Mailinglist Archive: opensuse-factory (798 mails)
| < Previous | Next > |
Re: [opensuse-factory] I can't burn the factory DVD, too big!
- From: "Carlos E. R." <robin.listas@xxxxxxxxxxxxxx>
- Date: Wed, 09 Feb 2011 17:07:21 +0100
- Message-id: <4D52BBB9.9020906@telefonica.net>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 2011-02-09 16:49, Joerg Schilling wrote:
Not entirely correct.
I tried burning a CD image to that same DVD media, and wodim burns it happily.
Quemando, paciencia
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
limits.scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22LS50 '
Revision : 'TL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 693 MB
Total size: 795 MB (78:50.88) = 354816 sectors
Lout start: 796 MB (78:52/66) = 354816 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
wodim: WARNING: Data may not fit on standard 74min disk.
Speed set to 5540 KB/s
Starting to write CD/DVD at speed 4.0 in real unknown mode for single
session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 02: 401 of 693 MB written (fifo 100%) [buf 97%] 4.1x.
...
Track 02: 693 of 693 MB written (fifo 100%) [buf 100%] 4.3x.
Track 02: Total bytes read/written: 726663168/726663168 (354816 sectors).
Writing time: 131.750s
Average write speed 4.0x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 10.374s
wodim: fifo had 11446 puts and 11446 gets.
wodim: fifo was 0 times empty and 6446 times full, min fill was 75%.
Although the burn is bad, it is unreadable. Perhaps because I burnt a CD to
a DVD.
- --
Cheers / Saludos,
Carlos E. R.
(from 11.2 x86_64 "Emerald" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAk1Su7kACgkQtTMYHG2NR9Wj3QCeIid5pd1pzYpeSalZI2747GRZ
2FgAoITz5UH1L9vwbMOawNtb68P6i+j5
=scYV
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
Hash: SHA1
On 2011-02-09 16:49, Joerg Schilling wrote:
Mike <> wrote:
wodim does not retrive size information, so wodim cannot know whether
your specific medium could have sufficient free space.
Not entirely correct.
I tried burning a CD image to that same DVD media, and wodim burns it happily.
Quemando, paciencia
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK
limits.scsidev: '/dev/dvd'
devname: '/dev/dvd'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 5
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identification : 'DVDRAM GH22LS50 '
Revision : 'TL01'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001A (DVD+RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW) (current)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1048576 = 1024 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 17203 kB/s 97x CD 12x DVD
FIFO size : 4194304 = 4096 KB
Track 01: data 693 MB
Total size: 795 MB (78:50.88) = 354816 sectors
Lout start: 796 MB (78:52/66) = 354816 sectors
Current Secsize: 2048
HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
wodim: WARNING: Data may not fit on standard 74min disk.
Speed set to 5540 KB/s
Starting to write CD/DVD at speed 4.0 in real unknown mode for single
session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 02: 401 of 693 MB written (fifo 100%) [buf 97%] 4.1x.
...
Track 02: 693 of 693 MB written (fifo 100%) [buf 100%] 4.3x.
Track 02: Total bytes read/written: 726663168/726663168 (354816 sectors).
Writing time: 131.750s
Average write speed 4.0x.
Min drive buffer fill was 95%
Fixating...
Fixating time: 10.374s
wodim: fifo had 11446 puts and 11446 gets.
wodim: fifo was 0 times empty and 6446 times full, min fill was 75%.
Although the burn is bad, it is unreadable. Perhaps because I burnt a CD to
a DVD.
- --
Cheers / Saludos,
Carlos E. R.
(from 11.2 x86_64 "Emerald" at Telcontar)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.12 (GNU/Linux)
Comment: Using GnuPG with SUSE - http://enigmail.mozdev.org/
iEYEARECAAYFAk1Su7kACgkQtTMYHG2NR9Wj3QCeIid5pd1pzYpeSalZI2747GRZ
2FgAoITz5UH1L9vwbMOawNtb68P6i+j5
=scYV
-----END PGP SIGNATURE-----
--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
| < Previous | Next > |