Raimund Macek wrote:
Am Donnerstag, 2. April 2009 06:51:13 schrieb Kyek, Andreas, VF-DE: [...]
Entweder lieferst du gescheite Information a) Auszug aus /v/l/m b) ggf. ein "fdisk -l /dev/sdc" auf dein USB-Drive
oder Hilfe wird echt schwer. Ich klinke mich bis dahin aus.
Andreas
Hi Andreas Hi Alle
Hat etwas gedauert aber ich schicke Dir nun denVersprochenen Auszug. (Ging genau nach Anweisung vor) Bzw. das ganze Messages aus var/l/M als Anhang. Hoffe es ist nicht zu viel des guten.
--- cut here --- Apr 14 10:35:44 linux-deek kernel: usb 2-3: new high speed USB device using ehci_hcd and address 17 Apr 14 10:35:44 linux-deek kernel: usb 2-3: configuration #1 chosen from 1 choice Apr 14 10:35:44 linux-deek kernel: scsi5 : SCSI emulation for USB Mass Storage devices Apr 14 10:35:44 linux-deek kernel: usb 2-3: New USB device found, idVendor=0dbf, idProduct=9001 Apr 14 10:35:44 linux-deek kernel: usb 2-3: New USB device strings: Mfr=75, Product=57, SerialNumber=44 Apr 14 10:35:44 linux-deek kernel: usb 2-3: Product: MEDION HDDrive2go Apr 14 10:35:44 linux-deek kernel: usb 2-3: Manufacturer: MEDION Apr 14 10:35:44 linux-deek kernel: usb 2-3: SerialNumber: DEF10B8B90F7 Apr 14 10:35:44 linux-deek kernel: usb-storage: device found at 17 Apr 14 10:35:44 linux-deek kernel: usb-storage: waiting for device to settle before scanning Apr 14 10:35:45 linux-deek kernel: scsi 5:0:0:0: Direct-Access WDC WD25 00JB-00GVC0 0000 PQ: 0 ANSI: 0 Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Write Protect is off Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Mode Sense: 27 00 00 00 Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Assuming drive cache: write through Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Write Protect is off Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Mode Sense: 27 00 00 00 Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Assuming drive cache: write through Apr 14 10:35:45 linux-deek kernel: sdc: sdc1 Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: [sdc] Attached SCSI disk Apr 14 10:35:45 linux-deek kernel: sd 5:0:0:0: Attached scsi generic sg4 type 0 Apr 14 10:35:45 linux-deek kernel: usb-storage: device scan complete Apr 14 10:35:46 linux-deek kernel: kjournald starting. Commit interval 5 seconds Apr 14 10:35:46 linux-deek kernel: EXT3 FS on sdc1, internal journal Apr 14 10:35:46 linux-deek kernel: EXT3-fs: mounted filesystem with ordered data mode. Apr 14 10:35:46 linux-deek hald: mounted /dev/sdc1 on behalf of uid 1000 --- cut here --- hier hast Du so 'ne Medion Platte angesteckt; die wurde einwandfrei erkannt und gemountet. Ich werde NICHT die Datei nach einem weiteren Fall durchsuchen; die Arbeit ist von dir zu leistem. Schicke den entsprechend dem obigen Beispiel gleichen Block für eine nicht funktionierende Platte; das Beispiel oben zeigt ein problemfreies Anstecken. Andreas -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org