On 07/26/2011 10:57 AM, Fabien Chaudier wrote:
Le mardi 26 juillet 2011 10:48:23, Bruno Friedmann a écrit :
On 07/26/2011 08:14 AM, Fabien Chaudier wrote:
je charge le module : modprobe aacraid Dans /var/log/messages j'ai une ligne : Jul 26 08:08:08 pc406-66 kernel: [ 721.900828] Adaptec aacraid driver 1.1-5[26400]-ms
La commande lspci -vvv 01:00.0 RAID bus controller: Adaptec Device 028b (rev 01)
Subsystem: Adaptec Device 0300 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [70] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <1us, L1 <8us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis+ DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -3.5dB
Capabilities: [ac] MSI-X: Enable- Count=16 Masked-
Vector table: BAR=0 offset=001c2000 PBA: BAR=0 offset=001c4000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
La commande modinfo aacraid donne : filename: /lib/modules/2.6.37.6-0.5-default/kernel/drivers/scsi/aacraid/aacraid.ko version: 1.1-5[26400]-ms license: GPL description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver author: Red Hat Inc and Adaptec srcversion: D19601350A4C79E4B7DF3C4 alias: pci:v00009005d00000288sv*sd*bc*sc*i* alias: pci:v00009005d00000286sv*sd*bc*sc*i* alias: pci:v00009005d00000285sv*sd*bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd*bc*sc*i* alias: pci:v00009005d00000285sv00001028sd*bc*sc*i* alias: pci:v00001011d00000046sv0000103Csd000010C2bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00001364bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00000364bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00000365bc*sc*i* alias: pci:v00009005d00000285sv00001028sd00000287bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A2bc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000029Abc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000299bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000298bc*sc*i* alias: pci:v00009005d00000286sv00001014sd00009540bc*sc*i* alias: pci:v00009005d00000286sv00001014sd00009580bc*sc*i* alias: pci:v00009005d00000285sv00001014sd00000312bc*sc*i* alias: pci:v00009005d00000285sv00001014sd000002F2bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000297bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000296bc*sc*i* alias: pci:v00009005d00000285sv0000103Csd00003227bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000294bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000293bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000292bc*sc*i* alias: pci:v00009005d00000285sv00001028sd00000291bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000290bc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Fbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Ebc*sc*i* alias: pci:v00009005d00000286sv00009005sd00000800bc*sc*i* alias: pci:v00009005d00000200sv00009005sd00000200bc*sc*i* alias: pci:v00009005d00000287sv00009005sd00000800bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A6bc*sc*i* alias: pci:v00009005d00000285sv00009005sd000002A5bc*sc*i* alias: pci:v00009005d00000285sv00009005sd000002A4bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A3bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A1bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A0bc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Fbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Ebc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Dbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Cbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Bbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Cbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Bbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Abc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000289bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000288bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd00000287bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd00000286bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000287bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000285bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000286bc*sc*i* alias: pci:v00009005d00000284sv00009005sd00000284bc*sc*i* alias: pci:v00009005d00000283sv00009005sd00000283bc*sc*i* alias: pci:v00001028d0000000Asv00001028sd00000121bc*sc*i* alias: pci:v00001028d0000000Asv00001028sd0000011Bbc*sc*i* alias: pci:v00001028d0000000Asv00001028sd00000106bc*sc*i* alias: pci:v00001028d00000002sv00001028sd000000D9bc*sc*i* alias: pci:v00001028d00000002sv00001028sd000000D1bc*sc*i* alias: pci:v00001028d00000004sv00001028sd000000D0bc*sc*i* alias: pci:v00001028d00000003sv00001028sd00000003bc*sc*i* alias: pci:v00001028d00000002sv00001028sd00000002bc*sc*i* alias: pci:v00001028d00000001sv00001028sd00000001bc*sc*i* depends: vermagic: 2.6.37.6-0.5-default SMP mod_unload modversions parm: nondasd:Control scanning of hba for nondasd devices. 0=off, 1=on (int)
parm: cache:Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery is protecting Cache (int)
parm: dacmode:Control whether dma addressing is using 64 bit DAC. 0=off, 1=on (int) parm: commit:Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays. This is typically needed in systems that do not have a BIOS. 0=off, 1=on (int) parm: msi:IRQ handling. 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI) (int) parm: startup_timeout:The duration of time in seconds to wait for adapter to have it's kernel up and running. This is typically adjusted for large systems that do not have a BIOS. (int) parm: aif_timeout:The duration of time in seconds to wait for applications to pick up AIFs before deregistering them. This is typically adjusted for heavily burdened systems. (int) parm: numacb:Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware. (int) parm: acbsize:Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware. (int) parm: update_interval:Interval in seconds between time sync updates issued to adapter. (int) parm: check_interval:Interval in seconds between adapter health checks. (int) parm: check_reset:If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it. (int) parm: expose_physicals:Expose physical components of the arrays. -1=protect 0=off, 1=on (int) parm: reset_devices:Force an adapter reset at initialization. (int)
parm: wwn:Select a WWN type for the arrays: 0 - Disable 1 - Array Meta Data Signature (default) 2 - Adapter Serial Number (int)
Voila :-)
Le lundi 25 juillet 2011 21:08:39, Bruno Friedmann a écrit :
Elle devrait passer sans souci. Toutefois attention sur les cartes mère type graille taiwan pour desktop.
La carte adaptec est exigeante en terme de voltage et d'emplacement pcie
J'ai eu le cas d'incompatibilité (le proco de la carte adaptec frisait les 108°) sur une carte mère asus et la même carte sur du gigabyte amd 62° :D
Fabien pourrais-tu me donner la ligne lspci -vvv de l'adaptec ? et comparer avec un modinfo aacraid pour voir si la carte est supportée.
Par rapport à ton souci, lorsque tu fais un modprobe aacraid, est-ce que dmesg t'indique un succès une erreur ? normalement après l'insertion réussi du module, tu devrais voir apparaitre le disque.
Maintenant c'est quoi la capacité de ton raid1, si tu vais plus que 2Tb il faut peut-être faire du GPT mais normalement le contrôleur fait ça tout seul ... (c'est pas encore gagner avec grub legacy après :-)
modinfo sur kernel 3.0.0-2 modinfo aacraid filename: /lib/modules/3.0.0-2-desktop/kernel/drivers/scsi/aacraid/aacraid.ko version: 1.1-7[28000]-ms license: GPL description: Dell PERC2, 2/Si, 3/Si, 3/Di, Adaptec Advanced Raid Products, HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver author: Red Hat Inc and Adaptec srcversion: FB3332EFDBAF0592084355D alias: pci:v00009005d0000028Bsv*sd*bc*sc*i* alias: pci:v00009005d00000288sv*sd*bc*sc*i* alias: pci:v00009005d00000286sv*sd*bc*sc*i* alias: pci:v00009005d00000285sv*sd*bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd*bc*sc*i* alias: pci:v00009005d00000285sv00001028sd*bc*sc*i* alias: pci:v00001011d00000046sv0000103Csd000010C2bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00001364bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00000364bc*sc*i* alias: pci:v00001011d00000046sv00009005sd00000365bc*sc*i* alias: pci:v00009005d00000285sv00001028sd00000287bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A2bc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000029Abc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000299bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000298bc*sc*i* alias: pci:v00009005d00000286sv00001014sd00009540bc*sc*i* alias: pci:v00009005d00000286sv00001014sd00009580bc*sc*i* alias: pci:v00009005d00000285sv00001014sd00000312bc*sc*i* alias: pci:v00009005d00000285sv00001014sd000002F2bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000297bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000296bc*sc*i* alias: pci:v00009005d00000285sv0000103Csd00003227bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000294bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000293bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000292bc*sc*i* alias: pci:v00009005d00000285sv00001028sd00000291bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000290bc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Fbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Ebc*sc*i* alias: pci:v00009005d00000286sv00009005sd00000800bc*sc*i* alias: pci:v00009005d00000200sv00009005sd00000200bc*sc*i* alias: pci:v00009005d00000287sv00009005sd00000800bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A6bc*sc*i* alias: pci:v00009005d00000285sv00009005sd000002A5bc*sc*i* alias: pci:v00009005d00000285sv00009005sd000002A4bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A3bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A1bc*sc*i* alias: pci:v00009005d00000286sv00009005sd000002A0bc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Fbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Ebc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Dbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Cbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000029Bbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Dbc*sc*i* alias: pci:v00009005d00000286sv00009005sd0000028Cbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Bbc*sc*i* alias: pci:v00009005d00000285sv00009005sd0000028Abc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000289bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000288bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd00000287bc*sc*i* alias: pci:v00009005d00000285sv000017AAsd00000286bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000287bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000285bc*sc*i* alias: pci:v00009005d00000285sv00009005sd00000286bc*sc*i* alias: pci:v00009005d00000284sv00009005sd00000284bc*sc*i* alias: pci:v00009005d00000283sv00009005sd00000283bc*sc*i* alias: pci:v00001028d0000000Asv00001028sd00000121bc*sc*i* alias: pci:v00001028d0000000Asv00001028sd0000011Bbc*sc*i* alias: pci:v00001028d0000000Asv00001028sd00000106bc*sc*i* alias: pci:v00001028d00000002sv00001028sd000000D9bc*sc*i* alias: pci:v00001028d00000002sv00001028sd000000D1bc*sc*i* alias: pci:v00001028d00000004sv00001028sd000000D0bc*sc*i* alias: pci:v00001028d00000003sv00001028sd00000003bc*sc*i* alias: pci:v00001028d00000002sv00001028sd00000002bc*sc*i* alias: pci:v00001028d00000001sv00001028sd00000001bc*sc*i* depends: vermagic: 3.0.0-2-desktop SMP preempt mod_unload modversions parm: nondasd:Control scanning of hba for nondasd devices. 0=off,
1=on (int) parm: cache:Disable Queue Flush commands: bit 0 - Disable FUA in WRITE SCSI commands bit 1 - Disable SYNCHRONIZE_CACHE SCSI command bit 2 - Disable only if Battery is protecting Cache (int)
parm: dacmode:Control whether dma addressing is using 64 bit DAC. 0=off, 1=on (int) parm: commit:Control whether a COMMIT_CONFIG is issued to the adapter for foreign arrays. This is typically needed in systems that do not have a BIOS. 0=off, 1=on (int) parm: msi:IRQ handling. 0=PIC(default), 1=MSI, 2=MSI-X(unsupported, uses MSI) (int) parm: startup_timeout:The duration of time in seconds to wait for adapter to have it's kernel up and running. This is typically adjusted for large systems that do not have a BIOS. (int) parm: aif_timeout:The duration of time in seconds to wait for applications to pick up AIFs before deregistering them. This is typically adjusted for heavily burdened systems. (int) parm: numacb:Request a limit to the number of adapter control blocks (FIB) allocated. Valid values are 512 and down. Default is to use suggestion from Firmware. (int) parm: acbsize:Request a specific adapter control block (FIB) size. Valid values are 512, 2048, 4096 and 8192. Default is to use suggestion from Firmware. (int) parm: update_interval:Interval in seconds between time sync updates issued to adapter. (int) parm: check_interval:Interval in seconds between adapter health checks. (int) parm: check_reset:If adapter fails health check, reset the adapter. a value of -1 forces the reset to adapters programmed to ignore it. (int) parm: expose_physicals:Expose physical components of the arrays. -1=protect 0=off, 1=on (int) parm: reset_devices:Force an adapter reset at initialization. (int) parm: wwn:Select a WWN
type for the arrays: 0 - Disable 1 - Array Meta Data Signature (default) 2 - Adapter Serial Number (int)
On 07/25/2011 08:30 PM, Fabien CHAUDIER wrote:
D'apres vous, la carte devrait normalement être reconnue malgrès qu'elle soit récente.
J'utilise la 11.4-x86_64. J'ai crée un array (deux disque en RAID1) et lorsque je fais l'installation en mode texte, je suis obligé de spécifier le module aacraid. La commande lsmod montre le module chargé mais pas de disque sda. Pas de message d'erreur sur tty10 La carte mere est une Gigabyte, modele GA-EX58-EXTREME (rev. 1.0).
> Mouais surtout que normalement aacraid le driver adaptec est super > bien tenu dans le kernel pas lancer en automatique ? > pb de carte-mère ou d'emplacement sur le bus pcie > > J'ai plusieurs installation qui tourne avec d'ancien controleur > (jusqu'au 58xx) et j'ai jamais vu de soucis avec ce type de matos. > > On 07/25/2011 08:09 PM, Julien DAL wrote: >> Salut, >> >> Tu ne précises pas la version d'Opensuse que tu utilises. >> >> Peux-tu nous préciser cela ? >> >> Merci >> >> XKomodor >> >> Le 25/07/2011 19:29, Fabien CHAUDIER a écrit : >>> Bonjour, >>> >>> J'ai voulu installer une carte controleur RAID de chez >>> Adpatec,modele 6405, >>> http://www.adaptec.com/en-us/support/raid/sas_raid/sas-6405/ et pas >>> de chance la carte n'est pas reconnu. J'ai fait une installation en >>> mode texte ou il est possible de charger le module aacraid pour se >>> genre de carte mais rien n'y fait. >>> Sur le site Adaptec il y a bien un lien qui pointe vers deux type >>> de "Linux Driver Source Code Downloads" >>> Le premier est Driver Source RPM v1.1.7-28000 for Linux. >>> Le second est Dynamic Kernel Module Source Code Support >>> >>> A partir de l'un de ces deux lien est il possible de générer un >>> support pour une fresh install ? >>> Je m'explique. Lorsqu'on amorce depuis le DVD, lors du choix de la >>> langue, de la résolution et du support d'installation, il est >>> possible de spécifier à partir de "F6 Driver" un chemin pour le/les >>> drivers du matériels non reconnus. Ma question est comment réalise >>> cette source d'installation de pilotes additionnel ? >>> >>> Si quelqu'un à déjà résolu se genre de problème, je suis proneur. >>> >>> Merci d'avance.
Si tu n'as qu'une seule ligne dans dmesg c'est pas bon du tout ... Voici par exemple une carte avec 8 disques, assemblés en raid.
[ 1.280924] Adaptec aacraid driver 1.1-5[24702]-ms [ 1.282400] aacraid 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.283593] aacraid 0000:02:00.0: setting latency timer to 64 [ 1.348539] IRQ 18/aacraid: IRQF_DISABLED is not guaranteed on shared IRQs [ 1.560343] AAC0: kernel 5.2-0[18252] Nov 22 2010 [ 1.561686] AAC0: monitor 5.2-0[18252] [ 1.562947] AAC0: bios 5.2-0[18252] [ 1.564724] AAC0: serial 0A111151485 [ 1.566014] AAC0: Non-DASD support enabled. [ 1.567327] AAC0: 64bit support enabled. [ 1.569157] AAC0: 64 Bit DAC enabled [ 1.577756] scsi0 : aacraid [ 1.579532] scsi 0:0:0:0: Direct-Access Adaptec ARRAY0-R6 V1.0 PQ: 0 ANSI: 2 [ 1.587291] scsi 0:1:0:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.589078] scsi 0:1:1:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.591109] scsi 0:1:2:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.592894] scsi 0:1:3:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.594582] scsi 0:1:4:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.596230] scsi 0:1:5:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.597848] scsi 0:1:6:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5 [ 1.599448] scsi 0:1:7:0: Direct-Access WDC WD3000HLFS-0 04.0 PQ: 1 ANSI: 5
Pour en être certain un lspci -vvnnk
donnera les identifiants et le driver associé Si tu peux pour le controleur adaptec Résultat de la commande lspci -vvnn : 01:00.0 RAID bus controller [0104]: Adaptec Device [9005:028b] (rev 01) Subsystem: Adaptec Device [9005:0300] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
Rien de plus... :-( Les disques font 320Go chacun
Ok ces cartes sont supportés avec le module 1.1.7 présent dans le kernel 3.0 où j'ai effectivement cette version du aacraid (la même qu'on peut télécharger chez adpatec) Je regarde plus tard comment l'avoir à l'install de la 11.4 Par hazard, t'aurais pas envie d'installer le système sur une autre paire de disque ? -- Bruno Friedmann Ioda-Net Sàrl www.ioda-net.ch openSUSE Member & Ambassador GPG KEY : D5C9B751C4653227 irc: tigerfoot -- To unsubscribe, e-mail: opensuse-fr+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-fr+help@opensuse.org