Carlos E. R. escribió:
El 2007-11-30 a las 07:31 -0300, Alberto Vicat escribió:
¿S.M.A.R.T. te lo sigue dando como fallado?
Se puede mirar "smartctl -a /dev/sdb", y sale el log de errores anteriores.
-- Saludos Carlos E.R.
Esta es la salida del sitado comando: linux-lemahaeger:/home/lemahaeger # smartctl -a /dev/sdb smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.9 family Device Model: ST3160812AS Serial Number: 4LS0H80J Firmware Version: 3.AAD User Capacity: 160,041,885,696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Nov 30 10:03:15 2007 CLST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 075 006 Pre-fail Always - 213836503 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2322 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 085 060 030 Pre-fail Always - 384680920 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 7450 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 098 098 020 Old_age Always - 3018 187 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 244 189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0 190 Temperature_Celsius 0x0022 071 050 045 Old_age Always - 488046621 194 Temperature_Celsius 0x0022 029 050 000 Old_age Always - 29 (Lifeti me Min/Max 0/12) 195 Hardware_ECC_Recovered 0x001a 068 045 000 Old_age Always - 220491154 197 Current_Pending_Sector 0x0012 001 001 000 Old_age Always - 4294967294 198 Offline_Uncorrectable 0x0010 001 001 000 Old_age Offline - 4294967294 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 444 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 444 occurred at disk power-on lifetime: 7285 hours (303 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 dd 07 60 e0 Error: UNC at LBA = 0x006007dd = 6293469 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 08 d7 07 60 e0 00 01:23:04.986 READ DMA EXT 25 03 80 67 6a 8b e0 00 01:23:04.985 READ DMA EXT 25 03 80 e7 69 8b e0 00 01:23:04.985 READ DMA EXT 25 03 80 67 69 8b e0 00 01:23:04.984 READ DMA EXT 25 03 80 e7 68 8b e0 00 01:23:04.983 READ DMA EXT Error 443 occurred at disk power-on lifetime: 7285 hours (303 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 dd 07 60 e0 Error: UNC at LBA = 0x006007dd = 6293469 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 08 d7 07 60 e0 00 01:23:01.555 READ DMA EXT 25 03 80 6f 1d 03 e0 00 01:23:01.554 READ DMA EXT 25 03 80 ef 1c 03 e0 00 01:23:02.125 READ DMA EXT 25 03 80 6f 1c 03 e0 00 01:23:01.565 READ DMA EXT 25 03 80 ef 1b 03 e0 00 01:23:01.564 READ DMA EXT Error 442 occurred at disk power-on lifetime: 7285 hours (303 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 dd 07 60 e0 Error: UNC at LBA = 0x006007dd = 6293469 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 08 d7 07 60 e0 00 01:22:58.903 READ DMA EXT 25 03 80 af 0d 71 e0 00 01:22:58.902 READ DMA EXT 25 03 80 2f 0d 71 e0 00 01:22:58.900 READ DMA EXT 25 03 80 af 0c 71 e0 00 01:22:58.899 READ DMA EXT 25 03 80 2f 0c 71 e0 00 01:22:58.898 READ DMA EXT Error 441 occurred at disk power-on lifetime: 7285 hours (303 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 dd 07 60 e0 Error: UNC at LBA = 0x006007dd = 6293469 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 08 d7 07 60 e0 00 01:22:55.075 READ DMA EXT 25 03 01 00 00 00 e0 00 01:22:55.075 READ DMA EXT 25 03 01 00 00 00 e0 00 01:22:53.262 READ DMA EXT c6 03 10 01 a5 a5 a0 00 01:22:53.249 SET MULTIPLE MODE 91 03 3f 01 a5 a5 af 00 01:22:53.221 INITIALIZE DEVICE PARAMETERS [OBS-6] Error 440 occurred at disk power-on lifetime: 7285 hours (303 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 dd 07 60 e0 Error: UNC at LBA = 0x006007dd = 6293469 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 03 08 d7 07 60 e0 00 01:22:50.280 READ DMA EXT 25 03 01 00 00 00 e0 00 01:22:50.280 READ DMA EXT c6 03 10 01 a5 a5 a0 00 01:22:53.262 SET MULTIPLE MODE 91 03 3f 01 a5 a5 af 00 01:22:53.249 INITIALIZE DEVICE PARAMETERS [OBS-6] f5 03 0c 01 a5 a5 a0 00 01:22:53.221 SECURITY FREEZE LOCK SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 7449 - # 2 Extended offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. linux-lemahaeger:/home/lemahaeger # Saludos. --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org