On Wed, Jul 26, 2006 at 05:00:47PM +0200, Gernot Reiter wrote:
Am Mittwoch, 26. Juli 2006 16:47 schrieb Karsten Keil:
On Wed, Jul 26, 2006 at 02:59:53PM +0200, Gernot Reiter wrote:
doch werden sie, mal rpm capi4hylafax -ql |grep config bzw. rpm capi4hylafax -V
machen
fit4wlan:/etc # rpm capi4hylafax -ql |grep config /etc/config.faxCAPI.sample /usr/share/doc/packages/capi4hylafax/config.faxCAPI /usr/share/doc/packages/capi4hylafax/sample_AVMC4_config.faxCAPI fit4wlan:/etc # rpm capi4hylafax -V missing /etc/config.faxCAPI.sample fit4wlan:/etc #
Unauffindbar. Komisch
AcceptSpeech wuerde ich auf 1 stellen. AcceptGlobalCall eventuell auf 0, kommt auf die Anlage an.
Funktioniert auch nicht.
OK dann von vorn.
Welche HW (CPU, Karte) ?
Welche OS Version ? Suse 10
Die gibt es nicht (10.0, 10.1, SLES10, SLED10) ...
Distribution: SUSE LINUX 10.0 (i586)
OK also 10.0 mit Intel/AMD 32 bit.
fit4wlan:~ # capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.11-07 (49.23) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 for fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 T.30 for fax group 3 with extensions Modem
0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000
Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS
fit4wlan:~ #
pa ax |grep capi
fit4wlan:~ # ps aux | grep capi root 4510 0.2 4.9 35900 9440 ? Ssl Jul21 16:36 /usr/sbin/capisuite -d root 17380 0.0 0.3 2788 728 pts/1 S+ 16:56 0:00 grep capi
OK capisuite. Was willst Du laufen lassen, capisuite oder hylafax ? Das sind unterschiedliche Applikationen die auch unterschiedliche Konfigurationen benoetigen.
fit4wlan:~ #
Steht etwas im hylafax log, wenn ein Ruf ankommt (/var/spool/fax/log/... ?
Was sagt ein CAPI Trace eines Anrufs avmcapictrl trace on
fit4wlan:~ # avmcapictrl trace on avmcapictrl: trace switched on, look at the kernel messages, check dmesg(8) fit4wlan:~ #
(in /var/log/messages)
Jul 26 16:55:11 fit4wlan kernel: kcapi: contr 1 set trace=4 Jul 26 16:55:25 fit4wlan kernel: kcapi: put [0x1] LISTEN_REQ ID=001 #0x1b1d LEN=0026 Jul 26 16:55:25 fit4wlan kernel: Controller/PLCI/NCCI = 0x1 Jul 26 16:55:25 fit4wlan kernel: InfoMask = 0x40 Jul 26 16:55:25 fit4wlan kernel: CIPmask = 0x1fff03ff Jul 26 16:55:25 fit4wlan kernel: CIPmask2 = 0x0 Jul 26 16:55:25 fit4wlan kernel: CallingPartyNumber = default Jul 26 16:55:25 fit4wlan kernel: CallingPartySubaddress = default Jul 26 16:55:25 fit4wlan kernel: Jul 26 16:55:25 fit4wlan kernel: kcapi: got [0x1] LISTEN_CONF ID=001 #0x1b1d LEN=0014 Jul 26 16:55:25 fit4wlan kernel: Controller/PLCI/NCCI = 0x1 Jul 26 16:55:25 fit4wlan kernel: Info = 0x0 Jul 26 16:55:25 fit4wlan kernel:
Da kommt kein Ruf bei der Karte an. -- Karsten Keil SuSE Labs ISDN development