-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 12/16/2012 01:54 PM, Felix Miata wrote:
# mount /dev/sda4 /mnt mount: special device /dev/sda4 does not exist
[ because do not feel sufficiently 'advanced' to wrestle with bugzilla reports, since kernel 3.4.6-2.10 i have been hoping this trouble would be solved and 'go away', but, no such luck ]
Are you sure the newer kernel didn't change device names? Booted to newer kernel, what is output from:
Guys, the error is that the kernel cannot read partition table on his system (I got this from him some time ago): [ 1.844645] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6^M [ 1.844784] ata1.01: BMDMA stat 0x44^M [ 1.844858] ata1.01: failed command: READ DMA^M [ 1.844942] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in^M [ 1.844942] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)^M [ 1.845230] ata1.01: status: { DRDY ERR }^M [ 1.845305] ata1.01: error: { ICRC ABRT }^M [ 1.845403] ata1: soft resetting link^M [ 2.128603] ata1.01: configured for UDMA/33^M [ 2.128610] sd 0:0:1:0: [sda] ^M [ 2.128612] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE^M [ 2.128614] sd 0:0:1:0: [sda] ^M [ 0.907216] ACPI: Invalid Power Resource to register!^M [ 2.128616] Sense Key : Aborted Command [current] [descriptor]^M [ 2.128619] Descriptor sense data with sense descriptors (in hex):^M [ 2.128621] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 ^M [ 2.128631] 00 00 00 00 ^M [ 2.128635] sd 0:0:1:0: [sda] ^M [ 2.128638] Add. Sense: Scsi parity error^M [ 2.128641] sd 0:0:1:0: [sda] CDB: ^M [ 2.128642] Read(10): 28 00 00 00 00 00 00 00 08 00^M [ 2.128651] end_request: I/O error, dev sda, sector 0^M [ 2.128763] Buffer I/O error on device sda, logical block 0^M [ 2.128874] ata1: EH complete^M [ 3.068332] ata1.01: limiting speed to UDMA/25:PIO4^M [ 3.068335] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6^M [ 3.068471] ata1.01: BMDMA stat 0x44^M [ 3.068546] ata1.01: failed command: READ DMA^M [ 3.068629] ata1.01: cmd c8/00:08:00:00:00/00:00:00:00:00/f0 tag 0 dma 4096 in^M [ 3.068629] res 51/84:00:00:00:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)^M [ 3.068904] ata1.01: status: { DRDY ERR }^M [ 3.068979] ata1.01: error: { ICRC ABRT }^M [ 3.069083] ata1: soft resetting link^M [ 3.352292] ata1.01: configured for UDMA/25^M [ 3.352298] sd 0:0:1:0: [sda] ^M [ 3.352300] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE^M [ 3.352302] sd 0:0:1:0: [sda] ^M [ 3.352303] Sense Key : Aborted Command [current] [descriptor]^M [ 3.352306] Descriptor sense data with sense descriptors (in hex):^M [ 3.352308] 72 0b 47 00 00 00 00 0c 00 0a 80 00 00 00 00 00 ^M [ 3.352317] 00 00 00 00 ^M [ 3.352322] sd 0:0:1:0: [sda] ^M [ 3.352324] Add. Sense: Scsi parity error^M [ 3.352327] sd 0:0:1:0: [sda] CDB: ^M [ 3.352328] Read(10): 28 00 00 00 00 00 00 00 08 00^M [ 3.352336] end_request: I/O error, dev sda, sector 0^M [ 3.352448] Buffer I/O error on device sda, logical block 0^M [ 3.352555] ata1: EH complete^M [ 3.400372] ldm_validate_partition_table(): Disk read failed.^M [ 3.400764] sda: unable to read partition table^M - -- js suse labs -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.19 (GNU/Linux) Comment: Using GnuPG with undefined - http://www.enigmail.net/ iQIcBAEBAgAGBQJQ0EtjAAoJEL0lsQQGtHBJTQIQAJIiMpw+vB+AyoTjooKo1ZQw 22jCCQnYdEBqX/qwSyv/7r04hHpLvIbQkSx6tM4yZDNkgGHfUHhQP70aOOclyGc4 Ugrcx7m7Sio/nKTF8lG92jJ897QNhBCBPpnhAflJmawghn5cA1mWEui1r96GcXo/ tKzYVDvH9MWAKuCpEk2y9fe43MRidvCnwCNzbs3wzu+rscox188ZN3AKt6TDPo8i T1lISY/IRRSUnKZ/u5/Z4GcxnpUZIw7cc2XkBGNBuRPObrU9/WavrXUeEF4/6c+L PKFnx90xopSPhTGNhd6DhE/DuIRRnHu7Q94PYAfHcb5hAVuDM+gmgCFnJ23VjrTR 99dkQzIxKXng0bUf3W2Toi9zAutn5WwETqRzkvBy3bOMpOmUykE81BOxTpvkcDV1 tPWJGTgz3m8tSV20OeBacfuRUdYrMTIg8HKxYDgsnvOfQTVXOqgUhVkh8exZRHnS LMpIri3GFT/0B3Avh6N2dq0Jb47dL2Nyz2U6BYnT0a0au58Rsm1adGoG5baHslrS SfyLjqgXHlBjJUPAH4stXKJJ46SSmrzHfPqgo4A6RlzFx2MtvpNlrprFh6y2nVQ8 Ob0rp/28a63yUKt+taCJrpPK9CgHV1aWwqJU7ZIUplj0xDKu6gBeGTl+nMDem0JT NPvrhhk4IW7eySxcUs+C =FOKP -----END PGP SIGNATURE----- -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org To contact the owner, e-mail: opensuse-factory+owner@opensuse.org