Hallo Sebastian, alle, Am 13.01.2011 11:43, schrieb Sebastian Siebert:
Hallo Werner,
Am 13.01.2011 10:30, schrieb Werner Franke:
Nachgeschaut, es steht nichts von einem Label in menu.lst, sondern wie ich schon oben gesagt habe.
Hat sonst niemand noch Hinweise für mich ?
Also, meine Glaskugel habe ich nicht bei mir. ;-)
Daher bitte mal die Ausgabe von folgenden Befehlen hier nachreichen: # fdisk -l # cat /etc/fstab # cat /boot/grub/menu.lst # cat /boot/grub/device.map # cat /etc/sysconfig/bootloader
Dann schauen wir mal weiter.
cat /etc/fstab # fstab des Hauptsystems auf der Disk1 (320 GB) 28. Oktober 2010 # /dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part1 / ext3 acl,user_xattr 1 1 /dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part4 swap swap defaults 0 0 /dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part3 /export/disk1p3 ext3 defaults 1 2 # /dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJ1MQ715347-part1 /export/disk2p1 ext4 defaults 1 2 /dev/disk/by-id/ata-SAMSUNG_HD103UJ_S13PJ1MQ715347-part2 /export/disk2p2 ext3 defaults 1 2 /dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part2 /home ext3 defaults 1 2
Das mit der Glaskugel ist mir schon klar. Deshalb habe ich ja auch in meiner ersten Mail einige Informationen gegeben und gefragt, wo ich weiter suchen muss. Ich möchte hier nochmal kurz zusammenfassen: OS 11.3 mittels tar von /dev/sdb1 (ext4, 64Bit) nach /dev/sda1 (ext3, war 32 Bit) kopiert. Nicht kopiert wurde /boot/grub und /dev,/proc usw. Angepasst habe ich auf /dev/sda1 /boot/grub/menu.lst und /etc/fstab Beim booten von /dev/sda1 bleibt der boot Prozess stehen bevor /sbin/init beginnt mit: : : Waiting for device /dev/disk/by-id/ata-ST33... to apear: ok fsck from util-linux-ng 2.17.2 [/sbin/fsck.ext4 (1) -- /] fsck.ext4 -a -C0 /dev/sda1 disk1p1: clean, 313694/.... files, .../... blocks fsck succeeded. Mount root device read-write. Mounting root /dev/disk/by-id/ata-ST33...HL-part1 mount -o rw,acl,user_xattr -t ext4 /dev/disk/by-id/ata...-part1 /root /bin/run-init: /sbin/init: No such file or directory [ 21.12345] Kernel panic - not syncing: Atempted to kill init! /dev/sda1 = Label:disk1p1 = ata-ST3320620NS_5QF1Z1HL-part1 /dev/sdb1 = Label:disk2p1 = ata-SAMSUNG_HD103UJ_S13PJ1MQ715347-part1 Der grub Teil im MBR in /dev/sda stammt noch von einer früheren SUSE version 9.X oder 10.x, genau weiss ich das nicht mehr. Da es wahrscheinlich schwierig ist, herauszubekommen woher das ext4 beim obigen /sbin/fsck.ext4 und mount -o rw,.. -t ext4 kommt, wäre es für meine weiteren Aktivitäten wichtig zu wissen, ob nach einer ext3 -> ext4 Konvertierung von /dev/sda1 der im MBR befindliche grub Teil und der von 11.3 32Bit erhaltene /dev/sda1:/boot/grub Teil weiterhin funktioniert oder ob da Probleme zu erwarten sind. Danke und Gruss Werner Hier die gewünschten Informationen: fdisk -l Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xac49ac49 Device Boot Start End Blocks Id System /dev/sda1 * 1 3264 26218048+ 83 Linux /dev/sda2 3265 29373 209720542+ 83 Linux /dev/sda3 29374 38391 72437085 83 Linux /dev/sda4 38392 38913 4192965 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00030958 Device Boot Start End Blocks Id System /dev/sdb1 1 2611 20972826 83 Linux /dev/sdb2 2612 121601 955787175 83 Linux proc /proc proc defaults 0 0 sysfs /sys sysfs noauto 0 0 debugfs /sys/kernel/debug debugfs noauto 0 0 usbfs /proc/bus/usb usbfs noauto 0 0 devpts /dev/pts devpts mode=0620,gid=5 0 0
cat /boot/grub/menu.lst # Modified by YaST2. Last modification on Wed Oct 27 19:52:26 CEST 2010 # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader # # Version fuer das Haupt-System auf der 320GB Disk /dev/sda angepasst fuer 64bit: 05. Januar 2011
default 2 timeout 8 gfxmenu (hd0,0)/boot/message ###Don't change this comment - YaST2 identifier: Original name: linux### title openSUSE 11.3 64Bit (Hauptsystem) root (hd0,0) kernel /boot/vmlinuz root=/dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part1 resume=/dev/disk/by-id/ata- ST3320620NS_5QF1Z1HL-part4 splash=silent quiet showopts vga=0x369 initrd /boot/initrd ###Don't change this comment - YaST2 identifier: Original name: failsafe### title Failsafe -- openSUSE 11.3 64Bit (Hauptsystem) root (hd0,0) kernel /boot/vmlinuz root=/dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part1 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x31a initrd /boot/initrd title Zweit OS (Disk 2) - openSUSE 11.3 64Bit root (hd1,0) configfile /boot/grub/menu.lst ###Don't change this comment - YaST2 identifier: Original name: floppy### title Diskette rootnoverify (fd0) chainloader +1
cat /boot/grub/device.map (fd0) /dev/fd0 (hd0) /dev/sda (hd1) /dev/sdb
cat etc/sysconfig/bootloader|grep -v '^#' LOADER_TYPE="grub" DEFAULT_APPEND="resume=/dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part4 splash=silent quiet showopts" DEFAULT_VGA="0x31a" FAILSAFE_APPEND="showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe" FAILSAFE_VGA="0x31a" XEN_KERNEL_APPEND="resume=/dev/disk/by-id/ata-ST3320620NS_5QF1Z1HL-part4 splash=silent quiet showopts" XEN_APPEND="" XEN_VGA="0x31a" CYCLE_DETECTION="no" CYCLE_NEXT_ENTRY="1" LOADER_LOCATION=""