ok - tried the boot with debug mode
from the look eth0 is not getting any dhcp details - so if the nics not
configured how can it find anything?
Will poke more...
"CyberOrg"
On Thu, Aug 14, 2008 at 6:08 PM, john-paul drawneek
wrote: eth2 Link encap:Ethernet HWaddr 00:14:22:72:E1:4C inet addr:192.168.100.1 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::214:22ff:fe72:e14c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:402346 errors:0 dropped:0 overruns:0 frame:0 TX packets:401279 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:24555074 (23.4 Mb) TX bytes:581565649 (554.6 Mb)
cat /etc/dhcpd.conf
Looks ok, could you check IP fowarding is enabled on the server?
yes
and /etc/sysconfig/dhcpd, to debug it.
That looks perfect too.
Its your auto gen code...
/etc/init.d/dhcpd start Starting DHCP server Internet Systems Consortium DHCP Server V3.0.6 Copyright 2004-2007 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ /usr/sbin/dhcpd: : Unknown error 1701220736
failed
See nothing special, all pretty much default.
Disabled dnsmasq before running rcdhcpd restart?
yep
All I am doing is following your instructions, why should I have to list them back to you?
To find out the solution to the problem you are having and I have reached the limit of my capability to help you.
Nice....
Ciao
-J -- To unsubscribe, e-mail: opensuse-edu+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-edu+help@opensuse.org
-- To unsubscribe, e-mail: opensuse-edu+unsubscribe@opensuse.org For additional commands, e-mail: opensuse-edu+help@opensuse.org