On Sat, Oct 27, 2001 at 03:36:47PM +0200, Andreas Meyer wrote:
Hallo!
Am Sat, 27 Oct 2001 14:10:13 +0200 schrieb Karsten Keil
: Habe ich eine Chance, die sekündlichen Verbindungsmeldungen in /var/log/messages wegzubekommen?
Wie sehen die aus, mir sind keine sekuendlichen Meldungen die von I4L_HISAXDEBUG=4 abhaengen bekannt.
Oct 27 15:25:51 shiva ipppd[98]: Local number: 648100, Remote number: 01xxxxx, Type: outgoing Oct 27 15:25:51 shiva ipppd[98]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 7 Oct 27 15:25:51 shiva kernel: isdn_net: ippp0 connected Oct 27 15:25:52 shiva ipppd[98]: Remote message: Oct 27 15:25:52 shiva ipppd[98]: MPPP negotiation, He: No We: No Oct 27 15:25:52 shiva ipppd[98]: CCP enabled! Trying CCP. Oct 27 15:25:52 shiva ipppd[98]: CCP: got ccp-unit 0 for link 0 (protocol: 0x80fd) Oct 27 15:25:52 shiva ipppd[98]: ccp_resetci! Oct 27 15:25:52 shiva ipppd[98]: local IP address 213.240.141.55 Oct 27 15:25:52 shiva ipppd[98]: remote IP address 195.8.240.236
Oct 27 15:25:52 shiva isdnlog: Oct 27 15:25:52 tei 83 calling KDT with ISDN-Router 2.CI 0.001 DM (after 0:00:01) Oct 27 15:25:53 shiva isdnlog: Oct 27 15:25:53 tei 83 calling KDT with ISDN-Router 3.CI 0.001 DM (after 0:00:02) ... Scheinbar generiert der Provider AOCDs (Gebuehren Infos) im Sekundentakt.
Bit 2 (=0x0004) muss gesetzt sein um D-channel Meldungen zu bekommen. (man hisaxctrl)
Die Konfiguration ist ja auf mehrere files verteilt. Ich habe schon alles mögliche versucht. Schön finde ich diese Meldungen nicht und der Sinn ist mir auch nicht klar.
Schau Die mal die manpage isdnlog genauer an, das sind Gebuehren Infos (Charge Info = CI). zum einen: LOG MODULE ... 0x20 Show charge int and telephone costs with every charge signal (in Germany, and perhaps other coun- tries, you have to pay to get these signals). ... d.h. wenn Du in /etc/isdn/isdnlog.isdnctrl0 bei syslog=XXX das Bit 5 gesetzt ist, werden chargeinfos angezeigt Der default ist 1013 = 0x3f5 = 0x200+0x100+0x80+0x40+0x20+0x10+0x4+0x1 zum zweiten kannst Du mit -Ix:y ciinterval="value[:value]" Interval for printing of charge messages (0x20). The first value is the interval for the calculated CI, the second value for the EH (AOC-D) messages. If only one value is given, both intervals are set to this value. das Intervall in dem die Infos ausgegeben werden einstellen. -- Karsten Keil SuSE Labs ISDN development