Mailinglist Archive: opensuse-es (656 mails)
| < Previous | Next > |
[opensuse-es] ¿Que tarjeta de TV comprar?
- From: "Carlos E. R." <robin.listas@xxxxxxxxxxxxxx>
- Date: Fri, 13 Jul 2007 22:31:41 +0200 (CEST)
- Message-id: <Pine.LNX.4.64.0707132222310.5934@xxxxxxxxxxxxxxxx>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hola:
Parece que mi tarjeta de TV ha petado. De repente, sólo muestra un negro
absoluto, salvo cuando cambio a la entrada de video que muestra fondo azul
hasta que enciendo el vídeo que cambia a fondo negro. Y suelta errores en
el log:
Jul 13 22:15:39 nimrodel kernel: bttv0: reset, reinitialize
Jul 13 22:15:39 nimrodel kernel: bttv0: PLL: 28636363 => 35468950 . ok
Jul 13 22:15:53 nimrodel kernel: bttv0: SCERR @ 01a48000,bits: HSYNC OFLOW FDSR SCERR*
Jul 13 22:16:15 nimrodel kernel: bttv0: timeout: drop=26 irq=3725/3725, risc=0522a09c, bits: HSYNC OFLOW
Pierde interrupciones. Algunos de estos errores los soltaba siempre,
aunque eran más esporádicos. Estos dias me llenaban el log cuando se
colgaba la tarjeta.
También da errores en el boot.log:
<6>bttv0: Avermedia eeprom[0x4011]: tuner=5 radio:no remote control:yes
<4>bttv0: using tuner=5
<6>bttv0: i2c: checking for MSP34xx @ 0x80... not found
<6>bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
<6>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
<6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
<6>bttv0: i2c: checking for TDA9887 @ 0x86... not found
<6>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
<6>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>bttv0: registered device video0
<6>bttv0: registered device vbi0
<6>bttv0: PLL: 28636363 => 35468950 .. ok
<6>input: bttv IR (card=13) as /class/input/input3
<4>bttv-input: bttv IR (card=13) detected at pci-0000:02:02.0/ir0
<6>bt878: AUDIO driver version 0.0.0 loaded
<6>bt878: Bt878 AUDIO function found (0).
<6>ACPI: PCI Interrupt 0000:02:02.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
<4>bt878_probe: card id=[0x41461], Unknown card.
<4>Exiting..
<6>ACPI: PCI interrupt for device 0000:02:02.1 disabled
<4>bt878: probe of 0000:02:02.1 failed with error -22
Estos fallos han ido ocurriendo paulatinamente, y yo sospecho del
hardware, de la tarjeta en sí. El sonido si funciona, oigo la tele.
Así que... ¿que tarjeta compraríais? A lo mejor ya hay tarjetas
interesantes que permitan ver la TV analógica y la digital (TDT), todo en
uno.
Estoy acostumbrado a ver (más bien oir) algunos programas de fondo
mientras estoy tecleando en el PC. Y poner una tele físicamente en la mesa
del ordenador, que ya está bien llenita, es poco práctico, aunque igual lo
hago unos dias.
- --
Saludos
Carlos E.R.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Made with pgp4pine 1.76
iD8DBQFGl+ExtTMYHG2NR9URAvUTAJ4m+hrEIWMOVD3bepAXF8v3kLsQDwCffALV
wHGp0qSLPnbO4qqMj9WKhMY=
=2AT9
-----END PGP SIGNATURE-----
Hash: SHA1
Hola:
Parece que mi tarjeta de TV ha petado. De repente, sólo muestra un negro
absoluto, salvo cuando cambio a la entrada de video que muestra fondo azul
hasta que enciendo el vídeo que cambia a fondo negro. Y suelta errores en
el log:
Jul 13 22:15:39 nimrodel kernel: bttv0: reset, reinitialize
Jul 13 22:15:39 nimrodel kernel: bttv0: PLL: 28636363 => 35468950 . ok
Jul 13 22:15:53 nimrodel kernel: bttv0: SCERR @ 01a48000,bits: HSYNC OFLOW FDSR SCERR*
Jul 13 22:16:15 nimrodel kernel: bttv0: timeout: drop=26 irq=3725/3725, risc=0522a09c, bits: HSYNC OFLOW
Pierde interrupciones. Algunos de estos errores los soltaba siempre,
aunque eran más esporádicos. Estos dias me llenaban el log cuando se
colgaba la tarjeta.
También da errores en el boot.log:
<6>bttv0: Avermedia eeprom[0x4011]: tuner=5 radio:no remote control:yes
<4>bttv0: using tuner=5
<6>bttv0: i2c: checking for MSP34xx @ 0x80... not found
<6>bttv0: i2c: checking for MSP34xx (alternate address) @ 0x88... not found
<6>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
<6>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
<6>bttv0: i2c: checking for TDA9887 @ 0x86... not found
<6>tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
<6>tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
<6>bttv0: registered device video0
<6>bttv0: registered device vbi0
<6>bttv0: PLL: 28636363 => 35468950 .. ok
<6>input: bttv IR (card=13) as /class/input/input3
<4>bttv-input: bttv IR (card=13) detected at pci-0000:02:02.0/ir0
<6>bt878: AUDIO driver version 0.0.0 loaded
<6>bt878: Bt878 AUDIO function found (0).
<6>ACPI: PCI Interrupt 0000:02:02.1[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
<4>bt878_probe: card id=[0x41461], Unknown card.
<4>Exiting..
<6>ACPI: PCI interrupt for device 0000:02:02.1 disabled
<4>bt878: probe of 0000:02:02.1 failed with error -22
Estos fallos han ido ocurriendo paulatinamente, y yo sospecho del
hardware, de la tarjeta en sí. El sonido si funciona, oigo la tele.
Así que... ¿que tarjeta compraríais? A lo mejor ya hay tarjetas
interesantes que permitan ver la TV analógica y la digital (TDT), todo en
uno.
Estoy acostumbrado a ver (más bien oir) algunos programas de fondo
mientras estoy tecleando en el PC. Y poner una tele físicamente en la mesa
del ordenador, que ya está bien llenita, es poco práctico, aunque igual lo
hago unos dias.
- --
Saludos
Carlos E.R.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)
Comment: Made with pgp4pine 1.76
iD8DBQFGl+ExtTMYHG2NR9URAvUTAJ4m+hrEIWMOVD3bepAXF8v3kLsQDwCffALV
wHGp0qSLPnbO4qqMj9WKhMY=
=2AT9
-----END PGP SIGNATURE-----
| < Previous | Next > |