Karl Weber schrieb: [...]
Horizontal Sync Rate: 31 - 76 kHz Refresh Rate: 59 - 61 Hz Dot Clock Frequency: 175 MHz (2x eingeben) Visible Resolution 1600 x 1200
Wenn ich jetzt nichts weiter ausfuelle, erhalte ich:
Modeline "1600x1200@59" 175.00 1600 1632 2296 2328 1200 1224 1236 1261
Horizontal sync frequency: 75.17 kHz Refresh Rate 59.61Hz.
Hmmm....
Die Daten (oben) habe ich aus der Xorg.0.log [3]
Komisch ist schon mal, dass die ueber das Tool berechnete Modeline nicht mit dem uebereinstimmt, was der Monitor selbst via DDC angibt [4].
Stellt sich die Frage, wie ich die errechnete Modeline in die xorg.conf einbaue. Aktuell sie die so aus:
Diverse Sections der Art
Section "Device" Identifier "fbdev" Driver "fbdev" EndSection Section "Screen" Identifier "fbdev" Device "fbdev" EndSection
und
Section "ServerLayout" Identifier "Layout" Screen "vboxvideo" Screen "vmware" Screen "cirrus" Screen "fbdev" Screen "vesa" EndSection
Bei mir sieht das folgendermaßen aus Section "Modes" Identifier "Modes[0]" Modeline "1680x1050" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync Modeline "1024x768" 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1680x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800 Virtual 2048 1200 EndSubSection SubSection "Display" Depth 16 Modes "1680x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800 Virtual 2048 1200 EndSubSection SubSection "Display" Depth 24 Modes "1680x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800 Virtual 2048 1200 EndSubSection SubSection "Display" Depth 8 Modes "1680x1050" "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1280x720" "1024x768" "1280x600" "1024x600" "800 Virtual 2048 1200 EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Gruß Manfred -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org