Mailinglist Archive: opensuse-es (478 mails)

[bautista_arias <bautista_arias@xxxxxxxxxxxxxx>]

Hola, tanto en el Pc con Mandrake com Suse son Zip 100MB Atapi  marca 
Net (si IDE)

Cordial saludo.
Bautista



gfaraway wrote:

> que calse de zipera tenes ????
> una ide interna???
> si tenes otra zipera ese fstab no sirve, nose, no se toda la historia, solo 
> digo
> Doei, suerte
> l Mié 14 Ago 2002 18:28, bautista_arias escribió:
> Cordial saludo,
>  
>
> > Carlos Robinson,No logro entender que anda mal, he hecho todo lo que has
> > dicho:
> >
> >
> > Cuando intento montar un zip en mi Suse:
> >
> >
> > joabau@joabau:~> mount /zip/
> > /dev/hdd4: Error de entrada/salida
> > mount: no se ha podido determinar tipo de sistema de archivos y no se ha
> > especifica
> > do ninguno
> > joabau@joabau:~>
> >
> >
> >
> > este es el fstab en Suse 8
> >
> >
> > /dev/hda5    /    reiserfs    defaults 1 2
> > /dev/cdrecorder    /media/cdrecorder    auto    ro,noauto,user,exec 0 0
> > /dev/cdrom    /media/cdrom    auto    ro,noauto,user,exec 0 0
> > devpts    /dev/pts    devpts    defaults 0 0
> > /dev/fd0    /media/floppy    auto    noauto,user,sync 0 0
> > proc    /proc    proc    defaults 0 0
> > usbdevfs    /proc/bus/usb    usbdevfs    noauto 0 0
> > /dev/hda2    /windows/C    vfat    noauto,user 0 0
> > /dev/hdd4    /media/zip    auto    defaults,noauto,user,exec 0 0
> > /dev/hdd1       /media/zip2      auto    noauto,user 0 0
> > /dev/hda6    swap    swap    pri=42 0 0
> >
> >
> > El mismo dico Zip lo monto en el otro pc que tiene mandrake y si monta,
> > y el fstab en mandrake es:
> >
> > /dev/hda5 / ext3 defaults 1 1
> > none /dev/pts devpts mode=0620 0 0
> > none /dev/shm tmpfs defaults 0 0
> > /dev/hda7 /home ext3 defaults 1 2
> > /mnt/cdrom /mnt/cdrom supermount
> > dev=/dev/hdb,fs=iso9660,ro,--,iocharset=iso8859-15 0 0
> > /mnt/floppy /mnt/floppy supermount
> > dev=/dev/fd0,fs=vfat,--,iocharset=iso8859-15,umask=0,sync,codepage=850 0 0
> > /dev/hda1 /mnt/windows vfat defaults 0 0
> > /mnt/zip /mnt/zip supermount
> > dev=/dev/sda4,fs=vfat,--,iocharset=iso8859-15,umask=0,sync,codepage=850 0 0
> > none /proc proc defaults 0 0
> > /dev/hda6 swap swap defaults 0 0
> >
> > Pero lo mas raro aun es que tengo un disco Zip que si monta en todos en
> > Suse 8, en Mandrake e inclusive en el Mac de
> > la empresa en la que trabajo, estas son sus caracterÌstica:
> >
> > joabau:~ # fsck.msdos -v /dev/hdd4
> > dosfsck 2.8 (28 Feb 2001)
> > dosfsck 2.8, 28 Feb 2001, FAT32, LFN
> > Boot sector contents:
> > System ID "({YlnIHC"
> > Media byte 0xf8 (hard disk)
> >       512 bytes per logical sector
> >      2048 bytes per cluster
> >         1 reserved sector
> > First FAT starts at byte 512 (sector 1)
> >         2 FATs, 16 bit entries
> >     98304 bytes per FAT (= 192 sectors)
> > Root directory starts at byte 197120 (sector 385)
> >       512 root directory entries
> > Data area starts at byte 213504 (sector 417)
> >     49039 data clusters (100431872 bytes)
> > 32 sectors/track, 64 heads
> >         0 hidden sectors
> >    196576 sectors total
> > Reserved field in VFAT long filename slot is not 0 (but 0x67).
> > 1: Fix.
> > 2: Leave it.
> > ? 2
> > Checking for unused clusters.
> > /dev/hdd4: 237 files, 32494/49039 clusters
> >
> >
> > Bueno en tonces con la guia que me has dado:
> >
> > joabau:~ # fdisk /dev/hdd
> > Device contains neither a valid DOS partition table, nor Sun, SGI or OSF
> > disklabel
> > Building a new DOS disklabel. Changes will remain in memory only,
> > until you decide to write them. After that, of course, the previous
> > content won't be recoverable.
> >
> >
> > Command (m for help): c
> > DOS Compatibility flag is not set
> >
> > Command (m for help): c
> > DOS Compatibility flag is set
> >
> > Command (m for help): n
> > Command action
> >   e   extended
> >   p   primary partition (1-4)
> > p
> > Partition number (1-4): 4
> > First cylinder (1-95, default 1):
> > Using default value 1
> > Last cylinder or +size or +sizeM or +sizeK (1-95, default 95): 96
> > Value out of range.
> > Last cylinder or +size or +sizeM or +sizeK (1-95, default 95):
> > Using default value 95
> >
> > Command (m for help): p
> >
> > Disk /dev/hdd: 64 heads, 32 sectors, 95 cylinders
> > Units = cylinders of 2048 * 512 bytes
> >
> >   Device Boot    Start       End    Blocks   Id  System
> > /dev/hdd4             1        95     97264   83  Linux
> >
> > Command (m for help): t
> > Partition number (1-4): 4
> > Hex code (type L to list codes): 6
> > Changed system type of partition 4 to 6 (FAT16)
> >
> > Command (m for help): p
> >
> > Disk /dev/hdd: 64 heads, 32 sectors, 95 cylinders
> > Units = cylinders of 2048 * 512 bytes
> >
> >   Device Boot    Start       End    Blocks   Id  System
> > /dev/hdd4             1        95     97264    6  FAT16
> >
> > Command (m for help): a
> > Partition number (1-4): 4
> >
> > Command (m for help): p
> >
> > Disk /dev/hdd: 64 heads, 32 sectors, 95 cylinders
> > Units = cylinders of 2048 * 512 bytes
> >
> >   Device Boot    Start       End    Blocks   Id  System
> > /dev/hdd4   *         1        95     97264    6  FAT16
> >
> > Command (m for help): w
> > The partition table has been altered!
> >
> > Calling ioctl() to re-read partition table.
> >
> > WARNING: If you have created or modified any DOS 6.x
> > partitions, please see the fdisk manual page for additional
> > information.
> > Syncing disks.
> > joabau:~ # fdisk /dev/hdd
> >
> > Command (m for help): v
> > 31 unallocated sectors
> >
> > Command (m for help): h
> > h: unknown command
> > Command action
> >   a   toggle a bootable flag
> >   b   edit bsd disklabel
> >   c   toggle the dos compatibility flag
> >   d   delete a partition
> >   l   list known partition types
> >   m   print this menu
> >   n   add a new partition
> >   o   create a new empty DOS partition table
> >   p   print the partition table
> >   q   quit without saving changes
> >   s   create a new empty Sun disklabel
> >   t   change a partition's system id
> >   u   change display/entry units
> >   v   verify the partition table
> >   w   write table to disk and exit
> >   x   extra functionality (experts only)
> >
> > Command (m for help): q
> >
> > joabau:~ # mkfs.msdos /dev/hdd4
> > mkfs.msdos 2.8 (28 Feb 2001)
> > joabau:~ # fsck.msdos -v /dev/hdd4
> > dosfsck 2.8 (28 Feb 2001)
> > dosfsck 2.8, 28 Feb 2001, FAT32, LFN
> > Boot sector contents:
> > System ID "mkdosfs"
> > Media byte 0xf8 (hard disk)
> >       512 bytes per logical sector
> >      2048 bytes per cluster
> >         1 reserved sector
> > First FAT starts at byte 512 (sector 1)
> >         2 FATs, 16 bit entries
> >     97280 bytes per FAT (= 190 sectors)
> > Root directory starts at byte 195072 (sector 381)
> >       512 root directory entries
> > Data area starts at byte 211456 (sector 413)
> >     48528 data clusters (99385344 bytes)
> > 32 sectors/track, 64 heads
> >         0 hidden sectors
> >    194528 sectors total
> > Checking for unused clusters.
> > /dev/hdd4: 0 files, 0/48528 clusters
> > joabau:~ #
> >
> >
> > Ok, monto el disco y escribo un simple texto en Èl lo expulso lo monto
> > otravez y todo bien.
> > lo llevo a el otro Pc que tiene Madarke y ...
> > bash-2.03$ mount /mnt/zip
> > bash-2.03$ cd /mnt/zip
> > bash-2.03$ mount /mnt/zip: Error de entrada/salida
> >
> >   :-(
> >
> > En la oficina con un Mac y winx y tampoco, pero lo le di formato con
> > Mandrake y si monta en Mac.
> >
> > Loco verdad?
> >
> > Saludos Bautista.
> >    
>
>