Am Montag, 26. Januar 2015, 15:05:59 schrieb David Haller:
Hallo,
Am Mon, 26 Jan 2015, Joerg Thuemmler schrieb:
Get mit Yast, -> System -> Boot Loader -> BootLoader Einstellungen Tab: Abschnittsverwaltung -> selectierte gewünschte Boot-option -> Dann weiter mit "Bearbeiten" -> Feld "Optionaler Parameter für die Kernel Befehlszeile" -> Hänge mit einem Leerzeichen getrennt "net.ifnames=0" an. -> Betätige mit "OK"
[..]
führt aber wohl dazu, dass Du das bei jedem Kernelupdate wieder in die Kernelzeile einbauen musst?
Nein, das wird in /etc/sysconfig/bootloader in den Variablen DEFAULT_APPEND / FAILSAFE_APPEND / XEN_KERNEL_APPEND gespeichert. Die Datei kann man auch direkt bearbeiten.
HTH, -dnh
Hallo David, die Datei sieht so aus: ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: list(grub,grub2,grub2-efi,none) ## Default: grub2 # # Type of bootloader in use. # For making the change effect run bootloader configuration tool # and configure newly selected bootloader # # LOADER_TYPE="grub2" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: "no" # # Enable UEFI Secure Boot support # This setting is only relevant to UEFI which supports UEFI. It won't # take effect on any other firmware type. # # SECURE_BOOT="yes" ## Path: System/Bootloader ## Description: Bootloader configuration ## Type: yesno ## Default: no # # Should the boot cycle detection be used to # avoid unconditional reboot cycles of not # supervised system. # CYCLE_DETECTION="no" ## Type: integer(0:) ## Default: 1 # # The number of the entry in grub's menu.lst # which should be used on the next reboot cycle. # Note that the first entry has the number 0. # CYCLE_NEXT_ENTRY="1" Aber ich könnte in YAST -> System -> /etc/sysconfig-Editor unter System - Bootloader bei den von Dir angegeben Variablen den Eintrag net.ifnames=0 hinten anhängen, richtig? Aber was bewirkt net.ifnames=0? Muss da evtl. auch noch ein biosdevname=0 hinten an? Herbert -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org