Hallo, ich möchte mich in meinen Rechner einwählen können. Leider funktioniert dies seit der Installation von SuSE 7.1 nicht mehr. Sonst läuft die ISDN-Karte jedoch problemlos. Ich kann mich mit minicom (ttyI/8109147) in andere Rechner einwählen, das Internet geht auch. Ich habe in /etc/mgetty.config Folgendes eingetragen: port ttyI0 debug 8 init-chat "" ATZ OK AT&E8109148 OK modem-type data Danach habe ich init q eingegeben. Nun habe ich versucht, mich selbst via minicom einzuwählen : Ergebnis: NO CARRIER . Ich bekomme einfach keinen Connect. /var/log/messages sieht so aus: Es zeigt zuerst eine erfolgreiche Einwahl bei meinem Provider, danach der erfolglose Versuch bei der Einwahl in meinen eigenen Rechner. Apr 11 08:31:27 linux PAM-unix2[938]: session started for user walther, service su Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 * tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg RING (Data) Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg Time:Wed Apr 11 08:31:00 2001 Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg CONNECT (Data) Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg CHARGE: 0.120 DM/90s = 0.080 DM/Min (DTAG ISDN, City, Werktag (Mittwoch), Wochentag) Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg HINT: Better use 01030:TelDaFax, 0.001 DM/1s = 0.039 DM/Min, saving 0.055 DM/Min Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg 1.CI 0.120 DM (now) Apr 11 08:31:48 linux isdnlog: Apr 11 08:31:48 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg NEXT CI AFTER 01:30 (DTAG ISDN, City, Werktag (Mittwoch), Wochentag) Apr 11 08:32:04 linux isdnlog: Apr 11 08:32:04 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg Normal call clearing (User) Apr 11 08:32:04 linux isdnlog: Apr 11 08:32:04 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg HINT: Cheapest booked 01030:TelDaFax 0.011 DM (would save 0.109 DM) Apr 11 08:32:04 linux isdnlog: Apr 11 08:32:04 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg HINT: LCR:FAILED Apr 11 08:32:04 linux isdnlog: Apr 11 08:32:04 tei 107 calling +49 911/530570, Nürnberg with +49 911/8109147, Nürnberg HANGUP (1 CI 0.120 DM; 1 EH DEM 1.056 0:00:16 I=832.0 b O= 17.0 b) Apr 11 08:32:15 linux PAM-unix2[938]: session finished for user walther, service su Apr 11 08:32:18 linux su: (to walther) root on /dev/pts/1 Apr 11 08:32:18 linux PAM-unix2[947]: session started for user walther, service su Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 * tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg RING (Data) Apr 11 08:32:31 linux kernel: isdn_net: call from 9118109147,7,0 -> 8109148 Apr 11 08:32:31 linux kernel: ippp0: call from 9118109147 -> 8109148 accepted Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 * Call to tei 127 from +49 911/8109147, Nürnberg on +49 911/8109148, Nürnberg RING (Data) Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 Call to tei 107 from +49 911/8109147, Nürnberg on +49 911/8109148, Nürnberg CONNECT (Data) Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg Time:Wed Apr 11 08:32:00 2001 Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg CONNECT (Data) Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg CHARGE: 0.120 DM/90s = 0.080 DM/Min (DTAG ISDN, City, Werktag (Mittwoch), Wochentag) Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg HINT: Better use 01030:TelDaFax, 0.001 DM/1s = 0.039 DM/Min, saving 0.055 DM/Min Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg 1.CI 0.120 DM (now) Apr 11 08:32:31 linux isdnlog: Apr 11 08:32:31 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg NEXT CI AFTER 01:30 (DTAG ISDN, City, Werktag (Mittwoch), Wochentag) Apr 11 08:32:31 linux ipppd[868]: Local number: 8109148, Remote number: , Type: incoming Apr 11 08:32:31 linux ipppd[868]: PHASE_WAIT -> PHASE_ESTABLISHED, ifunit: 0, linkunit: 0, fd: 8 Apr 11 08:32:31 linux kernel: isdn_net: ippp0 connected Apr 11 08:32:31 linux kernel: lldata_handler unknown primitive 0x232 Apr 11 08:32:34 linux kernel: lldata_handler unknown primitive 0x232 Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg Normal call clearing (User) Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg HINT: Cheapest booked 01030:TelDaFax 0.004 DM (would save 0.116 DM) Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg HINT: LCR:FAILED Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 tei 107 calling +49 911/8109148, Nürnberg with +49 911/8109147, Nürnberg HANGUP (1 CI 0.120 DM; 1 EH DEM 1.056 0:00:05) Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 Call to tei 107 from +49 911/8109147, Nürnberg on +49 911/8109148, Nürnberg Normal call clearing (User) Apr 11 08:32:36 linux kernel: ippp0: remote hangup Apr 11 08:32:36 linux kernel: ippp0: Chargesum is 0 Apr 11 08:32:36 linux ipppd[868]: Modem hangup Apr 11 08:32:36 linux isdnlog: Apr 11 08:32:36 Call to tei 107 from +49 911/8109147, Nürnberg on +49 911/8109148, Nürnberg HANGUP ( 0:00:05 I= 10.0 b O= 36.0 b) Apr 11 08:32:36 linux ipppd[868]: Connection terminated. Apr 11 08:32:36 linux ipppd[868]: taking down PHASE_DEAD link 0, linkunit: 0 Apr 11 08:32:36 linux ipppd[868]: closing fd 8 from unit 0 Apr 11 08:32:36 linux ipppd[868]: link 0 closed , linkunit: 0 Apr 11 08:32:36 linux ipppd[868]: reinit_unit: 0 Apr 11 08:32:36 linux ipppd[868]: Connect[0]: /dev/ippp0, fd: 8 Apr 11 08:32:36 linux kernel: ippp_ccp: freeing reset data structure c549e000 Apr 11 08:32:36 linux kernel: ippp, open, slot: 0, minor: 0, state: 0000 Apr 11 08:32:36 linux kernel: ippp_ccp: allocated reset data structure c549e000 Apr 11 08:32:47 linux PAM-unix2[947]: session finished for user walther, service su Wo könnte der Fehler stecken? Irgendetwas muss sich von Suse 7.0 auf 7.1 in der default-Konfiguration geändert haben, denn vorher lief die Einwahl problemlos. Jetzt benutze ich allerdings den 2.4er Kernel, wie er standardmäßig von SuSE mitgeliefert wird,ich habe isdn einfach mit yast2 konfiguriert. +++++++ Meine rc.config sieht für ISDN so aus: ++++++++++ # # enable "isdnctrl verbose $I4L_VERBOSE_LEVEL" (yes or no) # I4L_VERBOSE="yes" # # verbose level (default 3; it 'll log the dialin trigger paket) # I4L_VERBOSE_LEVEL="3" # # idletime before hangup (in seconds) # I4L_IDLETIME_0="60" I4L_IDLETIME_1="90" I4L_IDLETIME_2="60" I4L_IDLETIME_3="60" # # Set the number of dial atempts for each number # set to "" for unlimited # I4L_DIALMAX_0="2" I4L_DIALMAX_1="" I4L_DIALMAX_2="2" I4L_DIALMAX_3="2" # # my phone number (MSN/EAZ) # On NI1 lines MSN:SPID # I4L_LOCALMSN_0="" I4L_LOCALMSN_1="8109148" I4L_LOCALMSN_2="" I4L_LOCALMSN_3="" # # remote station phone number dialout # example: "09113206726 09113206728" # I4L_REMOTE_OUT_0="" I4L_REMOTE_OUT_1="530570" I4L_REMOTE_OUT_2="" I4L_REMOTE_OUT_3="" # # remote station phone number dialin # example: "09113206726 09113206728" # I4L_REMOTE_IN_0="" I4L_REMOTE_IN_1="" I4L_REMOTE_IN_2="" I4L_REMOTE_IN_3="" # # encapsulation # possible values: "rawip" (default), "ip", "cisco-h", "ethernet", # "syncppp", "uihdlc" # see: /usr/src/linux/Documentation/isdn # and /usr/share/doc/packages/i4ldoc # I4L_ENCAP_0="syncppp" I4L_ENCAP_1="syncppp" I4L_ENCAP_2="rawip" I4L_ENCAP_3="rawip" # # secure # "on" = only defined numbers are allowed to call in # "off" = all numbers are allowed to call in # I4L_SECURE_0="on" I4L_SECURE_1="" I4L_SECURE_2="on" I4L_SECURE_3="on" # bind this netinterface to the ippp-device ("yes" or "no") I4L_PPPBIND_0="" I4L_PPPBIND_1="" I4L_PPPBIND_2="" I4L_PPPBIND_3="" # hangup befor next charge info ("on" or "off") # this only works, if your isdn-provider transmits the charge-info during # and after the connection I4L_CHARGEHUP_0="off" I4L_CHARGEHUP_1="off" I4L_CHARGEHUP_2="off" I4L_CHARGEHUP_3="off" # # hang-up-timer for incoming calls ("on" or "off") # I4L_IHUP_0="off" I4L_IHUP_1="" I4L_IHUP_2="off" I4L_IHUP_3="off" # # # layer-2 protocol (default: "hdlc") # With the ICN-driver and the Teles-driver, "x75i" and "hdlc" is available. # With other drivers, "x75ui", "x75bui" may be possible too # I4L_L2_0="hdlc" I4L_L2_1="" I4L_L2_2="hdlc" I4L_L2_3="hdlc" # # layer-3 protocol (only "trans" is allowed) # I4L_L3_0="trans" I4L_L3_1="" I4L_L3_2="trans" I4L_L3_3="trans" # # set interface dialmode # # - off No connections at all are possible. # This is similar to "isdnctrl status <if> off". # Useful if you want to be sure that _no_ connections # will be made. # # - manual Only outgoing connections made manually are possible. # Incoming connections can be made (they don't cost # anything :-) Incoming callback connections are _not_ # possible (they _do_ cost money). # This means that if you want to make a connection, you # have to give the command "isdnctrl dial <if>". # IMPORTANT: you also have to give the command # "isdnctrl hangup <if>" to stop the connection! It won't # hangup by itself. # # - auto This is the same as the old situation (before "isdnctrl # status"). When necessary, a connection will be made # automatically; this is also the only mode where incoming # callback calls will succeed (i.e. connections that you # call back). It will also hangup after the specified # huptimeout. # # - "manual" is the default. # # I4L_DIALMODE_0="auto" I4L_DIALMODE_1="manual" I4L_DIALMODE_2="auto" I4L_DIALMODE_3="auto" # # callback ("in" , "out" or "off") # "in" callback server # "out" callback client # the other host must accept this # I4L_CALLBACK_0="off" I4L_CALLBACK_1="off" I4L_CALLBACK_2="off" I4L_CALLBACK_3="off" # # callback delay in seconds (default: 2) # set to 1 for callback "out" to 3 for callback "in" # I4L_CBDELAY_0="2" I4L_CBDELAY_1="" I4L_CBDELAY_2="2" I4L_CBDELAY_3="2" # # activ hangup when getting an incoming call (default: "on") # I4L_CBHUP_0="on" I4L_CBHUP_1="" I4L_CBHUP_2="on" I4L_CBHUP_3="on" # # Slave Device for MPPP # see http://www.suse.de/Support/sdb/i4lmppp.html or # /usr/share/doc/packages/i4l/README.mppp for details # It maybe a list of devices # I4L_SLAVE_0="" I4L_SLAVE_1="" I4L_SLAVE_2="" I4L_SLAVE_3="" # # Some special cases for MPPP # # MSN if they differ from master # I4L_SLAVEMSN_0="" I4L_SLAVEMSN_1="" I4L_SLAVEMSN_2="" I4L_SLAVEMSN_3="" # # Outgoing remote phonenumbers if they differ from master # I4L_SLAVE_OUT_0="" I4L_SLAVE_OUT_1="" I4L_SLAVE_OUT_2="" I4L_SLAVE_OUT_3="" # # Incoming remote phonenumbers if they differ from master # I4L_SLAVE_IN_0="" I4L_SLAVE_IN_1="" I4L_SLAVE_IN_2="" I4L_SLAVE_IN_3="" ++++++++++++++++++ Leider hilft es auch nicht, wenn ich I4L_SECURE_0="on" I4L_SECURE_1="on" I4L_SECURE_2="on" I4L_SECURE_3="on" setze und meine Einwahlnummer eintrage. Alles auf off zu setzen bringt auch nichts. Die LOCAL_MSN durch weitere Einträge meiner MSN zu ergänzen, nützt auch nichts. Wo könnte denn der Fehler liegen? Ich habe schon alle möglichen Kombinationen ausprobiert, danach SuSEconfig gestartet und i4l neugestartet, aber leider immer ohne Erfolg. Vielleicht liegt das Problem ganz wo anders? Ich bin für jeden Tipp dankbar. Andreas Walther Andreas Walther ns176@fen-net.de andreas.walther@nefkom.net