Mailinglist Archive: opensuse-factory (368 mails)

< Previous Next >
Re: [opensuse-factory] kernel 3.2.0-1 won't boot
Hi,

I had the same problem and it had to do with an intel option: give the kernel
intel_iommu=off as parameter and it magically works again (or so it did at
least for me). See bug report
<https://bugzilla.novell.com/show_bug.cgi?id=742293>

Greetings,
Erwin


On Friday 20 January 2012 15:22:56 Patrick Shanahan wrote:
12.1 tumbleweed

kernel 3.2.0-1 doesn't recognize my ssd drive attached to sata-6:

62: IDE 700.0: 10600 Disk
[Created at block.245]
Unique ID: _kuT.WYth+nlyWIB
Parent ID: B35A.PyUo2wo_KU7
SysFS ID: /class/block/sdc
SysFS BusID: 7:0:0:0
SysFS Device Link:
/devices/pci0000:00/0000:00:02.0/0000:02:00.0/host7/target7:0:0/7:0:0:0
Hardware Class: disk
Model: "INTEL SSDSC2MH12"
Vendor: "INTEL"
Device: "SSDSC2MH12"
Revision: "PPG2"
Serial ID: "LNEL107600VA120CGN"
Driver: "ahci", "sd"
Driver Modules: "ahci"
Device File: /dev/sdc
Device Files: /dev/sdc,
/dev/disk/by-id/ata-INTEL_SSDSC2MH120A2_LNEL107600VA120CGN,
//dev/disk/by-id/scsi-SATA_INTEL_SSDSC2MH1LNEL107600VA120CGN,
///dev/disk/by-path/pci-0000:02:00.0-scsi-1:0:0:0
Device Number: block 8:32-8:47
BIOS id: 0x80
Geometry (Logical): CHS 14593/255/63
Size: 234441648 sectors a 512 bytes
Capacity: 111 GB (120034123776 bytes)
Geometry (BIOS Legacy): CHS 1024/255/63
Config Status: cfg=yes, avail=yes, need=no, active=unknown
Attached to: #32 (SATA controller)



kernel-desktop-3.2.1-3.1.x86_64
has same problem

bugzilla #740679
https://bugzilla.novell.com/show_bug.cgi?id=740679
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
To contact the owner, e-mail: opensuse-factory+owner@xxxxxxxxxxxx

< Previous Next >
Follow Ups
References