El Lunes, 8 de Enero de 2007 02:45, Carlos E. R. escribió:
El 2007-01-08 a las 01:41 +0100, Octavio Ávalos escribió:
Fijaros acabo de poner la instrucción que me indicáis y me sale esto:
linux:~ # faxaddmodem -s 14400 ttyS1
Warning, you have selected a DTE-DCE communication rate (14400) that differs from known standards. 14400 may not work correctly for sending and receiving facsimile: check your modem manual to make sure that 14400 is acceptable.
Usa 19200, con esa no protestará.
Sorry, the device is currently in use by another program.
De eso ya estuvimos hablando de como se hacía, así que a ello. Comentas lo del faxgetty, init q, lsof grep tal y cual, fichero lock, PID del proceso, etc, etc.
Con esta ya salió algo mas, te lo pongo a continuación: linux:~ # faxaddmodem -s 19200 ttyS1 Ok, time to setup a configuration file for the modem. The manual page config(5F) may be useful during this process. Also be aware that at any time you can safely interrupt this procedure. Reading scheduler config file /var/spool/fax/etc/config. Hey, there is an existing config file /var/spool/fax/etc/config.ttyS1... Your facsimile phone number ("") does not agree with your country code (34) or area code (""). The number should be a fully qualified international dialing number of the form: +34 "" <local phone number> Spaces, hyphens, and periods can be included for legibility. For example, +34."".555.1212 is a possible phone number (using your country and area codes). The non-default server configuration parameters are: CountryCode: 34 LongDistancePrefix: 0 InternationalPrefix: 00 DialStringRules: etc/dialrules.europe ServerTracing: 527 SessionTracing: 527 Are these ok [yes]? Now we are going to probe the tty port to figure out the type of modem that is attached. This takes a few seconds, so be patient. Note that if you do not have the modem cabled to the port, or the modem is turned off, this may hang (just go and cable up the modem or turn it on, or whatever). Using user-specified 19200 to talk to modem. There was no response from the modem. Perhaps the modem is turned off or the cable between the modem and host is not connected. Please check the modem and hit a carriage return when you are ready to try again: Sin embargo está encendido, lo que no está corriendo es Hylafax. Un saludo -- Octavio Ávalos --------------------------------------------------------------------- Para dar de baja la suscripción, mande un mensaje a: opensuse-es+unsubscribe@opensuse.org Para obtener el resto de direcciones-comando, mande un mensaje a: opensuse-es+help@opensuse.org