Am Dienstag, 15. November 2011, 08:03:45 schrieb Dr. Dietmar Köppe:
Hallo Liste,
habe mir ein neues Notebook angeschafft: Asus N73S Suse 11.4 aufgespielt kernel 2.6.37.6-0.9-desktop
Problem: wlan0 geht
eth0 kann nicht konfiguriert werden (lt. Yast "... weil das Kernel-Gerät nicht verfügbar ist.)
Wo kann ich schrauben? Wo finde ich das passende Attansic Ethernet controller Modul?
Bin für jeden Tipp dankbar
LG
Dietmar
# lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation 2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 0df4 (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 04:00.0 USB Controller: Fresco Logic FL1000G USB 3.0 Host Controller (rev 04) 05:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0)
# hwinfo --netcard 23: PCI 300.0: 0282 WLAN controller [Created at pci.318] Unique ID: y9sn.dTZhla03AE1 Parent ID: qTvu.wTOe6+HWZh6 SysFS ID: /devices/pci0000:00/0000:00:1c.1/0000:03:00.0 SysFS BusID: 0000:03:00.0 Hardware Class: network Model: "Intel WiFi Link 100 Series" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x0083 "WiFi Link 100 Series" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x1305 Driver: "iwlagn" Driver Modules: "iwlagn" Device File: wlan0 Features: WLAN Memory Range: 0xddc00000-0xddc01fff (rw,non-prefetchable) IRQ: 42 (407 events) HW Address: 8c:a9:82:01:28:24 Link detected: no WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 WLAN encryption modes: WEP40 WEP104 TKIP CCMP WLAN authentication modes: open sharedkey wpa-psk wpa-eap Module Alias: "pci:v00008086d00000083sv00008086sd00001305bc02sc80i00" Driver Info #0: Driver Status: iwlagn is active Driver Activation Cmd: "modprobe iwlagn" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #15 (PCI bridge)
25: PCI 500.0: 0200 Ethernet controller [Created at pci.318] Unique ID: Ddhb.VPVWDTPfG+9 Parent ID: HnsE.2oxdyUaNnK8 SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:05:00.0 SysFS BusID: 0000:05:00.0 Hardware Class: network Model: "Attansic Ethernet controller" Vendor: pci 0x1969 "Attansic Technology Corp." Device: pci 0x1083 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x1851 Revision: 0xc0 Memory Range: 0xdc800000-0xdc83ffff (rw,non-prefetchable) I/O Ports: 0x9000-0x9fff (rw) IRQ: 5 (no events) Module Alias: "pci:v00001969d00001083sv00001043sd00001851bc02sc00i00" Config Status: cfg=no, avail=yes, need=no, active=unknown Attached to: #17 (PCI bridge)
Der Umstieg auf 12.1 hat eth0 aktiviert und konfigurierbar gemacht. Danke für Eure Unterstützung. Dietmar -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um den Listen Administrator zu erreichen, schicken Sie eine Mail an: opensuse-de+owner@opensuse.org