Juan Erbes wrote:
2007/9/22, Richard (MQ)
: Trying to do a 'new installation' of 10.3 RC1 on my primary test machine, for these tests I use a second 10GB HD sdb (first HD sda has 10.2 and 'another' OS on it).
First time round, installer complained it couldn't read partition table (which was created a few weeks ago by a 10.3 Beta installation) - attempting to select manually using 'expert partitioning' YaST informed me it was only 4.3GB
Exit & re-boot, BIOS also says 4.3G! so power off and on again and it's back to 10G (which is what it IS).
If the bios stated 4.3G, then You has a hardware problem, not a software problem!
And if the HD is of only 10 GB, it's a little old and probably at the end of his days.
I take your point, but this disc has been used for this same purpose for about a year (some alpha and all beta & gold OpenSuSE releases) without showing anything like this. I've never seen anything similar before... I will try a different disc and report back to this thread before raising a bug. -- Cheers Richard (MQ) --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org