Am Donnerstag, 20. Januar 2005 17:47 schrieb Karsten Keil: mit apic als boot promt ergibt sich: ja@linux:~> mit apic als bootpromt bash: mit: command not found ja@linux:~> ja@linux:~> capiinfo Number of Controllers : 1 Controller 1: Manufacturer: AVM GmbH CAPI Version: 2.0 Manufacturer Version: 3.101-02 (49.18) Serial Number: 1000001 BChannels: 2 Global Options: 0x00000039 internal controller supported DTMF supported Supplementary Services supported channel allocation supported (leased lines) B1 protocols support: 0x4000011f 64 kbit/s with HDLC framing 64 kbit/s bit-transparent operation V.110 asynconous operation with start/stop byte framing V.110 synconous operation with HDLC framing T.30 modem for fax group 3 Modem asyncronous operation with start/stop byte framing B2 protocols support: 0x00000b1b ISO 7776 (X.75 SLP) Transparent LAPD with Q.921 for D channel X.25 (SAPI 16) T.30 for fax group 3 ISO 7776 (X.75 SLP) with V.42bis compression V.120 asyncronous mode V.120 bit-transparent mode B3 protocols support: 0x800000bf Transparent T.90NL, T.70NL, T.90 ISO 8208 (X.25 DTE-DTE) X.25 DCE T.30 for fax group 3 T.30 for fax group 3 with extensions Modem 0100 0200 39000000 1f010040 1b0b0000 bf000080 00000000 00000000 00000000 00000000 00000000 00000000 01000001 00020000 00000000 00000000 00000000 Supplementary services support: 0x000003ff Hold / Retrieve Terminal Portability ECT 3PTY Call Forwarding Call Deflection MCID CCBS ja@linux:~> su Password: linux:/home/ja # cat /proc/interrupts CPU0 0: 205210 IO-APIC-edge timer 1: 176 IO-APIC-edge i8042 9: 0 IO-APIC-level acpi 12: 5792 IO-APIC-edge i8042 14: 2443 IO-APIC-edge ide0 169: 57352 IO-APIC-level ohci1394, fcpci 177: 0 IO-APIC-level libata 185: 677 IO-APIC-level SysKonnect SK-98xx 193: 9899 IO-APIC-level libata 201: 56 IO-APIC-level uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, ehci_hcd 209: 218 IO-APIC-level VIA8233 NMI: 0 LOC: 205165 ERR: 0 MIS: 0 linux:/home/ja # sonderbar finde ich , dass der irq im suse plugger in der isdn hardware für die fritzcard mit 169 angegeben ist . Gestern wars noch 11 Kommen wir weiter????????????? Jörg
On Thu, Jan 20, 2005 at 05:10:40PM +0100, LogoAbel@web.de wrote: ...
linux:/home/ja #
Wie schalte ich apic beim booten ein???
Ist ein boot parameter: apic (genau wie acpi=off bzw pci=noacpi).
Wie kann ich im bios einen interrupt isolieren für fritz? Ami bios , ist alles auf Pnp eingestellt.
Das haengt vom BIOS und Hersteller ab, meist hilft es nicht, bei einigen kann man die PCI IRQs zuweisen.
Was kann mir ein Umstecken der Karte einbringen??
Normalerweise bekommt jeder Slot einen anderen IRQ (OK bei 4 slots, bei 5 sind 2 gleich).
-- Karsten Keil SuSE Labs ISDN development