Mailinglist Archive: opensuse-factory (600 mails)

[James PEARSON <pearson44j@xxxxxxxxxx>]

On Fri, 02 Oct 2009 10:04:45 +1000
<doiggl@xxxxxxxxxxxxxxxxxx> wrote:

> Perhaps you can try a cli utility called wodim. which is CLI based CD/DVD
> burning program.
> Cheers Glenn
>
> example
> # wodim --devices                                                          
>     
> wodim: Overview of accessible drives (1 found) :                           
>     
> -------------------------------------------------------------------------  
>     
>  0  dev='/dev/hda'      rwrw-- : 'ATAPI' 'DVD A  DH20A4P'                  
>     
> -------------------------------------------------------------------------  
>      
> # wodim -v -dao dev=/dev/hda  driveropts=burnfree whatever.iso
> TOC Type: 1 = CD-ROM                                                       
>     
> scsidev: '/dev/hda'                                                        
>     
> devname: '/dev/hda'                                                        
>     
> scsibus: -2 target: -2 lun: -2                                             
>     
> Linux sg driver version: 3.5.27                                            
>     
> Wodim version: 1.1.8                                                       
>     
> Driveropts: 'burnfree'
> SCSI buffer size: 64512
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'ATAPI   '
> Identification : 'DVD A  DH20A4P  '
> Revision       : '9P59'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: 0x001B (DVD+R)
> Profile: 0x002B (DVD+R/DL)
> Profile: 0x001B (DVD+R) (current)
> Profile: 0x001A (DVD+RW)
> Profile: 0x0016 (DVD-R/DL layer jump recording)
> Profile: 0x0015 (DVD-R/DL sequential recording)
> Profile: 0x0014 (DVD-RW sequential recording)
> Profile: 0x0013 (DVD-RW restricted overwrite)
> Profile: 0x0012 (DVD-RAM)
> Profile: 0x0011 (DVD-R sequential recording)
> Profile: 0x0010 (DVD-ROM)
> Profile: 0x000A (CD-RW)
> Profile: 0x0009 (CD-R)
> Profile: 0x0008 (CD-ROM)
> Profile: 0x0002 (Removable disk)
> Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
> Driver flags   : SWABAUDIO BURNFREE
> Supported modes: PACKET SAO
> Drive buf size : 1068032 = 1043 KB
> Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
> communication breaks or freezes immediately after that.
> FIFO size      : 4194304 = 4096 KB
> Track 01: data  3952 MB
> Total size:     4538 MB (449:39.69) = 2023477 sectors
> Lout start:     4539 MB (449:41/52) = 2023477 sectors
> Current Secsize: 2048
> HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction.
> Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 271627
> Speed set to 11080 KB/s
> Starting to write CD/DVD at speed   8.0 in real SAO mode for single
> session.
> Last chance to quit, starting real write in    0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
> Sending CUE sheet...
> Starting new track at sector: 0
> Track 01: 3952 of 3952 MB written (fifo 100%) [buf  99%]   6.3x.
> Track 01: Total bytes read/written: 4144080896/4144080896 (2023477
> sectors).
> Writing  time:  552.440s
> Average write speed   5.9x.
> Min drive buffer fill was 11%
> Fixating...
> Fixating time:   25.127s
> wodim: fifo had 65274 puts and 65274 gets.
> wodim: fifo was 0 times empty and 23516 times full, min fill was 56%.

Thank you. The results of using the cli utility wodim are below
Looking at the results it appears that my DVD drive is now set to /dev/scd0
Before I upgraded from M7 to M8 it was set to /dev/sr0


EP45:~ # wodim --devices
wodim: Overview of accessible drives (1 found) :
-------------------------------------------------------------------------
 0  dev='/dev/scd0'     rwrw-- : 'ASUS' 'DRW-2014S1T'


-- 
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx