Mailinglist Archive: opensuse-es (758 mails)

< Previous Next >
Re: [opensuse-es] Disco duro de portatil
  • From: Josep m Solé <jsole125@xxxxxxxxxxxxxxxxx>
  • Date: Wed, 19 Mar 2008 22:18:58 +0100
  • Message-id: <200803192219.08432.jsole125@xxxxxxxxxxxxxxxxx>
El Miércoles, 19 de Marzo de 2008 21:31, Carlos E. R. va escriure:


Salida del comando smartctl -l error /dev/sda:

Lo que hace falta es "-a", no "-l".

smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 42 family
Device Model: ST94019A
Serial Number: 3KW35B01
Firmware Version: 3.05
User Capacity: 40,007,761,920 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Wed Mar 19 23:00:58 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 119) The previous self-test completed
having
the read element of the test failed.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 31) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 056 051 034 Pre-fail Always
- 20628490
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 095 095 020 Old_age Always
- 5263
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 080 060 030 Pre-fail Always
- 103062525
9 Power_On_Hours 0x0032 094 094 000 Old_age Always
- 5467
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always
- 3981
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always
- 2336
193 Load_Cycle_Count 0x0032 001 001 000 Old_age Always
- 485046
194 Temperature_Celsius 0x0022 039 054 000 Old_age Always
- 39
195 Hardware_ECC_Recovered 0x001a 056 051 000 Old_age Always
- 20628490
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 1
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 1
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0

SMART Error Log Version: 1
ATA Error Count: 168 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 168 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours)
When the command that caused the error occurred, the device was active or
idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 02:39:32.412 READ DMA
27 00 00 00 00 00 e0 00 02:39:32.412 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 02:39:32.403 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT

Error 167 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours)
When the command that caused the error occurred, the device was active or
idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 02:39:32.412 READ DMA
27 00 00 00 00 00 e0 00 02:39:32.412 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 02:39:32.403 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT

Error 166 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours)
When the command that caused the error occurred, the device was active or
idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA
27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 02:39:27.387 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:39:27.387 READ NATIVE MAX ADDRESS EXT

Error 165 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours)
When the command that caused the error occurred, the device was active or
idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA
27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 02:39:17.344 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:39:17.343 READ NATIVE MAX ADDRESS EXT

Error 164 occurred at disk power-on lifetime: 5466 hours (227 days + 18 hours)
When the command that caused the error occurred, the device was active or
idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 02:39:17.360 READ DMA
27 00 00 00 00 00 e0 00 02:39:17.360 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 02:39:17.352 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 02:39:17.344 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 02:39:17.343 READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed: read failure 70% 5464
19815269
# 2 Short offline Completed: read failure 90% 5464
19815269

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


--
josep m solé
< Previous Next >
Follow Ups