Mailinglist Archive: opensuse-es (1193 mails)

< Previous Next >
Re: [opensuse-es] Fax con Asterisk
  • From: Octavio <octavio-avalos@xxxxxxxx>
  • Date: Mon, 21 Jan 2008 23:59:51 +0100
  • Message-id: <1a9205300801211459w39740746y79b03e3bfaac6f8@xxxxxxxxxxxxxx>
El 21/01/08, Camaleón <noelamac@xxxxxxxxx> escribió:
2008/1/21, Octavio:

Bueno, vamos a ver como salió esto. A continuación os pongo el log del
envio:

Este sí :-)

Jan 21 20:43:18.13: [30105]: SEND send PPS (partial page signal)
Jan 21 20:43:18.13: [30105]: SEND send MPS (more pages, same document)
Jan 21 20:43:18.13: [30105]: <-- [9:AT+FRH=3\r]
Jan 21 20:43:18.38: [30105]: --> [7:CONNECT]
Jan 21 20:43:19.50: [30105]: --> [2:OK]
Jan 21 20:43:19.50: [30105]: SEND recv MCF (message confirmation)
Jan 21 20:43:19.50: [30105]: DELAY 70 ms
Jan 21 20:43:19.57: [30105]: SEND end page
Jan 21 20:43:19.57: [30105]: SEND FAX (000000128): FROM
octavioavalos@xxxxxxxxxx TO 98xxxx (page 1 of 2 sent in 0:16)
Jan 21 20:43:19.57: [30105]: SEND FAX (000000128): FROM
octavioavalos@xxxxxxxxxx TO 98xxxx (docq/cover18;c1 sent in 0:16)

Los números... hay que quitar los números de fax... ;-)

Hasta aquí todo parece normal. Se envía la primera página (¿la
cubierta?) y empiaza a preparar la segunda...

Jan 21 20:43:20.58: [30105]: SEND file "docq/doc25.ps;c1"
Jan 21 20:43:20.58: [30105]: SEND begin page
Jan 21 20:43:20.61: [30105]: SEND EOFB

Jan 21 20:43:34.97: [30105]: --> [10:NO CARRIER]
Jan 21 20:43:34.97: [30105]: SEND end page
Jan 21 20:43:34.97: [30105]: Unspecified Transmit Phase C error

"No carrier" es como si hubiera perdido la comunicación. Y el mensaje
de error importante viene después:

***
Unspecified Transmit Phase C error

DTE to DCE data underflow - normally caused by a poor quality modem
with insufficient buffer, or caused by a Serial port which is not
properly handling software
flow control or which cannot properly buffer the data flow at normal speeds.
***

Pon los datos del archivo de configuración del módem
(/var/spool/fax/etc/config.ttyUSB0), pero sólo a partir de la línea
que dice "modem-related stuff..."

Saludos,

Esta línea no la tengo. A continuación pongo el config.ttyUSB0 completo

# $Id: topic,v 1.4 2003/07/25 16:23:26 lhoward Exp $
#
# prototype config for Topic modems and other similarly broken firmwares
#

#
CountryCode: 34
AreaCode: 981
FAXNumber: XXXXXXXXXXX
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: "etc/dialrules"
ServerTracing: 1
SessionTracing: 11
RecvFileMode: 0777
LogFileMode: 0777
DeviceMode: 0777
RingsBeforeAnswer: 6
SpeakerVolume: medium
GettyArgs: "-r -b -s %s %l"
LocalIdentifier: "XXXXXXXXXXXX"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25
#

ModemType: Class1 # use this to supply a hint

# as of v1.20, +FTS is not supported, which will cause "Stop and wait"
# failures unless we use software pauses instead...

Class1PPMWaitCmd: "<delay\0727>" # \072 == : to avoid awk problem
Class1TCFWaitCmd: "<delay\0727>"
Class1EOPWaitCmd: "<delay\0729>"
Class1SwitchingCmd: "<delay\0727>" # assumption: +FRS not supported



Un saludo

--
Octavio Ávalos
---------------------------------------------------------------------
Para dar de baja la suscripción, mande un mensaje a:
opensuse-es+unsubscribe@xxxxxxxxxxxx
Para obtener el resto de direcciones-comando, mande
un mensaje a:
opensuse-es+help@xxxxxxxxxxxx

< Previous Next >
Follow Ups