Hello, I installed OPENSUSE 11.3 RC1 x86_64 successfully on a DELL precision T1500 RAID system. After upgrading to RC2 with "zypper ref && zypper dup" the system does not boot anymore. The error messages are: RAID set isw_bacaiaeaja_Volume0 was activated The dynamic shared library "libdmraid-events-isw.so" could not be loaded: libdmraid-events-isw.so: cannot open shared object file: No such file or directory Trying manual resume from /dev/mapper/isw_bacaiaeaja_Volume0_part6 resume device /dev/mapper/isw_bacaiaeaja_Volume0_part6 not found (ignoring) Trying manual resume from /dev/mapper/isw_bacaiaeaja_Volume0_part6 resume device /dev/mapper/isw_bacaiaeaja_Volume0_part6 not found (ignoring) Waiting for device /dev/mapper/isw_bacaiaeaja_Volume0_part7 to appear ....... Could not find /dev/mapper/isw_bacaiaeaja_Volume0_part7. Want me to fall back to /dev/mapper/isw_bacaiaeaja_Volume0_part7? (Y/n) part5 is /boot part6 is swap part7 is / part8 is /home It appears that / is not mounted properly. Is this a known regression from RC1? Regards, Otmar Stahl -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org