Mailinglist Archive: opensuse-es (758 mails)
| < Previous | Next > |
[opensuse-es] Disco duro de portatil
- From: Josep m Solé <jsole125@xxxxxxxxxxxxxxxxx>
- Date: Wed, 19 Mar 2008 20:01:54 +0100
- Message-id: <200803192002.07725.jsole125@xxxxxxxxxxxxxxxxx>
Saludos
Desde ayer al arrancar el portátil suelta el siguiente mensaje:
Your hard disk drive is failing! S.M.A.R.T. message: Device:/dev/sda, 1
offline uncorrectable sectors
Una vez cerrado el mensaje se puede continuar usando el ordenador en
condiciones, aparentemente, de toda normalidad.
He hecho copia de respaldo de los datos. He pasado el comando
smartctl -l error /dev/sda (al final pongo la salida). Me gustaría saber qué
debo/puedo hacer y la gravedad de la situación.
Salida del comando smartctl -l error /dev/sda:
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 156 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 156 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:54.382 READ DMA
27 00 00 00 00 00 e0 00 01:37:54.374 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:54.374 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:54.368 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 155 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:54.382 READ DMA
27 00 00 00 00 00 e0 00 01:37:54.374 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:54.374 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:54.368 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 154 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:40.030 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 153 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:40.030 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:35.068 READ NATIVE MAX ADDRESS EXT
Error 152 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:30.044 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:35.068 READ NATIVE MAX ADDRESS EXT
--
josep m solé
Desde ayer al arrancar el portátil suelta el siguiente mensaje:
Your hard disk drive is failing! S.M.A.R.T. message: Device:/dev/sda, 1
offline uncorrectable sectors
Una vez cerrado el mensaje se puede continuar usando el ordenador en
condiciones, aparentemente, de toda normalidad.
He hecho copia de respaldo de los datos. He pasado el comando
smartctl -l error /dev/sda (al final pongo la salida). Me gustaría saber qué
debo/puedo hacer y la gravedad de la situación.
Salida del comando smartctl -l error /dev/sda:
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 156 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 156 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:54.382 READ DMA
27 00 00 00 00 00 e0 00 01:37:54.374 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:54.374 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:54.368 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 155 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:54.382 READ DMA
27 00 00 00 00 00 e0 00 01:37:54.374 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:54.374 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:54.368 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 154 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:40.030 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:49.402 READ NATIVE MAX ADDRESS EXT
Error 153 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:40.030 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:35.068 READ NATIVE MAX ADDRESS EXT
Error 152 occurred at disk power-on lifetime: 5463 hours (227 days + 15 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 65 5b 2e e1 Error: UNC at LBA = 0x012e5b65 = 19815269
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 5f 5b 2e e1 00 01:37:30.044 READ DMA
27 00 00 00 00 00 e0 00 01:37:35.085 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 01:37:35.084 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 01:37:35.076 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 01:37:35.068 READ NATIVE MAX ADDRESS EXT
--
josep m solé
| < Previous | Next > |