HAllo, warum protokolliert isdnlog eine zu wählende Nummer 01921 anstelle von 01019-01921 ? Es soll auch 0101901921 gewählt werden und nicht nur 01921 ! Als Ortskennzahl habe ich 0721 angegeben und nicht 01019. Warum wird 01019 abgehackt ? .. ich bekomme langsam die Krätze ! Feb 4 19:35:25 linux kernel: ippp0: dialing 1 0101901921... Feb 4 19:35:25 linux isdnlog: Feb 04 19:35:25 * tei 105 calling 01921 with +49 721/8307xxx, Karlsruhe RING (Data) Feb 4 19:35:25 linux isdnlog: Feb 04 19:35:25 tei 105 calling 01921 with +49 721/8307xxx, Karlsruhe Invalid number format (address incomplete) (Public network serving local user) Natürlich ist die Nummer "01921" invalid , wer hätte es gedacht! Was ist da los ? (habe übrigens eine Sedlbauer Speed Start PCMCIA) BTW: natürlich habe ich ein SuSEconfig --module isdn ausgeführt natürlich habe ich ISDN herunterfahren (durch Karte herausziehen) natürlich habe ich danach auch nochmal neu gebootet. /etc/sysconfig/cfg-contr0 : REACODE="0721" DIALPREFIX="" DRIVER="hisax" NAME="Sedlbauer Speed Star" PARA_SUBTYPE="2" PARA_TYPE="22" PROTOCOL="euro" STARTMODE="hotplug" /etc/sysconfig/cfg-net0 : CHARGEHUP="on" DEFAULTROUTE="yes" DYNAMICIP="yes" IPADDR="" MSN="8307xxx" MULTILINK="no" PROTOCOL="syncppp" PROVIDER="provider0" PTPADDR="" STARTMODE="hotplug" linux:/etc/sysconfig/isdn # isdnctrl list all Current setup of interface 'ippp0': EAZ/MSN: 8307xxx Phone number(s): Outgoing: 0101901921 Incoming: Dial mode: manual Secure: on Callback: off Reject before Callback: on Callback-delay: 2 Dialmax: 1 Hangup-Timeout: 300 Incoming-Hangup: off ChargeHangup: on Charge-Units: 0 Charge-Interval: 0 Layer-2-Protocol: hdlc Layer-3-Protocol: trans Encapsulation: syncppp Slave Interface: None Slave delay: 10 Master Interface: None Pre-Bound to: Nothing PPP-Bound to: 0 thx Ekkard