd and other sound applications
by Alberto Vecchiato 27 Jun '03

27 Jun '03

Hi, I'm using Suse 8.1 with KDE 3.0.3, and have a problem using XMMS. In practice the artsd sound server locks the access to the sound card so that XMMS finds the device busy. The obvious quick remedy would be not to run artsd at startup, but I would rather try to make XMMS pass through it, if possible. Can anyone help me? Thanks in advance, Alberto

6 14

Artsd problem: solved!
by Alberto Vecchiato 27 Jun '03

27 Jun '03

Hi there! First of all, many thanks to all of you. I didn't expect so fast and lot of reply, wow! I tried the solution of xmms-kde and it worked at once. If I can only comment on this issue, there is only a small bug I noticed. Just after the installation of xmms-kde, XMMS is using the arts plugin, but on the menu it appears the oss is still used, instead. Thanks again a lot. Alberto

2 1

Re: [suse-kde]vncserver
by Dirk Drexlin 26 Jun '03

26 Jun '03

Thanks for all the hints. krfb does what I need. One can use control center to change the behaviour. Here you can configure, that it starts automatically and that the user doesn't have to accept the session. That's what I did and it is great and easy (I think). The only problem was that I had to restart before the feature with the acceptance did work. The user sees that somebody is watching ... but I find this is good. Greetings Dirk

1 0

Re: [suse-kde] vncserver
by Andreas Bisiach/i-Seven 25 Jun '03

25 Jun '03

Forget my question, I worked it around by commenting the section in the Makefile needed to create the docs file... I little bit more patience instead of posting.....:-) Regards /Andreas -----Andreas Bisiach/i-Seven <Andreas.Bisiach(a)i-seven.dk> wrote: ----- To: Daniel Eckl <daniel.eckl(a)gmx.de> From: Andreas Bisiach/i-Seven <Andreas.Bisiach(a)i-seven.dk> Date: 25-06-2003 6:46 cc: suse-kde(a)suse.com Subject: Re: [suse-kde] vncserver Hi, I was trying to see if gemsvnc could help me out... I am pretty new to linux and I am having difficulties in compiling it. Have you have tried it on SuSE? I first needed to edit the Makefile (was pointing to include files belonging to Redhat) After that I tried with a Make but it still fails with the error: /bin/sh C2html command not found. sorry for being so neewbie but I don't have a clue :-) what to do /Andreas -----Daniel Eckl <daniel.eckl(a)gmx.de> wrote: ----- To: suse-kde(a)suse.com From: Daniel Eckl <daniel.eckl(a)gmx.de> Date: 24-06-2003 20:14 Subject: Re: [suse-kde] vncserver > But there is a predecessor named gemsvnc Oups... too less coffee... change user... x0rfbserver is the predecessor of gemsvnc gemsvnc is the successor of x0rfbserver. No worry, I'll be fine later this day. :)) Greets, Daniel -- To unsubscribe, email: suse-kde-unsubscribe(a)suse.com For additional commands, email: suse-kde-help(a)suse.com Please do not cross-post to suse-linux-e -- To unsubscribe, email: suse-kde-unsubscribe(a)suse.com For additional commands, email: suse-kde-help(a)suse.com Please do not cross-post to suse-linux-e

2 1

Re: [suse-kde] vncserver
by Andreas Bisiach/i-Seven 25 Jun '03

25 Jun '03

Hi, I was trying to see if gemsvnc could help me out... I am pretty new to linux and I am having difficulties in compiling it. Have you have tried it on SuSE? I first needed to edit the Makefile (was pointing to include files belonging to Redhat) After that I tried with a Make but it still fails with the error: /bin/sh C2html command not found. sorry for being so neewbie but I don't have a clue :-) what to do /Andreas -----Daniel Eckl <daniel.eckl(a)gmx.de> wrote: ----- To: suse-kde(a)suse.com From: Daniel Eckl <daniel.eckl(a)gmx.de> Date: 24-06-2003 20:14 Subject: Re: [suse-kde] vncserver > But there is a predecessor named gemsvnc Oups... too less coffee... change user... x0rfbserver is the predecessor of gemsvnc gemsvnc is the successor of x0rfbserver. No worry, I'll be fine later this day. :)) Greets, Daniel -- To unsubscribe, email: suse-kde-unsubscribe(a)suse.com For additional commands, email: suse-kde-help(a)suse.com Please do not cross-post to suse-linux-e

1 0

Re: [suse-kde] vncserver
by Andreas Bisiach/i-Seven 25 Jun '03

25 Jun '03

Hi, I am looking for a solution to this too. I have test installed SuSE 8.2 and liked a lot that under inetd services I can autotstart a vncserver that presents med with the KDE logon screen. (this is when I use vnclient vncserver:10 or 11 But I too miss a way of connecting to my box on screen 0 as see what is on the default screen. You mentioned krfb, since I am new to suse 8.2 I am not sur what it is but I guess that is the feature that after I log on kde, I can invite other to share my desktop. Is there any way to autostart that feature as well ? so that I don't need to log in KDE to share screen 0 Thanks Andreas -----Daniel Eckl <daniel.eckl(a)gmx.de> wrote: ----- To: suse-kde(a)suse.com From: Daniel Eckl <daniel.eckl(a)gmx.de> Date: 24-06-2003 19:47 Subject: Re: [suse-kde] vncserver Hi Jianyu! I'm very, very sure that this is exactly the opposite of that what he wants to do. He doesn't want to start a new session, he wants to connect with vnc to the current local display running a local session of kde, like the way winvnc works. While this is not possible without a hacked vncserver, he can use krfb which is a vnc compatible server showing the current running local kde 3.1 session. krfb is included in KDE since 3.1 and can be compiled against kde 3.0, too. Greets, Daniel Am Dienstag, 24. Juni 2003 19:29 schrieb Jianyu Wang: > I think when all the thing are correct, you will find the file > /root/.vnc/xstartup. So replace the original with the following line : > kde -geometry 1024X860+10+10 -ls -title "what you want" > or you can replace kde with gnome, when you want use gnomw. > Don´t forget, use vncviewer like this, 192.168.0.1:1 or 2 and so on. > Shanshui > > > ----- Original Message ----- > From: "Dirk Drexlin" <drexlin(a)khs-calw.de> > To: <suse-kde(a)suse.com> > Sent: Tuesday, June 24, 2003 2:11 PM > Subject: [suse-kde] vncserver > > > How can I configure vncserver, so that it is possible just to watch the > > standard desktop? vncserver always starts a new display but I want to see > > (with vncviewer) whats on the current display. I tried it with ipadress:0 > > but it didn't work. > > What do I have to do? Is it possible at all? > > > > Dirk > > > > > > -- > > To unsubscribe, email: suse-kde-unsubscribe(a)suse.com > > For additional commands, email: suse-kde-help(a)suse.com > > Please do not cross-post to suse-linux-e -- To unsubscribe, email: suse-kde-unsubscribe(a)suse.com For additional commands, email: suse-kde-help(a)suse.com Please do not cross-post to suse-linux-e

1 0

RE: [suse-kde] vncserver
by Eric Carbone 24 Jun '03

24 Jun '03

Try X0rfbserver ... I use it to control a client's linux server (running Gnome) and it works real well for me ... a la pcA http://www.icewalkers.com/Linux/Software/513000/x0rfbserver.html ----- Eric Carbone > -----Original Message----- > From: Dirk Drexlin [mailto:drexlin@khs-calw.de] > Sent: Tuesday, June 24, 2003 8:11 AM > To: suse-kde(a)suse.com > Subject: [suse-kde] vncserver > > How can I configure vncserver, so that it is possible just to watch the > standard desktop? > vncserver always starts a new display but I want to see (with vncviewer) > whats on the current display. I > tried it with ipadress:0 but it didn't work. > What do I have to do? Is it possible at all? > > Dirk > > > -- > To unsubscribe, email: suse-kde-unsubscribe(a)suse.com > For additional commands, email: suse-kde-help(a)suse.com > Please do not cross-post to suse-linux-e

2 2

vncserver
by Dirk Drexlin 24 Jun '03

24 Jun '03

How can I configure vncserver, so that it is possible just to watch the standard desktop? vncserver always starts a new display but I want to see (with vncviewer) whats on the current display. I tried it with ipadress:0 but it didn't work. What do I have to do? Is it possible at all? Dirk

3 2