Mailinglist Archive: opensuse-de (743 mails)

< Previous Next >
Re: hpaio kein scanner von diesem Treiber erkannt


teddybaer@xxxxxxxxxxxx schrieb:

teddybaer@xxxxxxxxxxxx schrieb:
Ernst Scott schrieb:
teddybaer@xxxxxxxxxxxx schrieb:
Hallo, was hat mein Scanner denn? Kann man durch hp-check erkennen,
warum er nicht scannt? Was muß ich noch angeben, was Euch zur Hilfe ist,
damit Ihr mir besser helfen könnt?

Ist das so ein schwieriges Problem, das man da nichts tun kann? Ist
jetzt mein Scanner hin?

Anderen wurde hier tagelang und seitenlang geholfen.

Was soll ich ich jetzt tun? Ich brauch den Scanner für meine Aufgabe in
meiner Gemeinde.

Danke für Eure Hilfe im Voraus schon.

Annelie

teddybaer@xxxxxxxxxxxx schrieb:
Hallo, ich habe ein Problem mit meinem Scanner. Es ist ein hp 1050
Scanner. Er will nicht mehr scannen.

Ich habe suse 11.3 drauf.

Ich habe einfach mal hp-check eingegeben. Da kommen folgende Meldungen:

Jesusistdieliebe@Jesusliebtdich:~> hp-check

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro supplied package (.deb, .rpm, etc) or an already
built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode will check both of the above cases (both compile-
and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Jesusliebtdich 2.6.34.10-0.6-desktop #1 SMP PREEMPT 2011-12-13
18:27:38 +0100 i686 i686 i386 GNU/Linux

Distribution:
suse 11.3

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: Scheduler ist aktiv
Version: 1.4.4
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0


------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with
the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the
-r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System
development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language
interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library
development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of
programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for
commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the
libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming
language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.


----------------------
| HPLIP INSTALLATION |
----------------------


Currently installed HPLIP version...
HPLIP 3.10.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/manufacturer-PPDs/hplip
ppdbase=/usr/share/cups/model/manufacturer-PPDs
doc=/usr/share/doc/packages/hplip
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/lib/cups/driver

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=yes
foomatic-rip-hplip-install=yes
hpcups-install=yes
cups-drv-install=no
cups-ppd-install=yes
internal-tag=3.10.2rc1.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=no
hpcups-only-build=no
hpijs-only-build=no


Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0



Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = "hp:/usb/psc_1100_series?serial=MY388F909BB0"

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.10.2rc1.9
date_time = 22.03.2012 07:03:35

[settings]
systray_messages = 0
systray_visible = 0

[fax]
email_address =
voice_phone =

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5



--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------


Deskjet
-------
Type: Unknown
Device URI: parallel:/dev/lp0
PPD: /etc/cups/ppd/Deskjet.ppd
PPD Description: HP Deskjet 1050 j410 Series, hpcups 3.11.10
Printer status: Drucker „Deskjet“ ist inaktiv; aktiviert seit Mi 21 Mär
2012 16:20:49 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or
hpfax: CUPS backend to function in HPLIP.

Deskjet-1050-J410-series
------------------------
Type: Unknown
Device URI: usb://HP/Deskjet%201050%20J410%20series?serial=CN1343J1D805HW
PPD: /etc/cups/ppd/Deskjet-1050-J410-series.ppd
PPD Description: HP Deskjet 1050 j410 Series, hpcups 3.11.10
Printer status: Drucker „Deskjet-1050-J410-series“ ist inaktiv;
aktiviert seit Mi 21 Mär 2012 17:27:32 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or
hpfax: CUPS backend to function in HPLIP.


----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.



-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x8911 at 001:002:
Device URI: hp:/usb/Deskjet_1050_J410_series?serial=CN1343J1D805HW

HP Linux Imaging and Printing System (ver. 3.10.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

/usr/lib/python2.6/site-packages/gtk-2.0/gtk/__init__.py:127:
RuntimeWarning: PyOS_InputHook is not availa of PyGTK
set_interactive(1)
error: Unsupported model: Deskjet_1050_J410_series

---------------
| USER GROUPS |
---------------

users sys lp


-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html


Done.
Jesusistdieliebe@Jesusliebtdich:~> error: No system tray detected on
this system. Unable to start, exiting
Jesusistdieliebe@Jesusliebtdich:~>

Was kann ich tun, damit mein Scanner wieder scannt?

Annelie

hallo

Benutze nicht den Namen Gottes für Spielchen auf dem PC!
Das ist doch mein Privat-PC. Jesus ist mein ein und alles. Er ist mein
Papa im Himmel. Jesus ist wirklich die Liebe. Er liebt Dich und mich.
Ich vergebe Dir diesen Satz. Jesus liebt und weint um Dich. Er ist so
traurig, das Du so einen Satz schreibst.

Annelie

Wenn wieder hp-check ausgeführt wird, dann als "hp-check -c"
Ich habe jetzt hp-check-c eingegeben, jetzt kannst Du den Fehler eher
erkennen, jetzt siehst Du eher den Fehler:
Jesusistdieliebe@Jesusliebtdich:~> hp-check -c

HP Linux Imaging and Printing System (ver. 3.10.2)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before
compiling the HPLIP supplied tarball (.tar.gz or .run) to
determine if the proper dependencies are installed to successfully
compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro supplied package (.deb, .rpm, etc) or an already
built HPLIP supplied tarball has the proper dependencies installed to
successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode will check both of the above cases (both compile-
and run-time
dependencies).



Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux Jesusliebtdich 2.6.34.10-0.6-desktop #1 SMP PREEMPT 2011-12-13
18:27:38 +0100 i686 i686 i386 GNU/Linux

Distribution:
suse 11.3

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: Scheduler ist aktiv
Version:
1.4.4


error_log is set to level:
warn





Checking for
dbus/python-dbus...


dbus daemon is
running.


python-dbus version:
0.83.0




-----------------------------
| COMPILE TIME DEPENDENCIES |
-----------------------------


Checking for dependency: CUPS devel- Common Unix Printing System
development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of
programs...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.


---------------
| USER GROUPS |
---------------

users sys lp


-----------
| SUMMARY |
-----------


Was Sane anbetriefft wird doch in obigem Scan angezeigt,
daß *.dev-Datei(en) fehlt/fehlen.
Installiere alle sane mit Endung *.dev
Ich habe dieses jetzt in einem Forum gefunden: wird dieses .dev so
installiert?

* libsane deinstallieren
* build-essential installieren
* sane downloaden: a3p1
* libusb-dev installieren
* configure && make && make install
* notfalls linux/usb.h durch usb.h ersetzen
* xsane downloaden: xsane
* libgtk2.0-dev, liblcms-dev und libtiff-dev installieren
* xsane entpacken und im xsane Ordner
* configure && make && make install

Ich habe doch keine Ahnung davon, echt nicht. Kannst Du mir nicht
weiterhelfen????

Ich bin so fertig, ich bin soooooooooooooo traurig, das mein Scannner nicht
geht. Ich kann deswegen nicht geht. Was soll ich jetzt tun???????????
Annelie


Muß ich dieses

*.dev jetzt in der Konsole eingeben?


Kannst Du mir erklären, wie man das macht? Wo muß ich dieses komische
.dev eingeben? Muß ich jetzt Pakete installieren im yast?

Annelie
Ernst










--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@xxxxxxxxxxxx
Um den Listen Administrator zu erreichen, schicken
Sie eine Mail an: opensuse-de+owner@xxxxxxxxxxxx

< Previous Next >