Mailinglist Archive: opensuse-factory (279 mails)

< Previous Next >
Re: [opensuse-factory] cloning a hard drive with YaST
  • From: Sid Boyce <sboyce@xxxxxxxxxxxxxxxx>
  • Date: Wed, 11 Mar 2009 13:06:49 +0000
  • Message-id: <49B7B769.6010408@xxxxxxxxxxxxxxxx>
Sid Boyce wrote:
Richard (MQ) wrote:
Sid,

I can give that a try when I have the new drive booted. At the moment
I'm waiting for a new motherboard and memory as there is a hardware
problem, especially noticeable during a kernel build, make && make
modules_install a number of times gets it built and it boots. Odd
problems appear elsewhere also.
You have tried a new PSU (or a swap from another system) _before_
condemning the mobo...?

My experience of faults like this is that the PSU is often the culprit
(and cheap and easy to swap!)


The PSU was tested out on another box with similar hardware and extra
cards. I have had a number of PSU's fail, some within a few months of new.
An upgrade was on the cards anyway and all the bits including a 600W PSU
were delivered 20 minutes ago.
Regards
Sid.

New PSU, same problem, so it's CPU/Mem/Motherboard hardware problem as
suspected. I can play with those bits when I have the new bits installed.
Regards
Sid.
--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks

--
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx

< Previous Next >