Hola a tod@s: Mi problema es que tras instalar la tarjeta de TV solo puedo ver y grabar a traves del canal composite pues no he podido sintonizar ni el video ni la TV. Estos son varios datos que espero orienten a algún gurú de la lista y me podais echar una mano: modules.conf-> Yast me detectó automáticamente la terjeta,pero yo le añadí alguna cosilla... # YaST2 configured TV card # WL76.FURnweI9FA4:Pinnacle PCTV alias char-major-81 videodev alias char-major-81-0 bttv alias char-major-81-1 off alias char-major-81-2 off alias char-major-81-3 off post-install bttv modprobe -k tuner; modprobe -k videodev options i2c scan=1 verbose=1 i2c_debug=0 options bttv cards=39 pll=1 options tuner type=1 debug=0 dmesg-> i2c-core.o: client [MT2032 universal] unregistered. i2c-core.o: adapter unregistered: bt848 #0 i2c-core.o: driver unregistered: i2c TV tuner driver i2c-core.o: driver i2c TV tuner driver registered. tuner: ignoring SMBus Via Pro adapter at e800 i2c adapter [id=0x40002] tuner: ignoring ISA main adapter i2c adapter [id=0x50000] bttv: driver version 0.7.104 loaded bttv: using 4 buffers with 2080k (8320k total) for capture bttv: Host bridge is PCI device 1106:0691 bttv: Host bridge is PCI device 1106:3057 bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 00:09.0, irq: 9, latency: 32, mmio: 0xf9000000 bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012 bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected] i2c-algo-bit.o: Adapter: bt848 #0 scl: 1 sda: 1 -- testing... i2c-algo-bit.o:1 scl: 1 sda: 0 i2c-algo-bit.o:2 scl: 1 sda: 1 i2c-algo-bit.o:3 scl: 0 sda: 1 i2c-algo-bit.o:4 scl: 1 sda: 1 i2c-algo-bit.o: bt848 #0 passed test. tuner: probing bt848 #0 i2c adapter [id=0x10005] tuner: chip found @ 0xc0 tuner(bttv): type forced to 1 (Philips PAL_I (FI1246 and compatibles)) [insmod] i2c-core.o: client [Philips PAL_I (FI1246 and compat] registered to adapter [bt848 #0](pos. 0). i2c-core.o: adapter bt848 #0 registered as adapter 2. bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: pinnacle/mt: id=1 info="PAL / mono" radio=no bttv0: using tuner=33 tuner: type already set (1) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: PLL: 28636363 => 35468950 .. ok bttv0: registered device video0 bttv0: registered device vbi0 Al ejecutar scantv no detecta ninguna estación,pero no detecta tampoco errores. Necesitais más información? La verdad es que llevo ya unos dias con ello y me da rabia tener que pasarla al PC que usa guindos,más teniendo en cuenta que se suponía que esta tarjeta estaba soportada en linux. Gracias a tod@s por la atencion... Salu2 -- Chema Ollés Usuario Linux: #198057