Mailinglist Archive: opensuse-de (743 mails)
| < Previous | Next > |
Re: Rescue-System auf Platte installieren [Lösung]
- From: Volker Kuhlmann <list0570@xxxxxxxxxxxxxxx>
- Date: Sun, 04 Mar 2012 19:38:36 +1300
- Message-id: <20120304063836.GD31789@paradise.net.nz>
On Thu 23 Feb 2012 12:15:11 NZDT +1300, Christian Boltz wrote:
Spitze, danke Dir, das ist der Schlüssel zur Lösung, die ich dann
hiermit anbieten kann:
http://en.opensuse.org/SDB:Rescue_system_on_disk
title Rescue
kernel /boot/media/boot/x86_64/loader/linux
rescue=hd:/boot/media
keytable=en-us
namescheme=
splash=silent vga=0x318 panic=10
linemode=1 linuxrc.debug=4
initrd /boot/media/boot/x86_64/loader/initrd
(Zeilenumbrüche dienen der Lesbarkeit und müssen entfernt werden.)
Zwingend notwendige Dateien von der Scheibe sind
boot/x86_64/common
boot/x86_64/config
boot/x86_64/loader/initrd
boot/x86_64/loader/linux
boot/x86_64/rescue
content
content.asc
Nach /boot/media kopieren, Struktur beibehalten. Oder halt alles
anpassen.
Weitere Notizen:
# * See http://en.opensuse.org/Linuxrc
# * See console 3 for debug output (default, linuxrc.log=/dev/tty3).
# There seems to be no way to get the log output to file.
# * rescue=... is the same as rescue=1 install=...
# * namescheme= switches back to devices by-device; default is by-id.
# * Without keytable=, loader stops and asks.
# * Without file content, repo is not found.
# * Without file content.asc loader stops and asks.
# * Without "?device=..." all partitions are tried to find the file content.
# To specify device, use rescue=hd:/boot/media?device=/dev/sda3
# * To wait at several points in the boot process: linuxrc.debug=4,wait
Alternativ halt PXE boot starten, tftp server aufsetzen, ...
Viel Spaß,
Volker
--
Volker Kuhlmann
http://volker.dnsalias.net/ Please do not CC list postings to me.
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@xxxxxxxxxxxx
Um den Listen Administrator zu erreichen, schicken
Sie eine Mail an: opensuse-de+owner@xxxxxxxxxxxx
http://en.opensuse.org/Linuxrc enthält eine (AFAIK vollständige) Liste
der möglichen Parameter. Wühle Dich da mal durch ;-)
Spitze, danke Dir, das ist der Schlüssel zur Lösung, die ich dann
hiermit anbieten kann:
http://en.opensuse.org/SDB:Rescue_system_on_disk
title Rescue
kernel /boot/media/boot/x86_64/loader/linux
rescue=hd:/boot/media
keytable=en-us
namescheme=
splash=silent vga=0x318 panic=10
linemode=1 linuxrc.debug=4
initrd /boot/media/boot/x86_64/loader/initrd
(Zeilenumbrüche dienen der Lesbarkeit und müssen entfernt werden.)
Zwingend notwendige Dateien von der Scheibe sind
boot/x86_64/common
boot/x86_64/config
boot/x86_64/loader/initrd
boot/x86_64/loader/linux
boot/x86_64/rescue
content
content.asc
Nach /boot/media kopieren, Struktur beibehalten. Oder halt alles
anpassen.
Weitere Notizen:
# * See http://en.opensuse.org/Linuxrc
# * See console 3 for debug output (default, linuxrc.log=/dev/tty3).
# There seems to be no way to get the log output to file.
# * rescue=... is the same as rescue=1 install=...
# * namescheme= switches back to devices by-device; default is by-id.
# * Without keytable=, loader stops and asks.
# * Without file content, repo is not found.
# * Without file content.asc loader stops and asks.
# * Without "?device=..." all partitions are tried to find the file content.
# To specify device, use rescue=hd:/boot/media?device=/dev/sda3
# * To wait at several points in the boot process: linuxrc.debug=4,wait
Alternativ halt PXE boot starten, tftp server aufsetzen, ...
Viel Spaß,
Volker
--
Volker Kuhlmann
http://volker.dnsalias.net/ Please do not CC list postings to me.
--
Um die Liste abzubestellen, schicken Sie eine Mail an:
opensuse-de+unsubscribe@xxxxxxxxxxxx
Um den Listen Administrator zu erreichen, schicken
Sie eine Mail an: opensuse-de+owner@xxxxxxxxxxxx
| < Previous | Next > |