Mailinglist Archive: opensuse-isdn-de (197 mails)
| < Previous | Next > |
RE: [suse-isdn] Re: Nur Einmalverbindung möglich?
- From: Harald Deobald <hdeosp@xxxxxx>
- Date: Wed, 1 Nov 2000 03:40:53 +0000 (UTC)
- Message-id: <00103123540900.01033@harald>
Am Tue, 31 Oct 2000 schrieb Martin Hofgesang:
>
>
>Nachher:
>
>root@hofgesang:/home/martin > ifconfig
>eth0 Link encap:Ethernet HWaddr 00:50:04:37:39:D6
> inet addr:192.168.0.99 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6729 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7815 errors:0 dropped:0 overruns:0 carrier:0
> collisions:32 txqueuelen:100
> Interrupt:11 Base address:0xfc80
>
>ippp0 Link encap:Point-to-Point Protocol
> inet addr:192.168.0.99 P-t-P:192.168.0.1 Mask:255.255.255.255
> UP POINTOPOINT RUNNING NOARP DYNAMIC MTU:1500 Metric:1
> RX packets:11067 errors:0 dropped:0 overruns:0 frame:0
> TX packets:12215 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:30
>
>lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:5084 errors:0 dropped:0 overruns:0 frame:0
> TX packets:5084 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
>root@hofgesang:/home/martin > netstat -nr
>Kernel IP routing table
>Destination Gateway Genmask Flags MSS Window irtt
>Iface
>192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
>ippp0
>192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
>ippp0
>192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
>eth0
>127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
>0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0
>ippp0
>root@hofgesang:/home/martin >
>
Hallo Martin,
gehe mal mit yast in das Konfigurationsmenue (Netzwerk-Konfiguration) des
ippp0-devices, stelle im Untermenue IP-Adresse die Adresse des
point-to-point-Partners auf eine Adresse, die nicht im lokalen Netz liegt (z.B.
192.168.10.1) und dieselbe Adresse auch als default-Gateway-Adresse ein.
>
>Nur schlau werde ich da leider nicht draus :-((
>Danke schonmal für die Antworten!
>
>Martin
>
--
Gruß, Harald
>
>
>Nachher:
>
>root@hofgesang:/home/martin > ifconfig
>eth0 Link encap:Ethernet HWaddr 00:50:04:37:39:D6
> inet addr:192.168.0.99 Bcast:192.168.0.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:6729 errors:0 dropped:0 overruns:0 frame:0
> TX packets:7815 errors:0 dropped:0 overruns:0 carrier:0
> collisions:32 txqueuelen:100
> Interrupt:11 Base address:0xfc80
>
>ippp0 Link encap:Point-to-Point Protocol
> inet addr:192.168.0.99 P-t-P:192.168.0.1 Mask:255.255.255.255
> UP POINTOPOINT RUNNING NOARP DYNAMIC MTU:1500 Metric:1
> RX packets:11067 errors:0 dropped:0 overruns:0 frame:0
> TX packets:12215 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:30
>
>lo Link encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:3924 Metric:1
> RX packets:5084 errors:0 dropped:0 overruns:0 frame:0
> TX packets:5084 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
>
>root@hofgesang:/home/martin > netstat -nr
>Kernel IP routing table
>Destination Gateway Genmask Flags MSS Window irtt
>Iface
>192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
>ippp0
>192.168.0.1 0.0.0.0 255.255.255.255 UH 0 0 0
>ippp0
>192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0
>eth0
>127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
>0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0
>ippp0
>root@hofgesang:/home/martin >
>
Hallo Martin,
gehe mal mit yast in das Konfigurationsmenue (Netzwerk-Konfiguration) des
ippp0-devices, stelle im Untermenue IP-Adresse die Adresse des
point-to-point-Partners auf eine Adresse, die nicht im lokalen Netz liegt (z.B.
192.168.10.1) und dieselbe Adresse auch als default-Gateway-Adresse ein.
>
>Nur schlau werde ich da leider nicht draus :-((
>Danke schonmal für die Antworten!
>
>Martin
>
--
Gruß, Harald
| < Previous | Next > |