Am Freitag 03 April 2009 20:28:53 schrieb David Haller: Hallo David,
Konfiguriere sensors mal (sensors-detect), das spuckt dir die nötigen Module aus.
Bei mir mit nforce 570 spuckt sensors-detect aus:
Busdriver 'i2c-nforce2' Driver: w83627ehf Driver: k8temp
==== /etc/sysconfig/lm_sensors ==== MODULE_0=i2c-nforce2 MODULE_1=eeprom MODULE_2=w83627ehf MODULE_3=k8temp ====
Driver `f71882fg' (should be inserted): Detects correctly: * ISA bus, address 0xa00 Chip `Fintek F71882FG/F71883FG Super IO Sensors' (confidence: 9) Driver `k8temp' (should be inserted): Detects correctly: * Chip `AMD K8 thermal sensors' (confidence: 9) #----cut here---- # Chip drivers modprobe f71882fg modprobe k8temp /usr/bin/sensors -s #----cut here----
eeprom hab ich selber noch eingefügt.
==== lsmod ==== w83627ehf 19428 0 hwmon_vid 2528 1 w83627ehf eeprom 5592 0 powernow_k8 12552 1 i2c_nforce2 7000 0 k8temp 4000 0 i2c_core 29916 3 eeprom,nvidia,i2c_nforce2 thermal 19984 0 processor 43152 2 powernow_k8,thermal thermal_sys 11364 3 fan,thermal,processor hwmon 2916 3 w83627ehf,k8temp,thermal_sys =====
lsmod | sort Module Size Used by ahci 34468 8 amd74xx 7152 0 ata_generic 6044 0 binfmt_misc 10068 1 button 8328 0 cdrom 36200 1 sr_mod cpufreq_conservative 8384 0 cpufreq_powersave 2248 0 cpufreq_userspace 4204 0 crc_t10dif 2152 1 sd_mod dm_mod 73904 0 dock 14164 1 libata edd 10272 0 ehci_hcd 54004 0 ext3 140776 1 f71882fg 12260 0 fan 6016 0 ff_memless 8752 1 usbhid floppy 62952 0 forcedeth 56440 0 fuse 57840 3 hid 41216 1 usbhid hwmon 3720 3 f71882fg,k8temp,thermal_sys i2c_core 35200 1 nvidia ide_core 115068 2 ide_pci_generic,amd74xx ide_pci_generic 4652 0 ieee1394 98528 1 ohci1394 ipv6 292168 39 jbd 61736 1 ext3 k8temp 5160 0 libata 183232 4 ata_generic,pata_jmicron,ahci,pata_amd lockd 71536 1 nfs loop 17268 0 mbcache 9484 1 ext3 nfs 288384 7 nfs_acl 3480 1 nfs nvidia 8148328 36 ohci1394 31380 0 ohci_hcd 35284 0 pata_amd 13692 0 pata_jmicron 4104 0 pci_hotplug 31864 1 shpchp pcspkr 3064 0 powernow_k8 14236 1 processor 49088 2 powernow_k8,thermal rtc_cmos 13000 0 rtc_core 21396 1 rtc_cmos rtc_lib 3560 1 rtc_core scsi_mod 178280 5 sr_mod,usb_storage,sg,sd_mod,libata sd_mod 35272 9 sg 35376 0 shpchp 32244 0 snd 73560 21 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_hda_intel,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_hwdep snd_hda_intel 547700 3 snd_hwdep 9072 2 snd_usb_audio,snd_hda_intel snd_mixer_oss 16808 1 snd_pcm_oss snd_page_alloc 9816 2 snd_hda_intel,snd_pcm snd_pcm 91856 3 snd_pcm_oss,snd_usb_audio,snd_hda_intel snd_pcm_oss 48496 0 snd_rawmidi 25792 1 snd_usb_lib snd_seq 61504 0 snd_seq_device 8604 2 snd_seq,snd_rawmidi snd_timer 24968 2 snd_seq,snd_pcm snd_usb_audio 97760 2 snd_usb_lib 18488 1 snd_usb_audio soundcore 8368 1 snd sr_mod 15940 0 sunrpc 213768 23 nfs,lockd,nfs_acl thermal 24392 0 thermal_sys 14336 3 fan,thermal,processor usb_storage 105504 0 usbcore 195904 7 snd_usb_audio,snd_usb_lib,usb_storage,usbhid,ohci_hcd,ehci_hcd usbhid 52512 0 wmi 8160 0 xfs 540576 6
Bei dir dürfte i2c-nforce2 oder i2c-amd756 zuständig sein, welches Modul statt w83627ehf dran ist sollte sensors-detect herausfinden.
HTH
Bis jetzt sehe ich noch nichts. Auch beim XP2700 nicht: Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9) #----cut here---- # Chip drivers modprobe w83627hf /usr/bin/sensors -s #----cut here---- Am Sempron 2400 (wo sensors angezeigt wird): Driver `w83627hf' (should be inserted): Detects correctly: * ISA bus, address 0x290 Chip `Winbond W83697HF/F/HG Super IO Sensors' (confidence: 9) Da ist also kein w83627hf aktiv und sensors wird angezeigt. Al -- Um die Liste abzubestellen, schicken Sie eine Mail an: opensuse-de+unsubscribe@opensuse.org Um eine Liste aller verfuegbaren Kommandos zu bekommen, schicken Sie eine Mail an: opensuse-de+help@opensuse.org