Hi ! meine Fritz Card PCI mag nicht ! Ich hab´s mit Yast unter SuSE 7.0 nach Anleitung installiert aber ... insmod isdn Using /lib/modules/2.2.14/misc/isdn.o /lib/modules/2.2.14/misc/isdn.o: init_module: Das Gerät oder die Ressource ist belegt Hint: this error can be caused by incorrect module parameters, including invalid IO or IRQ parameters root@rappelkiste:/proc > insmod hisax Using /lib/modules/2.2.14/misc/hisax.o /lib/modules/2.2.14/misc/hisax.o: unresolved symbol register_isdn root@rappelkiste:/proc > mir dünkt da steht sich ein IRQ im Weg ... trotz PCI ? cat pci sagt PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies VT 82C505 (rev 3). Fast devsel. Master Capable. No bursts. Bus 0, device 8, function 0: Network controller: AVM Unknown device (rev 1). Vendor id=1244. Device id=e00. Medium devsel. Fast back-to-back capable. IRQ 5. Non-prefetchable 32 bit memory at 0xfc200000 [0xfc200000]. I/O at 0x6000 [0x6001]. Bus 0, device 9, function 0: VGA compatible controller: Avance ALG-2302 (rev 0). Medium devsel. Fast back-to-back capable. IRQ 11. Non-prefetchable 32 bit memory at 0xfc000000 [0xfc000000]. Kann man im Bios dazu was schrauben? (Award Bios) Woran kann das liegen? N8 Uli -- ___________________________ Disclaimer: The opinions expressed here are not those of my employer, my wife, my church, or myself... But they are the opinions of Elvis as revealed to me through the medium of my pet hamster, Lee Harvey Oswald... Sent through GMX FreeMail - http://www.gmx.net