Mailinglist Archive: opensuse-es (1722 mails)

< Previous Next >
Re: [suse-linux-s] Programa de envío de FAX
  • From: Daniel Rincón Prada <DANIEL.RINCON@xxxxxxxx>
  • Date: Tue, 24 Aug 2004 20:25:35 +0200
  • Message-id: <412B881F.1010908@xxxxxxxx>
Querida Rosario,

Esto ya es desesperación con el fax, este HylaFAX nos va a volver a todos locos, yo he seguido las instrucciones más o menos, yo no se exactamente a cuales te refieres porque son cosas curiosisimas yo no se por ejemplo EN EL YAST EN DISPOSITIVOS DE RED HAY UN FAX ESO HAY QUE CONFIGURARLO o hay que tirarse de lleno en modo texto y con unas historias que no sabes ni que responder, con un manual en la ayuda de suse que eso es un desastre, yo no me aclaro con este sistema te lo digo como lo siento, yo no se que son estos rollos ni siquiera que coño es este programa porque yo trabajo con el Norton utilities en windows y configuro el Fax para enviar faxes sin más, pongo cuatro datos, y yo se que no voy a recibir, porque tampco quiero, solo quiero enviar un puñetero fax, no creo que sea tan complicado joder.

Fijate esto es increible, yo no se que hacer con esta historia...

Un saludo a todos,

Daniel Rincón Prada

P.D.: Aquí tienes mi configuración de faxsetup... yo no se que he hecho mal.

portatil:/home/drincon # faxsetup

Setup program for HylaFAX (tm) 4.1.8.

Created for i386-suse-linux on Tue Apr 6 18:12:35 UTC 2004.

Reading cached parameters from /var/spool/fax/etc/setup.cache.

Checking system for proper client configuration.
Checking system for proper server configuration.


Warning: /usr/sbin/mgetty does not exist or is not an executable program!

The file:

/usr/sbin/mgetty

does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /usr/sbin/mgetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.


Warning: /usr/sbin/vgetty does not exist or is not an executable program!

The file:

/usr/sbin/vgetty

does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /usr/sbin/vgetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.


Warning: /usr/sbin/egetty does not exist or is not an executable program!

The file:

/usr/sbin/egetty

does not exist or this file is not an executable program. The
HylaFAX software optionally uses this program and the fact that
it does not exist on the system is not a fatal error. If the
program resides in a different location and you do not want to
install a symbolic link for /usr/sbin/egetty that points to your program
then you must reconfigure and rebuild HylaFAX from source code.

Setting Ghostscript font path in /usr/lib/fax/hyla.conf.


Make /var/spool/fax/bin/ps2fax a link to /var/spool/fax/bin/ps2fax.gs.


Make /var/spool/fax/bin/pdf2fax a link to /var/spool/fax/bin/pdf2fax.gs.

Update /var/spool/fax/status/any.info.

HylaFAX configuration parameters are:

[1] Init script starts faxq: yes
[2] Init script starts hfaxd yes
[3] Start old protocol: no
[4] Start paging protocol: no
Are these ok [yes]?

Modem support functions written to /var/spool/fax/etc/setup.modem.
Configuration parameters written to /var/spool/fax/etc/setup.cache.

Restarting HylaFAX server processes.

You have a HylaFAX scheduler process running. faxq will be
restarted shortly, as soon as some other work has been completed.
Can I terminate this faxq process (10516) [yes]?
Should I restart the HylaFAX server processes [yes]?

/etc/init.d/hylafax start
Starting service HylaFAX done

You do not appear to have any modems configured for use. Modems are
configured for use with HylaFAX with the faxaddmodem(8C) command.
Do you want to run faxaddmodem to configure a modem [yes]?
Serial port that modem is connected to []? ttyS0

Ok, time to setup a configuration file for the modem. The manual
page config(5F) may be useful during this process. Also be aware
that at any time you can safely interrupt this procedure.

Reading scheduler config file /var/spool/fax/etc/config.

No existing configuration, let's do this from scratch.

Country code [1]? 34
Area code [948]?
Phone number of fax modem [+1 948 555-1212]? +34 948 776472
Local identification string (for TSI/CIG) ["NothingSetup"]?
Long distance dialing prefix [00]? 0
International dialing prefix [011]? 00
Dial string rules file (relative to /var/spool/fax) ["etc/dialrules"]?
Tracing during normal server operation [1]?
Tracing during send and receive sessions [0xffffffff]?
Protection mode for received facsimile [0600]?
Protection mode for session logs [0600]?
Protection mode for ttyS0 [0600]?
Rings to wait before answering [1]?
Modem speaker volume [off]? on
Command line arguments to getty program ["-h %l dx_%s"]?
Pathname of TSI access control list file (relative to /var/spool/fax) [""]?
Pathname of Caller-ID access control list file (relative to /var/spool/fax) [""]
?
Tag line font file (relative to /var/spool/fax) [etc/lutRS18.pcf]?
Tag line format string ["From %%l|%c|Page %%P of %%T"]?
Time before purging a stale UUCP lock file (secs) [30]?
Hold UUCP lockfile during inbound data calls [Yes]?
Hold UUCP lockfile during inbound voice calls [Yes]?
Percent good lines to accept during copy quality checking [95]?
Max consecutive bad lines to accept during copy quality checking [5]?
Max number of pages to accept in a received facsimile [25]?
Syslog facility name for ServerTracing messages [daemon]?
Set UID to 0 to manipulate CLOCAL [""]?
Use available priority job scheduling mechanism [""]?

The non-default server configuration parameters are:

CountryCode: 34
AreaCode: 948
FAXNumber: +34 948 776472
LongDistancePrefix: 0
InternationalPrefix: 00
DialStringRules: "etc/dialrules"
SessionTracing: 0xffffffff
RingsBeforeAnswer: 1
SpeakerVolume: off
GettyArgs: "-h %l dx_%s"
LocalIdentifier: "NothingSetup"
TagLineFont: etc/lutRS18.pcf
TagLineFormat: "From %%l|%c|Page %%P of %%T"
MaxRecvPages: 25

Are these ok [yes]?

Now we are going to probe the tty port to figure out the type
of modem that is attached. This takes a few seconds, so be patient.
Note that if you do not have the modem cabled to the port, or the
modem is turned off, this may hang (just go and cable up the modem
or turn it on, or whatever).

Probing for best speed to talk to modem:
Unable to deduce DTE-DCE speed; check that you are using the
correct device and/or that your modem is setup properly. If
all else fails, try the -s option to lock the speed.
Do you want to run faxaddmodem to configure another modem [yes]? no

Done verifying system setup.
portatil:/home/drincon # faxgetty
bash: faxgetty: command not found
portatil:/home/drincon # mc
Xlib: connection to ":0.0" refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key

portatil:/home/drincon # hylafax
bash: hylafax: command not found
portatil:/home/drincon # hylafax
bash: hylafax: command not found
portatil:/home/drincon # susefax

You have to install the package java to run this script or
you have to take care, that java exists...

portatil:/home/drincon #

Rosario Muñoz escribió:


El programa que yo utilizo es el hylafax que viene incluido en los paquetes
de suse, a mi me costo configurarlo pero con la ayuda de la página oficial
lo logre. Espero que te sirva esto de algo.
Saludos.


< Previous Next >
References