El 24/03/07, Carlos E. R. escribió:
Si la placa lo soporta, claro.
:-D Si la placa es sata 150, el disco se acomodará a esa velocidad de transferencia. Hum, veamos qué dice la wiki: http://en.wikipedia.org/wiki/Serial_ATA Backward compatibility between SATA 1.5 Gbit/s controllers and SATA 3.0 Gbit/s devices was important, so SATA/300's autonegotiation sequence is designed to fallback to SATA/150 speed (1.5 Gbit/s rate) when in communication with such devices. In practice, some older SATA controllers do not properly implement SATA speed negotiation. Affected systems require user-intervention to manually set the SATA 3.0 Gbit/s peripherals to 1.5 Gbit/s mode, generally through the use of a jumper. [1] Known faulty chipsets include the VIA VT8237 and VT8237R south bridges, and the VIA VT6420 and VT6421L standalone SATA controllers. [2] SiS's 760 and 964 chipsets also initially exhibited this problem, though it can be rectified with an updated SATA controller ROM.[citation needed] Es mejor ser previsor y comprar un disco a 300 por si más adelante tienes una placa que sí soporte esa velocidad. Saludos, -- Camaleón --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org