Am Donnerstag, 2. März 2017, 08:50:18 CET schrieb opensuse@maridonkers.info:
Pressing CTRL-ALT-F# doesn't switch virtual console anymore. Nothing happens, although the cursor disappears, so under the hood it may have switched but the GUI doesn't switch.
I can confirm the issue. System freezes - or at least appears to when switching to tty1. Needs a hard reboot in that case I use Plasma5 with OpenGL 3.0 , generally the performance seems to get worse in the last few snapshots I have constantly microfreezes for a few seconds in nearly everything I do with the system. Output hwinfo. 20: PCI 100.0: 0300 VGA compatible controller (VGA) [Created at pci.378] Unique ID: VCu0.1dFQ0OPZpl3 Parent ID: vSkL.X8+35FiqonC SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.0 SysFS BusID: 0000:01:00.0 Hardware Class: graphics card Model: "Dell Radeon HD 6350" Vendor: pci 0x1002 "ATI Technologies Inc" Device: pci 0x68f9 "Cedar [Radeon HD 5000/6000/7350/8350 Series]" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x2126 "Radeon HD 6350" Driver: "radeon" Driver Modules: "drm" Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable) Memory Range: 0xe1420000-0xe143ffff (rw,non-prefetchable) I/O Ports: 0x3000-0x30ff (rw) Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled) IRQ: 27 (147641 events) I/O Port: 0x00 (rw) Module Alias: "pci:v00001002d000068F9sv00001028sd00002126bc03sc00i00" Driver Info #0: Driver Status: radeon is active Driver Activation Cmd: "modprobe radeon" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge) Primary display adapter: #20 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org