Hi, I wanted to install M3 on x86_64 system, with has 4 disks with raid-1 (boot) and raid-5 partitions (root, and home partitions) on it, and one separate disk. I want to install M3 on that separate disk, without touching the raids. The install procedure leads me wel to that goal, but when I am to actually install the chosen setup, I get a message saying Unsupported combination of hardware platform x86_64 and bootloader grub. I don't want to risk damaging the raidsetup (although I have actual backup's), so I wonder what's gonna happen if I do install this setup. Anyone any idea? Thanks, Jogchum Below the whole screen (in Dutch): Installatie-instellingen Klik een onderdeel om deze te wijzigen, of gebruik het menu "Wijzigen " onderin het venster *Partitionering* . Partitie /dev/sde2 (l 06 GB) voor /boot formatteren met ext2 . Partitie /dev/sde3 (50 18 GB) voor / formatteren met ext4 . /dev/sdel gebruiken als swap . Aankoppelpunt van /dev/sde4 instellen op /home *Opstarten* Niet ondersteunde combinatie van hardwareplatvorm x86_64 en bootloader grub . Type bootloader GRUB . Status locatie /dev/sde2 ("/boot") . Wijzig locatie * Opstarten vanaf MBR is uitgeschakeld (inschakelen)) * Opstarten vanaf /boot-partitie is ingeschakeld (uitschakelen)) . Secties + openSUSE (standaard) + openSUSE (/dev/sdal) + Desktop openSUSE 11 2 - 2 6.31.5-0.1 (/dev/sdbl) + Desktop - openSUSE 11 2 - 2.6.31.5-0 l (/dev/sdcl) + Diskette + Veilige modus -- openSUSE . Volgorde van harde schijven: /dev/sde. /dev/sda, /dev/sdc, /dev/sdb, /dev/sdd Software . Product: openSUSE . Systeemtype KDE-desktop . Patronen + Base System + Enhanced Base System\ + Novell AppArmor + YaST System Administration + YaST Installation Packages + Software Management + Tests for the Update Stack + KDE4 Desktop Environment -- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org