Mailinglist Archive: opensuse-factory (509 mails)
| < Previous | Next > |
Re: [opensuse-factory] An adventurous update to beta2...
- From: Christian Boltz <opensuse@xxxxxxxxx>
- Date: Tue, 28 Aug 2007 03:15:53 +0200
- Message-id: <200708280315.53997@xxxxxxxxxxxxxxx>
Hallo,
(@bnc-team-screening: sorry that you have that much work with me ;-)
Am Montag, 27. August 2007 schrieb Andreas Jaeger:
> Christian Boltz <opensuse@xxxxxxxxx> writes:
> > - my 10.2 partition is only offered for update if I select "show
> > all partitions" (and: no, I don't think that
> > https://bugzilla.novell.com/show_bug.cgi?id=299667 is invalid -
> > the solution would be to ask for the password of the encrypted
> > partition earlier)
>
> Please file a bug report.
I reopened the existing report instead and hope it won't be closed as
invalid again.
> > - /etc/cryptotab is not converted to /dev/sd*, so mounting
> > encrypted partitions while installation fails
>
> Another bugreport.
>
> > - /etc/fstab is also not converted, so mounting everything except /
> > fails
> > - /boot/grub/device.map also wasn't modified, resulting in a
> > failure at bootloader installation
> > - installing the kernel also failed because mkinitrd was still
> > trying to use hda - workaround: change fstab manually
>
> Lots of bugreports :-(
These bugs might be related to #299667 - I mentioned them there instead
of opening separate reports.
> > - the tab order in the dialog to add an add-on repository is broken
#305074
> > - the pattern "update test packages" does not drop in any of the
> > "update-test-*" packages
>
> Mmh - that's bad :-(
#305075
> > - I had the latest KDE packages from Buildservice on 10.2, and the
> > beta2 installation had to downgrade them. This resulted in lots of
> > conflicts, YaST even marked the beta2 KDE packages with "arch
> > change" and did not honor what I chose in the conflict dialog.
> > I had to go to the packages mask and mark the KDE packages to be
> > refreshed.
#305080
(Yes, I know that buildservice packages are officially unsupported.
However the KDE packages are used widely, additionally the symptoms
look like solver problems, so no work for you, Stephan ;-)
> > - strange version difference: I'm still using agrep from SUSE 8.2,
> > which is version 4.0 (newer releases didn't contain it) and now
> > re-appeared with version 0.7.
Any idea on this one?
It's not really a bug, just a bit strange.
> > - on the first run, the installation aborted unexpectedly, probably
> > because the y2logs and a testcase needed too much RAM.
> > Sidenote: I have 1GB RAM...
> > Anyways, expected result is a warning "out of RAM, please cleanup
> > the logs or add swap."
#305083 - not because of the size needed, but because of the unexpected
exit of YaST.
> > - oh, just after clicking "accept" in the pattern details view, I
> > got about 200 MB additional y2log in 10 seconds...
>
> with debuggin enabled? This should not happen otherwise and would be
> worth a bugreport.
In the first try, I had created a testcase. (But no other debugging set)
In the second try, no debugging ws enabled. And manual mode should not
be relevant, if I understand Jiri's mail correct.
#305087
> > - for OpenOffice, thesaurus packages are installed for lots of
> > languages I never use. I'd expect to only have packages for my
> > system language by default.
>
> Agreed -> please do one more report.
#305088
> > - Some packages unselected in pattern details (the OpenOffice
> > thesaurus packages) were re-selected after clicking "packages" in
> > the proposal - which means YaST does changes after a user has done
> > a per-package selection in the pattern details view
#305091
> > - what about gtk-qt-engine? It conflicts with kcm_gtk...
>
> Isn't it removed? But perhaps not done properly :-(
#305094
> > - java_1_4_2_sun_jdbc also caused a conflict, maybe it should be
> > obsoleted by a current (1.5.0) package
>
> Yeah, perhaps we need one more bugreport.
You can have one ;-)
#305096
> > - YaST didn't display the slide show, dunno why
#305097
> > - installation of several non-OSS packages failed with error
> > message "Inconsistency detected by ld.so: dl-open.c: 623:
> > _dl_open: Assertion `_dl_debug_initialize [...]"
> > %post failed with exit status 127
> > affected: nspluginwrapper, acroread, flash-player, RealPlayer
>
> I haven't seen this - please file a bug.
#305098
> > - according to the y2log, the downloaded release notes have version
> > 10.2.3 which is obviously older than 10.3.5 in Factory
> >
> :-(
#305101
> > - SuSEconfig.zzzopt_gnome-compat code looks ugly code, it should
> > have more than one FIXME ;-)
No bug report yet, I have to re-check it.
> > - opensuse-updater is not obsoleted by opensuse-updater-kde, so I
> > have installed both of them now
>
> It should be, I check the spec file. Please file a report.
already known, #304336
> > And some things I already found in the running system:
> > - something seems to run "insserv -r boot.crypto" while
> > installation, so my encrypted partition wasn't mounted at boot
> > (workaround: insserv it again)
> >
> :-(
#305105
> > - opensuse-updater (the old one, still running after the update)
> > lists also *packages* to update, not only patches (intended?)
> > - opensuse-updater (again the old one) has a grey, empty area at
> > the bottom - where's the patch description?
Not worth bug reports, I guess - but I'll have to check the
zypp-checkpatches-wrapper output.
> > - the new opensuse-updater-kde initially shows only an overview.
> > I'm not yet sure if I really like this (for me it's a click more to
> > see the available updates) - so please add an "always show details"
> > checkbox.
#305109
This makes a total of 15 bugreports opened today...
> > - YOU doesn't display information about packages, just lists the
> > patches (empty list at the right section of the window)
not reported yet, it's finally time to go to bed ;-)
> > I would be happy if someone could add a short note to every item if
> > it is already known or if I need to file a bugreport ;-)
>
> I have not found really many that are known to *me* :-(
*g*
> Thanks a lot for your testing!
No problem, you probably know that I don't really like stable
releases ;-) (however I didn't use an alpha yet)
However, I'd need days with more than 24 hours. Can't you invent
something like that? ;-)
> > PS: I'll now going to verify if all YaST modules support the help
> > parameter (bugs 269886 to 269914) to get a better feeling...
At least this resulted in lots of bugs changed to VERIFIED, however I
had to reopen some.
Regards,
Christian Boltz
--
31.8.-3.9.2007: Weinfest und Jubiläum - 1225 Jahre Insheim
Pig Slip, Hifi-Delity, Human Fact, Frank Petersen und die Söhne Insheims
spielen bei der Landjugend.
Mehr Infos: www.Landjugend-Insheim.de
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
(@bnc-team-screening: sorry that you have that much work with me ;-)
Am Montag, 27. August 2007 schrieb Andreas Jaeger:
> Christian Boltz <opensuse@xxxxxxxxx> writes:
> > - my 10.2 partition is only offered for update if I select "show
> > all partitions" (and: no, I don't think that
> > https://bugzilla.novell.com/show_bug.cgi?id=299667 is invalid -
> > the solution would be to ask for the password of the encrypted
> > partition earlier)
>
> Please file a bug report.
I reopened the existing report instead and hope it won't be closed as
invalid again.
> > - /etc/cryptotab is not converted to /dev/sd*, so mounting
> > encrypted partitions while installation fails
>
> Another bugreport.
>
> > - /etc/fstab is also not converted, so mounting everything except /
> > fails
> > - /boot/grub/device.map also wasn't modified, resulting in a
> > failure at bootloader installation
> > - installing the kernel also failed because mkinitrd was still
> > trying to use hda - workaround: change fstab manually
>
> Lots of bugreports :-(
These bugs might be related to #299667 - I mentioned them there instead
of opening separate reports.
> > - the tab order in the dialog to add an add-on repository is broken
#305074
> > - the pattern "update test packages" does not drop in any of the
> > "update-test-*" packages
>
> Mmh - that's bad :-(
#305075
> > - I had the latest KDE packages from Buildservice on 10.2, and the
> > beta2 installation had to downgrade them. This resulted in lots of
> > conflicts, YaST even marked the beta2 KDE packages with "arch
> > change" and did not honor what I chose in the conflict dialog.
> > I had to go to the packages mask and mark the KDE packages to be
> > refreshed.
#305080
(Yes, I know that buildservice packages are officially unsupported.
However the KDE packages are used widely, additionally the symptoms
look like solver problems, so no work for you, Stephan ;-)
> > - strange version difference: I'm still using agrep from SUSE 8.2,
> > which is version 4.0 (newer releases didn't contain it) and now
> > re-appeared with version 0.7.
Any idea on this one?
It's not really a bug, just a bit strange.
> > - on the first run, the installation aborted unexpectedly, probably
> > because the y2logs and a testcase needed too much RAM.
> > Sidenote: I have 1GB RAM...
> > Anyways, expected result is a warning "out of RAM, please cleanup
> > the logs or add swap."
#305083 - not because of the size needed, but because of the unexpected
exit of YaST.
> > - oh, just after clicking "accept" in the pattern details view, I
> > got about 200 MB additional y2log in 10 seconds...
>
> with debuggin enabled? This should not happen otherwise and would be
> worth a bugreport.
In the first try, I had created a testcase. (But no other debugging set)
In the second try, no debugging ws enabled. And manual mode should not
be relevant, if I understand Jiri's mail correct.
#305087
> > - for OpenOffice, thesaurus packages are installed for lots of
> > languages I never use. I'd expect to only have packages for my
> > system language by default.
>
> Agreed -> please do one more report.
#305088
> > - Some packages unselected in pattern details (the OpenOffice
> > thesaurus packages) were re-selected after clicking "packages" in
> > the proposal - which means YaST does changes after a user has done
> > a per-package selection in the pattern details view
#305091
> > - what about gtk-qt-engine? It conflicts with kcm_gtk...
>
> Isn't it removed? But perhaps not done properly :-(
#305094
> > - java_1_4_2_sun_jdbc also caused a conflict, maybe it should be
> > obsoleted by a current (1.5.0) package
>
> Yeah, perhaps we need one more bugreport.
You can have one ;-)
#305096
> > - YaST didn't display the slide show, dunno why
#305097
> > - installation of several non-OSS packages failed with error
> > message "Inconsistency detected by ld.so: dl-open.c: 623:
> > _dl_open: Assertion `_dl_debug_initialize [...]"
> > %post failed with exit status 127
> > affected: nspluginwrapper, acroread, flash-player, RealPlayer
>
> I haven't seen this - please file a bug.
#305098
> > - according to the y2log, the downloaded release notes have version
> > 10.2.3 which is obviously older than 10.3.5 in Factory
> >
> :-(
#305101
> > - SuSEconfig.zzzopt_gnome-compat code looks ugly code, it should
> > have more than one FIXME ;-)
No bug report yet, I have to re-check it.
> > - opensuse-updater is not obsoleted by opensuse-updater-kde, so I
> > have installed both of them now
>
> It should be, I check the spec file. Please file a report.
already known, #304336
> > And some things I already found in the running system:
> > - something seems to run "insserv -r boot.crypto" while
> > installation, so my encrypted partition wasn't mounted at boot
> > (workaround: insserv it again)
> >
> :-(
#305105
> > - opensuse-updater (the old one, still running after the update)
> > lists also *packages* to update, not only patches (intended?)
> > - opensuse-updater (again the old one) has a grey, empty area at
> > the bottom - where's the patch description?
Not worth bug reports, I guess - but I'll have to check the
zypp-checkpatches-wrapper output.
> > - the new opensuse-updater-kde initially shows only an overview.
> > I'm not yet sure if I really like this (for me it's a click more to
> > see the available updates) - so please add an "always show details"
> > checkbox.
#305109
This makes a total of 15 bugreports opened today...
> > - YOU doesn't display information about packages, just lists the
> > patches (empty list at the right section of the window)
not reported yet, it's finally time to go to bed ;-)
> > I would be happy if someone could add a short note to every item if
> > it is already known or if I need to file a bugreport ;-)
>
> I have not found really many that are known to *me* :-(
*g*
> Thanks a lot for your testing!
No problem, you probably know that I don't really like stable
releases ;-) (however I didn't use an alpha yet)
However, I'd need days with more than 24 hours. Can't you invent
something like that? ;-)
> > PS: I'll now going to verify if all YaST modules support the help
> > parameter (bugs 269886 to 269914) to get a better feeling...
At least this resulted in lots of bugs changed to VERIFIED, however I
had to reopen some.
Regards,
Christian Boltz
--
31.8.-3.9.2007: Weinfest und Jubiläum - 1225 Jahre Insheim
Pig Slip, Hifi-Delity, Human Fact, Frank Petersen und die Söhne Insheims
spielen bei der Landjugend.
Mehr Infos: www.Landjugend-Insheim.de
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx
| < Previous | Next > |