Mailinglist Archive: opensuse-factory (845 mails)
| < Previous | Next > |
Re: [opensuse-factory] Load_Cycle_Count changes under B2
- From: James PEARSON <pearson44j@xxxxxxxxxx>
- Date: Mon, 5 May 2008 08:16:09 +0200
- Message-id: <20080505081609.37f2545a@xxxxxxxxxxx>
On Sun, 4 May 2008 21:36:15 +0200
Jan Ritzerfeld <suse@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Ok so I left my T60 on all night (23 h 30 to 7 h 30 this morning)
Here is the new reading...
linux:~ # smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always
- 2746
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
Jan Ritzerfeld <suse@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Am Sonntag, 4. Mai 2008 schrieb James PEARSON:
[...]
In order to answer your queston (Load_Cycle_Count variations as seen by
smartctl under B2 ) I decided to recompile the kernel as that is a fairly
heavy loadwork.
[...]
This special value increases, if there is almost no load. Putting the hard
drive under heavy load will stop the increase. See
http://en.opensuse.org/Disk_Power_Management
Ok so I left my T60 on all night (23 h 30 to 7 h 30 this morning)
Here is the new reading...
linux:~ # smartctl -a /dev/sda | grep Load_Cycle_Count
193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always
- 2746
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
| < Previous | Next > |