Mailinglist Archive: opensuse-factory (850 mails)

[Marcus Meissner <meissner@xxxxxxx>]

On Mon, Sep 11, 2006 at 06:58:40PM -0300, Juan Erbes wrote:
> 2006/9/11, Marcus Meissner <meissner@xxxxxxx>:
> >On Mon, Sep 11, 2006 at 06:16:12PM -0300, Juan Erbes wrote:
> >> 2006/9/11, Marcus Meissner <meissner@xxxxxxx>:
> >> >On Mon, Sep 11, 2006 at 01:50:56PM -0300, Juan Erbes wrote:
> >> >> Many weeks ago, upgrading with smart, it replaced  mDNSResponder with
> >> >> avahi-compat-mDNSResponder, and then, Digikam has hanged, any time I
> >> >> would to connect the cam. Then I installed mDNSResponder with smart,
> >> >> and it has removed avahi-compat-mDNSResponder, and digikam worked ok.
> >> >> With the two last updates (the last was not complete), Digicam can't
> >> >> connec to the camera, but now I mean that is a permission problem,
> >> >> derived from PolicyKit, because the permissions are set only to root
> >> >> in the usb devices.
> >> >
> >> >digikam will also likely crash when using avahi-compat-mDNSResponder
> >> >and camera autodetect.
> >> >
> >>
> >> I have'nt installed avahi-compat-mDNSResponder.
> >> The message from dmesg is:
> >>
> >> usb 5-1: new full speed USB device using uhci_hcd and address 2
> >> usb 5-1: new device found, idVendor=04a9, idProduct=3055
> >> usb 5-1: new device strings: Mfr=1, Product=2, SerialNumber=0
> >> usb 5-1: Product: PowerShot G2
> >> usb 5-1: Manufacturer: Canon Inc.
> >> usb 5-1: configuration #1 chosen from 1 choice
> >>
> >> I do'nt know waht is "configuration #1 chosen from 1 choice"
> >>
> >> About permission (the last connection):
> >> ls -l /dev/bus/usb/005/005
> >> crw-rw-r--+ 1 root root 189, 516 2006-09-11 18:11 /dev/bus/usb/005/005
> >
> >Looks good. Please run:
> >        getfacl /dev/bus/usb/005/005
> >
> >> With the introduction of udev in version 10.1, I got similar problems,
> >> and the problems was with wrong permissions in this oportunity. I mean
> >> the problem is now the same, and derived from PolicyKit.
> >
> 
> I got:
> getfacl /dev/bus/usb/005/008
> getfacl: Removing leading '/' from absolute path names
> # file: dev/bus/usb/005/008
> # owner: root
> # group: root
> user::rw-
> user:jerbes:rw-
> group::r--
> mask::rw-
> other::r--
> 
> /dev/bus/usb/005/008 was obtained via udevmonitor.
> 
> I have debugged digikam with ddd/gdb, and obtained:
> digikam: symbol lookup error: /usr/lib/libgphoto2_port/0.6.0/disk.so:
> undefined symbol: dbus_connection_disconnect

Yes, this is yet another Alpha bug... I fixed it in Factory.

Ciao, Marcus
---------------------------------------------------------------------
To unsubscribe, e-mail: opensuse-factory+unsubscribe@xxxxxxxxxxxx
For additional commands, e-mail: opensuse-factory+help@xxxxxxxxxxxx