Just had a blackout and of one of the computers the UPS did not do its work. After the electricity was back again the system hangs some where. and seems to recover without result. The last info is repeated as long as I keep the machine running. Blaming the electricity fellers is perhaps not correct :) Could be of course something else but I have no clue. The produced information is not very clear to me. Perhaps somebody else could translate this into plain English (or Dutch :) ). The problem seems to start after the machine finds the USB camera. ------- Product USB 2.0 PC CAMERA Manufactor ARKMICRO random: non blocking pool is initialized ata 3 : lost interrupt (status 0x50) ata 3.00: exception E mask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata 3.00: failed command : READ DMA ata 3.00: cmd c8/00 etc etc....... tag dma 28672 in res 40/00 etc etc.........Emask 0x4 (time out) ata 3.00: status {DRDY} ata 3.00: soft resetting link ata 3.00: configured for UDMA/130 ata 3.01: configured for UDMA/ 100 ata 3.00: device reported invalid CHS sector o ata 3.00: EH complete ata 3: lost interrupt etc. etc ---------- The machine affected by this problem runs KDE Tumbleweed updated (20150807) and has a 586 processor and kernel 4.1.3-2-desktop. -- Linux User 183145 using KDE4 and LXDE on a Pentium IV , powered by openSUSE 20150807 (x86_64) Kernel: 4.1.3-2-desktop KDE Development Platform: 4.14.10 14:36pm up 0:55, 2 users, load average: 0.73, 0.50, 0.43 -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org