On Mon, Jun 18, 2007 at 12:23:32AM +1000, Keith Goggin wrote:
usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: No IRQ known for interrupt pin A of device 0000:00:13.0. Probably buggy MP table. ohci_hcd 0000:00:13.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.0 setup! ohci_hcd 0000:00:13.0: init 0000:00:13.0 fail, -19 PCI: No IRQ known for interrupt pin B of device 0000:00:13.1. Probably buggy MP table. ohci_hcd 0000:00:13.1: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.1 setup! ohci_hcd 0000:00:13.1: init 0000:00:13.1 fail, -19 PCI: No IRQ known for interrupt pin C of device 0000:00:13.2. Probably buggy MP table. ohci_hcd 0000:00:13.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.2 setup! ohci_hcd 0000:00:13.2: init 0000:00:13.2 fail, -19 PCI: No IRQ known for interrupt pin B of device 0000:00:13.3. Probably buggy MP table. ohci_hcd 0000:00:13.3: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.3 setup! ohci_hcd 0000:00:13.3: init 0000:00:13.3 fail, -19 PCI: No IRQ known for interrupt pin C of device 0000:00:13.4. Probably buggy MP table. ohci_hcd 0000:00:13.4: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.4 setup! ohci_hcd 0000:00:13.4: init 0000:00:13.4 fail, -19 PCI: No IRQ known for interrupt pin D of device 0000:00:13.5. Probably buggy MP table. ehci_hcd 0000:00:13.5: Found HC with no IRQ. Check BIOS/PCI 0000:00:13.5 setup! ehci_hcd 0000:00:13.5: init 0000:00:13.5 fail, -19
Eeek, that's not good at all (and is indicitive of not a USB problem, but something else.) Can you try out the -vanilla kernel and let us know if that fixes the problem or not? If not, we need to know this real soon as 2.6.22 is about to be released. thanks, greg k-h --------------------------------------------------------------------- To unsubscribe, e-mail: opensuse-factory+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-factory+help@opensuse.org