Ich bin mal wieder bei dem alten Thema: Kann mir hier jemand sagen, wozu die folgenden Blöcke in /etc/sysconfig/displaymanager sind? --- cut here --- # If the variable contains a fully configured modeline (see default of # DISPLAYMANAGER_RANDR_MODE_auto), the mode is defined and set. # If the variable contains a mode name only, the mode has to be defined # already. # # If a monitor is attached during Xstartup, or when invoking "xrandr --auto" # during runtime, the output is correctly configured and a mode is # automatically selected if none has been used so far. # # Variables are checked according to their extension for # VGA DVI_I DVI_D DVI_A Composite S_Video Component LFP Proprietary # DISPLAYMANAGER_RANDR_MODE_VGA="auto" ## Type: string ## Default: "1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync" # # Mode to use for laptops for DISPLAYMANAGER_RANDR_MODE_* on laptops only, # when the according variable is set to "auto". # (RANDR 1.2 compatible drivers only). # DISPLAYMANAGER_RANDR_MODE_auto="1024x768_60 64.11 1024 1080 1184 1344 768 769 772 795 -HSync +Vsync" --- cut here --- Auf meinem Laptop zu Hause sind in der ersten Sektion n-Zeilen der Art: #DISPLAYMANAGER_RANDR_MODE_xxx="" mit xxx = "verschiedene Namen aus der Liste" Mein Problem ist es immer noch, das der Laptop mit angeschlossenem externen Eizo (1600x1200) immer erst manuell von 1024x768 auf die richtige Auflösung eingestellt werden muss. Kann man hier nicht irgendwie irgendetwas einstellen? Ich blicke hier in die Verwendung der Variablen nicht durch. Und das (halbautomatische) manuelle Umstellen mit [l]xrandr ist mühsam. Andreas -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org